Transcript Slide 1

A-Tool
SECTION: Tools and Equipment
ISSUED: 02-2011
REVISED: ##-####
Objectives
• To provide an understanding of the
following
– Specifications
– Use
– Maintenance
– Safety
Specifications
• High strength steel
• A-type lock puller
• Pry bar formed on
opposite end
• 17” long
• Key tool stored in the
foam grip
Use
• “Through the lock”
forcible entry
• Used with a striking
tool
• Pulls lock cylinders
• Light weight pry bar
– Opens doors, windows,
etc.
Maintenance
•
•
•
•
•
Check overall condition and file any burrs
Remove rust with wire wheel or brush
Clean with warm soapy water
Dry thoroughly
Apply a thin coat of WD40 to any non
painted metal surfaces
Safety
• Wear appropriate PPE
– Minimum of helmet, gloves, and eye
protection
• Full turnouts and SCBA are required when
utilizing tool in an IDLH atmosphere or
when gaining entry into a possible IDLH
atmosphere
• Check surroundings prior to using tool
• Ensure the tool is the right tool for the job