Transcript Kverneland KTB

Kverneland TLC & TLD
Product information 2015
Kverneland TLC & TLD
S-tine harrow for seedbed preparation
TLC & TLD – Content
• TLC- Concept
• TLD - Concept
• Pulling device
• Depth control
• Levelling bar
• Clod board
• Track eradicator
• Rear equipment
• Technical data
• Main arguments
TLC – Working width from 4.5 to 6.1m
• Working width from 4.5 to 6.1 m
• Frame build in 3 sections
• 4 rows of tines
• Under beam clearance 420 mm
• Depth control with 3 wheels
TLC – Transport width 2.5m
• Available as 4.5m, 5.1m, 6.1 m
• Frame with bars 80 x 80 x 8 mm
• 3 point linkage cat. 2
• Transport width 2.5 m
• Folding by 1 double-acting cylinder
• Hydraulic valve for locking in transport
TLC – 4 rows of tines
• 4 rows of tines
• Row distance 450mm.
• Tine distance 100mm.
• 4 available tines :
1 - 32 x 10 mm semi curved S-Tine
2 - 45 x 10 mm semi-curved S-Tine
3 - 45 x 10 mm straight S-tines
4- DK tine P22
TLD – Working width from 6.1 to 9.1m
• Working width from 6.1 to 9.1m.
• Frame build in 3 sections
• 5 rows of tines for a better flow of
materials through the machine
• Under beam clearance 420 mm
• Depth control with 3 wheels on 6.1m and
5 wheels for other models up to 9.1m
TLD – Transport width 2.5m
• Available as 6.1m, 7.1m, 8.1m, 9.1m
• Frame with bars 100x100x 8mm
• 3 point linkage cat. 2 and 3
• Transport width 2.5m
• Folding by 1 double action cylinder on 6.1m and 2
cylinders on 7.1m, 8.1m and 9.1m
TLD – 5 rows of tines
• 5 rows of tines provides better material
management with higher clearance between
tines avoiding blockage
• Row distance 340mm.
• Tine distance 100mm.
• Available tines :
1 - 32 x 10 mm semi curved S-Tine
2 - 45 x 10 mm semi-curved S-Tine
3 - 45 x 10 mm straight S-tine
4- DK tine P22
TLC & TLD – Depth control
• 2 wheel types available:
- Steel wheels 500x165mm
- Pneumatic wheels 600x9mm
• Exact depth adjustment with handle and scale
• 3 wheels on TLC
• 3 (TLD 6,1 m) to 5 wheels on TLD
• equipped with scrapers
TLC & TLD – Levelling bar
• Spring loaded levelling bar
• Made of tube
• Height adjustment by pin
• Angle adjustment in 3 position
• Shear bolted
TLC & TLD – Clod board
• The Clod board is chattering clods and
doing very effective and active levelling
• Mechanical or hydraulic adjustable from
the tractor cab
• Closer centre of gravity with the new
TLC&TLD generation (October 2009
onwards)
• Can be adapted on all TLC&TLD from
October 2009.
TLC & TLD – Track eradicators
Non Stop track-eradicator
• Fast and easy depth adjustment with pin
• Easy sideways adjustment to match with all track widths
• Spring loaded protection to run in hard stony and
compacted soil with safety
Pig Tail tine sq. 22 with standard share 40x8mm
• Depth adjustment with bolt and counter bolt
• Tines sliding on the support to match with track and
tyre width
• This tine is providing good vibrations to brake up
tracks in lighter soil conditions.
TLC & TLD – Rear equipment
Double crumble roller front : Ø 310mm /
rear Ø 280mm:
• Different Ø offer better crumbling effect and by
projecting bigger clods higher insure perfect final
top layer where small clods are still on top and fine
soil underneath
• Friendly adjustment without tools
• Compatible with intermediate finger harrow
• Available on the whole range (From October 2009)
• Rear folding cylinder rod protected by a plate
TLC & TLD – Rear equipment
Single crumble roller Ø 310mm
• Good crumbling effect
• Spring loaded adjustable
• Compatible with intermediate finger harrow
• Rear folding cylinder rod protected by a plate
Single finger harrow
• Spring loaded adjustable
TLC & TLD – Technical data
TLC & TLD – Main arguments
• 4 or 5 rows of tines for a fine and
levelled seedbed preparation
• Narrow transport width at 2,50 m
• Large choice of tines for all conditions
• Clod board possibility on the whole range
• Large offer of rear equipment for a fine
seedbed preparation.
• Working depth controlled by wheels
inside the frame
Kverneland TLC & TLD S-tine harrow:
High performance seedbed preparation!
visit us at www.kvernelandgroup.com
The Future of Farming
www.kverneland.com
See our
Machines
at work
on YouTube