Transcript Dias nummer 1

Vicon subsoiler - Terra PL
Product Information 2013
Terra PL
Frame concept
•
Range :
– 4 to 8 tines bolted onto the fram
– working width 3 and 4 m.
•
Single beam box section 200 x 200 x 10 mm
– Linkage cat II & III
– High Beam clearance of 1175 mm for
good material flow
– Working depth down to 40 cm
Tines
•
•
•
For loosening from 15 down to 40cm
Curved tine with wearing plate and reversible
share.
Power requirement: 25hp/tine
•
Loosening by lifting up and cracking the soil
 No sole will be created
 No gap of air
 Soil is not mixed up, respect of the
structure
 Top layer stays flat and even, to allow
easy further ground preparation and
power harrow operation
 Stones are not lifted up
Safety system
•
Shear bolted leg (120 kg bolt)
•
tine mounted on a special rocking plate
so that the complete tine and tine holder is
pivoting towards the front without touching
the rear equipment
•
Safe in working position and compact by
transport
Rear linkage for combination
•
•
•
Cat II linkage to couple a drill combination
Linkage moving back for compact transport
and safety in working position
Those arms will be replace by other
holding parts when using a roller or gauge
wheels
Gauge wheels
•
•
•
Wheels 235/75 x 15
Adjustment by pin
2 assembly possibilities :
 Outside the width
 Inside on the rear linkage arms
Cage roller
•
•
•
Cage roller Ø 550 mm :
 10 bars
 Self aligning and greasable bearings
Good crumbling and levelling in dryer
conditions
Good depth control
Packer roller
•
•
•
•
•
Packer roller 500 mm
 Ø 500 mm
 Self aligning and greasable bearings
Fitting arms to sub frame
Individual scraper adjustment
Good firming
Individual crest for better cleaning
Terra PL - technical datas
Type
Working width Transport width
Number of tines
(m)
(m)
Weight (kg)
Max. Power
(hp)
TPL 304
3,00
3,00
4
800
250
TPL 306
3,00
3,00
6
1000
250
TPL 406
4,00
4,00
6
1100
300
TPL 408
4,00
4,00
8
1300
300