Welcome The Alberta Department of Energy provides GeoView as a mapping system to enable users to find geographic information in Alberta. To the GeoView.
Download ReportTranscript Welcome The Alberta Department of Energy provides GeoView as a mapping system to enable users to find geographic information in Alberta. To the GeoView.
Slide 1
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 2
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 3
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 4
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 5
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 6
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 7
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 8
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 9
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 10
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 11
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 12
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 13
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 14
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 15
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 16
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 17
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 18
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 19
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 20
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 21
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 22
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 23
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 24
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 25
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 26
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 2
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 3
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 4
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 5
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 6
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 7
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 8
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 9
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 10
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 11
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 12
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 13
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 14
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 15
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 16
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 17
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 18
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 19
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 20
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 21
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 22
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 23
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 24
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 25
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26
Slide 26
Welcome
The Alberta Department of Energy provides GeoView as
a mapping system to enable users to find geographic
information in Alberta.
To the GeoView - Editing for OASIS
Online Training Course
GeoView can be launched from within a specific
application such as OASIS.
This module outlines the functionality of the Edit feature
in GeoView.
Please complete the GeoView Overview module before
proceeding with this module
Page 1 of 26
Revision
Date
Revisions Type
Page Number
May 30, 2013
Updates
All
Page 2 of 26
Introduction
In this module you will learn how to access
and use the:
• Online map (Geoview)
How to Launch Map
Screen Layout
Information Panel and Map Layers
• How to navigate the map
Toolbar
Zoom in
Pan
• GeoView Editing for OASIS.
Edit Tab
How to Add Land(s)
How to Remove Land(s)
Note: As this course demonstrates the use of the GeoView tool, the data in some instances may not portray the actual Crown
or Freehold ownership.
Page 3 of 26
How to Launch Map - ETS
1. To Log on to the ETS web site:
Enter the ETS User ID issued by the Site
Administrator (EN####_accountname) into the
User Name field.
This field is NOT case-sensitive.
2. Enter the Password: This field IS casesensitive.
3. Click the Login button:
Save my user name: If you check this box, ETS
will save your user name on the site so you do
not have to enter it every time you log in.
Page 4 of 26
How to Launch Map – Tree Node
Page 5 of 26
How to Launch Map – Launch Map
To access the Online map,
select ‘Launch Map’ from the
ERCB tab in the application
under Proj. Desc.
Launch Map will allow Primary
Owner to Edit Application Lands
Scheme Entered & Saved will default available Lands on map and Land Tab
Page 6 of 26
Screen Layout
The GeoView screen display has three main
sections:
1. Toolbar Area
• Toolbar Area
• Information Panel
• Map Window
The Toolbar Area contains numerous tools
that are used to move around the map, find
or search information on the map, print the
map, etc. These tools are categorized into
high-level groups: Getting Around, Maps and
Data Sources, Tasks and Analysis.
The Information Panel shows different kinds
of information when you interact with the
map. For example, this panel displays the
Map Layers where you can select different
layers to hide or show on the map.
The Map View shows the map window
where you can interact with the map by
zooming, panning, annotating or right-clicking
to get more information.
2. Information Panel
3. Map View
Page 7 of 26
Information Panel and Map Layers
Map Layers control the display of the Map Layers List. You can check or uncheck the map layers according to your
requirement. You can also control the visibility and transparency of the map using the sliders.
Page 8 of 26
Information Panel and Map Layers – Layer Group and Layer Name
The Information Panel display consists of a Layer Group and Layer Names. When the Layer Group is expanded, the
Layer Names will be visible. You can check/uncheck the Layer Group and Layer Names to control visibility in the map.
The display of the Layer Group will override the display of the Layer Names.
Layer
Group
Layer
Names
Page 9 of 26
Information Panel – Map Legend
The Map Legend show the corresponding legend for the layers used in map. You can toggle between Show Legend or
Show Layer.
Page 10 of 26
How to Navigate Map – Toolbar
Several Navigation Tools are available to navigate the map under the Getting
Around Tab
Zoom-in and Zoom-Out take you 2x into the map or out of the map
depending upon the option selected.
Page 11 of 26
Getting Started - Pan
Page 12 of 26
Getting Around – Zoom In
Page 13 of 26
GeoView – Editing for OASIS
Edit tools are available only if:
a) Application has Project, Potentially Includable
lands & Leases (PILL), or available lands via the
added Scheme.
b) User represents the Primary Owner,
And
c) User is the Creator, or assigned Creator/Delegate.
LEFT Panel can display:
List of Map Layer or Legend
- Map Layers (Layer Display controls), or
- Show Legend: (Color/Patterns)
Lands Selected (via Edit)
Land Key Results (Application Lands)
Results of queries *
Results of land selection *
* details in GeoView Overview module
Page 14 of 26
Toolbar – Edit Tab
Use these tools:
To:
Defines at which level the lands can be selected. Eg. Section, ¼ section, lsd, or quadrant.
.
When option is selected, a mouse click or click and drag will either select or unselect lands.
(1st click is to select, 2nd click on same lands is to unselect).
Current selected lands are cleared.
Page 15 of 26
Toolbar – Edit Tab (Continued)
Use these tools:
To:
The data layer to be edited Eg. Application Added Lands.
Action to add Selected lands to Editing Layer
Action to remove Selected lands from Editing Layer
Page 16 of 26
How to – Add Land(s)
Overview of Steps:
The first step is to
select the Land(s)
1. Select ATS Grid
Level
2. Click Select
Land(s)
3. Select appropriate
Editing Layer
4. Click on the map to
select the Land(s)
Page 17 of 26
Add Land(s)
1. Selected Lands will be
identified in Information
Panel under Selected
Land(s)
2. After Land has been
selected, click on Add
Land(s)
Page 18 of 26
Edit – Add Validation
After clicking on Add Land(s),
a validation screen is
displayed.
Click on Apply to continue.
Allowed lands will be
identified. Lands not allowed
will have an error.
Page 19 of 26
Edit – Land Keys
The Land Keys Tree will
display those lands which
are in the application at the
time of last saved action and
land boundary will be
adjusted accordingly.
Land Keys sort order are as
follows:
• Meridian
• Range
• Township
• Sections
• Quarter Sections
• Legal Sub Divisions
• Quadrants
Page 20 of 26
How to Remove Land(s)
Previously Added
Land can be removed
by following these
steps
Page 21 of 26
Edit – Remove Validation
After clicking on Remove
Land(s), a validation screen is
displayed.
Click on Apply to continue.
Cancel will close popup and return back to edit session
Page 22 of 26
Removed Land Keys
Page 23 of 26
Validation Results - Errors
While editing, if an action is performed which is contrary to the
Business Rules allowing the action, a warning window will
appear. Here are some examples:
Page 24 of 26
Closing the Map
Page 25 of 26
Congratulations!
Conclusion
You have completed the GeoView – Editing for
OASIS Online Training Course
Supplemental training materials are available and can be accessed
from the Alberta Energy Online Learning home page under:
• Interactive Map – GeoView System Overview 10.1
• Oil Sands – Create New OSR Project Application
• Oil Sands – Create an Amendment OSR Project Application
If you have any comments or questions on this training course,
please forward them to the following email address:
MOGIS SUPPORT: [email protected]
Page 26 of 26