Transcript Kein Folientitel

Kverneland Access
Product information 2014
Kverneland Access
S-tine harrow for seedbed preparation
Access – Content
• Seedbed preparation
• Strong frame and headstock
• Tines
• Quick tines change
• Depth control
• Side deflectors
• Accord Hitch/PTO transfer shaft
• Track eradicators
• Track marker arm holders
• Large rollers range
• Road signs
• Technical data
• Main arguments
Access – Seedbed combination
Access – Strong frame and headstock
•
Strong power harrow headstock able to carry heavy
drills with high hopper capacity like I-Drill (not
compatible with CX Ultra), s-drill & s-drill pro, DA, DF,
Optima, m-drill and m-drill pro
•
Compact frame for a good integration of heavy drills
with lower lifting capacity required
•
3 point linkage Cat II and Cat III
Access – 2 types of tines
Straight tine 45x10 mm:
•
•
•
•
Strong 45x10 mm straight tine for all
conditions (light to heavy)
Can be staggered on 2 or 3 rows
Avoid to bring wet clods on top
The average tine spacing is 150 mm (more
details in technical data)
Levelling tine 45x10 mm:
•
•
•
•
Strong 45x10 mm levelling tine for light
conditions and residues
Can be staggered only on 2 rows
For fast seedbed preparation
The average tine spacing is 150 mm (more
details in technical data)
Access – 2 or 3 rows of tines
336 mm
200 mm
•
Strong 45x10 mm straight tine for all
conditions (light to heavy)
•
2 rows of tines : the distance between the 2
rows is 200 mm
•
3 rows of tines : the distance between the
first and the second row is 336 mm for a
good material flow
•
The average tine spacing is 150 mm (more
details in technical data)
•
Working depth up to 15 cm
Access – 2 or 3 rows of tines
•
3 rows of tines : the 1rst row is bolted in
front of the frame. It is easy to add this
additional row when the machine is
equipped with 2 rows
•
The tine supports are bolted to avoid any
weaknesses on the main frame
Kverneland exclusivity – Tine quick change
•
Good access for changing tine tips : the
tines are fitted on a tine support that can be
easily removed in few minutes for safe
maintenance operations
•
The tine support is only bolted by 2 bolts on
one side. A cone and an anti-rotation stop
are blocking the tines support in the middle
Kverneland exclusivity – Tine quick change
•
For changing tips, the laterals deflectors must be removed (2 pins)
•
•
Remove the lateral tine
Remove the 2 bolts of the
tines support
•
Take away the tines
support
Kverneland exclusivity – Tine quick change
•
Safe and good Access to all maintenance operations :
 Tips can be changed on the workbench. It is not necessary to go underneath the machine
(dangerous and uncomfortable)
 Easy Access to the worn nut of the tips with a grinder (on the workbench).
•
The customer can have a another set of tines in order to save maintenance time during the
seeding season
Access – Depth control
•
•
•
Roller is controlling the depth control
Easy and friendly adjustment
2 different possibilities depending of the seeding coulter bars
Standard roller arms for combination with
precision seeders, mechanical drill carried by
hydraulic lift or mounted drill without coulter
bar connection onto the roller frame
Parallelogram in combination with i-drill or sdrill pro for a fix coulter bar position whatever
the depth is.
Access – Side deflectors
• Mounted on a parallelogram to follow
ground curves
• Long deflector plate for a good soil
guidance and in order to avoid ridges
• The parallelogram is made with high
quality steel to allow flexibility with stones
• The deflectors are hold by 2 pin and can
be removed in few second to get access
to the tines
Accord hitch
• Same “A” triangle as power harrows which is
adapted to Access frame in order to fit all
Accord drills (with long parallelogram)
Straight levelling bar
• Adaptable with 2 rows of tines
• Mechanical depth adjustment by pins
• Spring loaded safety system
• Combinable with track eradicators
• Angle adjustment available
Clod Board levelling bar
• Adaptable with 2 rows of tines
• For active crumbling effect
• Hydraulic depth adjustment
• Combinable with track eradicators
• Agressivity can be adjusted
PTO transfer shaft
• The intermediate transfer shaft is available as an option
• This kit includes the tractor PTO shaft, the transfer shaft
and supports
Hydrolift
• The Access receives the Hydrolift
from the power harrow
• Lifting capacity is 1,6 tones
• It can carry high capacity drills
Access – Track eradicators
• Track-eradicators are fitted on the main frame
• With 3 rows of tines, they are fitted in the line of the tine located at that place on the first row
Rigid track eradicators with
shear bolt protection
Access – Track markers arm holders
I-Drill track marker arms can be fitted on the
Access frame with the track marker holders for:
- Better track marker stability,
- Less strain on the coulter bar
- Lower required lifting capacity
For a safe transport, the Access can
be equipped with road signs
- Front ones (2 units)
- Lateral one and rear ones (4 units)
Access – Large roller offer
• Cage roller  550 mm
or reinforced cage roller
ø550mm (not compatible
with I-Drill) – 10 bars
• Packer roller
 500 mm & 585 mm
• Flexline roller  585 mm
Access – Heavy Actipack roller
Actipack roller ø 560mm
•The knives are cutting bigger clods coming in the disc
spacing of 12,5cm leaving a ready seedbed
• Heat treated discs for better resistance.
• Skid and knives between discs cleaning
even in wet and sticky conditions (option)
• Shaft diameter: 50 mm
• Knives pressure can be
adjustable as high as the
disc pressure to the ground
to make equal pressure
through the working width,
and can also be put in a non
working position to leave a
rough ground surface.
Access – Technical data
Working width (m)
Maximum HP
Tine spacing with 2 rows of straight tines
Number of tines
2 rows
Tine spacing with 2 rows of straight tines
Number of tines
Tine spacing with 3 rows
3 rows
Number of tines
Front box section
frame
Rear box section
packer roller Ø 500 mm
Weight (kg) packer roller Ø 585 mm
für Access 3 cage roller Ø 550 mm
Flexline roller Ø 585 mm
rows
Actipack roller Ø 560 mm with knifes
Type of tines
Roller attachment
Accessories
Seed drill combination possible
3.00
180
162
18
302
18
162
20
3,5
4.00
200
220
155
163
22
24
296
289
22
26
155
150
22
26
100 x60 x 6 mm
120 x 80 x 8 mm
961
1054
1159
1088
1197
1319
810
882
963
1191
1316
1453
1186
1321
1533
Straight or leveling tine 45 x 10 mm
Standard arms or parallelogramm for Pro connection
Accord triangle, Hydrolift, track- eradicators, PTO
transfer shaft, track marker holders, Crossboard
I-drill (w/o CX Ultra), DF- 1, s-drill, DA, m-drill/ m-drill
Pro, Optima, Optima HD
Access – Main arguments
•
•
•
•
•
•
•
•
•
•
2 or 3 rows (straight tines) of tines
Levelling or straight tines
3.00 to 4,00 m rigid
Quick tines change support for easy and safe
maintenance
Strong, light and compact (easy to lift)
Combination with all
Accord drills (except i-drill with CX ultra
coulters)
Perfectly adapted for operation
in light to medium soil.
Can match with all heavy rollers in KV range
Large roller offer
With little wear and high output
performance, the Access is a real alternative
Kverneland Access S-tine combination:
Solo or in combination – a real alternative !
visit us at www.kvernelandgroup.com
The Future of Farming
www.kverneland.com
See our
Machines
at work
on YouTube