Transcript Hampson-Russell

Hampson-Russell
For Windows
Geoview
Elog
Strata
1
2
3
Files needed for this E-module can be downloaded from the next slide
Geoview
Elog
Strata
Files needed for this EDB-module can be downloaded here:
http://www.ipt.ntnu.no/e-learning/seismics/
Download the six files described below and store them in the same directory on
your computer. The files should be stored on the same drive as HampsonRussell.
1. Well_1.dat contains
 Depth, true vertical (TVD)
 P-velocity
 S-velocity
 Density
 Acoustic Impedance (AI)
 Elastic Impedance at 36
 EI(36) / P-velocity
2. fmtop_Well_1.dat contains the
formation tops
4. horizons contains the horizon for
the seismic line
5. and 6.
Near.sgy and Far.sgy are segyfiles containing respectively
near- and far offset PP stack.
The files contains 110 traces and
Well_1 is located at CDP 37.
The utm x and y positions are
removed from the trace header.
Average angle of the far offset
PP stack is 36
3. Well_1_TD.las contains a timedepth table necessary for a ‘check
shot correction’
Info
References