Transcript GE Entrée Card - JohnEriksen.net

GE Entrée Card
● Please protect your access card.
● Do not share it with anyone.
● Report missing or lost cards to
security immediately.
● Official Visitor cards are available.
The System
There are two components in the security system:
Access Card
Card Reader
CARD READERS
There are 4 card readers;
One for each of the 4 rooms.
ADT Alarm System
USING YOUR CARD
Present your green card to the black
“card reader.” You will hear a click
and should then be able to open
the door.
If the door does not open, this indicates:
● You need to press forward on the door then pull!
OR
● You have no permission to the room.
Contact Security!
NEXT
Security Command Keypad
OPENING & CLOSING
PROCEDURE
There are FOUR of these keypads,
one for each room. They are totally
independent from each other.
Security Command Keypad
SYSTEM IS ONLINE
Security Command Keypad
RED LIGHT INDICATES SYSTEM IS ARMED.
Security Command Keypad
16 Keys
ARM
DISARM
Besides the number keys 0-9,
there are 3 basic interface
areas:
1 “Command Key”
1
2
3
5
9
6
0
7
4
8
1 “Back Arrow” key
4 “Select” keys at top
Opening in Morning
1. Present card at Main Entrance
2. At room, enter Combo in X-09
3. Present Green Access card & enter room – alarm will sound.
4. Enter your 4-digit code, then press Command Key
5. At NO – YES choice, choose YES to disarm alarm.
6. Display should now read: “ALL SYSTEMS OFF”
Closing at Night
1. Complete Area Checklist
2. Enter room, close door completely
3. Press Command key once
4. Press key directly below ARM (left side)
5. Enter your 4-digit code
6. At NO – YES choice, choose YES to ARM system.
You have 60 seconds to exit!
7. Spin X-09, then swipe your access card and pull door to
ensure it is locked.
REFERENCES
XR500 Alarm Guide Online:
http://www.atlassecurity.net/documents/XR500%20User%20Guide.pdf