Transcript Downstream Products-2011.1 - Sinopec
DOWNSTREAM PRODUCTS SINOPEC International
Edition 2011.1
Your Solution to China Sourcing
SINOPEC International
Downstream Products
SINOPEC International
Contact
Downstream Products
Furnace Tower Reactor Heat Exchanger Non-ferrous Equipment Compressor Pump Distributed Control System
Contact
Mr. Guan Jian Mr. Wang Zhong Bo Ms Li Jia Ms Liao Min Mr. Wang Jia Yue
SINOPEC International
1 Furnace
Cracking Furnace Reforming Furnace Square Box Type Heater Cylinder Type Heater
SINOPEC International
1.1 Cracking Furnace
• • • • • • • •
Type :
Ethylene Cracker
Max. Capacity :
190,000.00T/Y
Material :
Carbon steel/stainless steel/ High alloy/Low alloy
Standard :
ASME/ API530/API560
Max. operating pressures :
0.4MPa
Max. design temperatures :
1125 ℃
.
Certificate :
ASME, PED
Designed by :
Technip, S&W, Lummus, SEI,SSEC
900kt/a Ethylene Cracking unit in Thailand
SINOPEC International
1.2 Reforming Furnace
• • • • • • • •
Type:
HYCO Reformer Synthetic Reformer Hydrogen Reformer
Max. Capacity:
Hydrogen Reformer :100,000.00 Nm3/h, Carbinol Reformer: 850,000.00T/Y
,
HYCO Reformer: 700,000.00T/Y
Material
: Carbon steel/stainless steel/ High alloy/Low alloy
Standard
: ASME/ API530/API560
Max. operating pressures:
3.85Mpa
Max. design temperatures:
985 ℃
Certificate:
ASME, PED
Designed by:
Technip, Davy,Linde, Lurgi, SEI,LPEC
120k m 3 /h HYCO Reformer in SINOPEC-YPC
SINOPEC International
1. 3 Square Box Type Heaters
• • • • •
Type:
Atmospheric and vacuum distillation Heater Gasoline Hydro treating Heater Diesel oil Hydro treating Heater Hydro cracking Heater Catalytic cracking Heater Pyrogenic Heater Reforming extraction heater
Material:
Carbon steel/stainless steel/ alloy
Standard:
ASME/ API560,API530
Certificate:
ASME, PED
Designed by:
Technip, Lummus ,Kirchner ,SEI,LPEC
2.8MT/Y Diesel oil Hydro treating Heater in SINOPEC-FUJIAN
SINOPEC International
1. 4 Cylinder Type Heaters
• • • • •
Type:
Atmospheric and vacuum distillation Heater Gasoline Hydro treating Heater Diesel oil Hydro treating Heater Hydro cracking Heater Catalytic cracking Heater Pyrogenic Heater Reforming extraction heater
Material:
Carbon steel/stainless steel/ alloy
Standard:
ASME/ API560,API530
Certificate:
ASME, PED
Designed by:
Technip, Lummus ,Kirchner ,SEI,LPEC
2.1MT/Y Hydro cracking Heater in SINOPEC-FUJIAN
SINOPEC International
2. Tower General Description:
Large size(Max. Diameter: 12m,Max. Length: 140m,Max. Weight: 1500t) Size control including straightness,levelness, welding,PWHT is our strength The overall delivery, logistics advantages Petrochemical plants and chemical installations units
SINOPEC International
2.1 Tower – Refining Project, Atmospheric & Vacuum Plant
–
Features:
Materials ： CS + 410S Dimensions ： D- 10.8m L- 50m T （ 42+3 ） mm W- 255T
Vacuum Column
for Sinopec Qingdao refinery (Ф10800 )
SINOPEC International
2.2 Tower - Refining Project, Coking Plant
–
Features:
Materials ： SA387 Gr11 Cl2 + 410S Dimensions ： Diameter- 9.6m Length- 42m Thickness （ 50+3 ） mm Wight- 386T
Coke Drums
For India ESSAR Group (Ф9600, 489ts) Number: 6
SINOPEC International
2.3 Tower - Ethylene Project, Ethylene Plant – Features:
Materials ： CS Dimensions ： Diameter - 6.6m Length - 66.7m
Thickness - 52mm Wight- 597T
Propylene Column No.1
For Sinopec Zhenhai Refinery (Ф6600, 597ts)
SINOPEC International
2.4 Tower - Ethylene Project, Ethylene Plant – Features:
Materials ： CS Dimensions ： Diameter- 11.4m Length- 60.6m
Thickness- 34mm Wight- 767T
Quench Tower
For Sinopec Zhenhai Refinery (Ф11400, 767ts)
SINOPEC International
2.5 Tower - EO/EG Plant – Features:
Materials ： CS+304L Dimensions ： Diameter -9.0m Length- 47.1m
Thickness- (100+3)mm Wight - 847T
Main Wash Column
For Sinopec Zhenhai Refinery (Ф9000, 847ts)
SINOPEC International
2.6 Tower - PX Project – Features:
Materials ： CS Dimensions ： Diameter- 8.8m/7.4m Length- 120.7m
Thickness- 91mm/54mm Wight- 1092T
Xylenes Rerun Column
For Dragon Aromatics (Zhangzhou)Co.Ltd (Ф8800, 1092ts) Number: 2
SINOPEC International
2.7 Tower - PTA Project – Features:
Materials ： S32205 Dimensions ： Diameter- 4.4m Length- 41m Thickness- 20/16mm Wight- 89T
Solvent dehydration Column
For Sinopec Yangzi PetroChemical (Ф4400, 89ts) End
SINOPEC International
3 Reactor General Description:
Design as per specific customer requirements, and international codes and standards.
Quality assurance: U ,U2 stamps by ASME.
The quality systems are covered under ISO 9001 ,ISO 14000… The quality systems are backed by the latest facilities for radiography, including 12 MeV linear accelerator ,ultrasonic (including TOFD ), maganetic particle & liquid penetrant examination.
The reactors cover the guarantee against defects of mechanical design, fabrication, inspection and testing.
Supply these materials as per ASME/ASTM. In case of oversized of reactors, we can also complete at Site.
SINOPEC International
3.1 Reactor-Brief Introduction
FEA Stress Analysis for Reactors
SINOPEC International
3.2 Reactor-Forging – Features :
Material: 2-1/4Cr-1Mo (SA336 F22.3), 2-1/4Cr-1Mo-1/4V(SA336 F22V) + Overlay Weld Diameter: ≤6500 mm Wall thickness: ≤336 mm Pressure: ≤21 MPa Temperature: ≤482 ° C Licensor: UOP, Chevron, AXENS
2050
Tons Weight
Direct Coal Liquefaction Reactor
SINOPEC International
3.3 Reactor-Plate – Features:
Material: 21/4Cr-1Mo(SA387 Gr22.2) 21/4Cr-1Mo-1/4V(SA542 D.4a) Wall thickness: ≤200 mm Pressure: ≤15 MPa Temperature: ≤454 ° C Licensor: UOP, Chevron, AXENS
SINOPEC International
3.4 Continuous Reforming Reactor – Features:
Material: SA387 Gr.22.2
Diameter: ≤4000 mm Wall thickness: ≤100 mm Pressure: ≤2.7 MPa Temperature: ≤555 ° C Licensor: UOP
SINOPEC International
3.5 LLDPE Reactor
– Features:
Material: Alloy Steel Diameter: φ8060/φ5000 mm Height: 43 m Weight : 405 ton Pressure: 2.8 MPa Temperature: 170 ℃ Licensor: UNIVATION, SINOPEC TECH.
LLDPE Reactor for 300 KTA LLDPE Plant
SINOPEC International
3.6 HDPE Reactor
– Features:
Material: LTCS, SS Leg Height: 62 m Pressure: 6.4 MPa Temperature: -46 ℃ Licensor: INEOS 、 SHERVON PHILIP
300 KTA HDPE Reactor with INNOVENE Process Technology
SINOPEC International
3.7 PP Reactor – Features:
Process Capacity : ≤ 450 KTA Material: LTCS, SS Pressure: 6.4MPa
Temperature: -46℃ Licensor: SINOPEC TECH.
， BASELL ， DOW ， TECHNIP ， JBS
300 KTA PP Reactor with SINOPEC Process Technology
SINOPEC International
3.7 PP Reactor 450KTA PP Spherizone Reactor with Basell Technology Newly Process Technology of Basell Spherizone 450KTA PP Plant
SINOPEC International
3.7 PP Reactor Key Reactor for 300 KTA PP Plant with DOW Process Technology
SINOPEC International
3.8 Styrene Reactor
– Features:
Process Capacity: ≤ 320 KTA Pressure: 0.81 MPa Material: 800HT, 304H Temperature: 900 ℃ Weight: 180 ton Licensor: ABB LUMMUS, UOP, MONSANTO
240 KTA Styrene Reactor with UOP Process Technology
SINOPEC International
3.9 EO Reactor – Features:
Material: SA302 GR.C, SA789 S31803, SA508 GR.3, or GB equal.
Diameter: 6760 mm Tube Length: 13 m Weight: 850 ton Pressure: S: 6.58 MPa T: 2.334 MPa Temperature: S: 288 ° C T: 325 ° C Licensor: SD, DOW, SHELL Φ
6760 EO Reactor with SD technology
SINOPEC International
3.10 POSM Reactor – Features
: Material: SB463-UNS N08020 Diameter: 4300 mm Length: 15 m Licensor: LYONDELL
Dehydration Reactor for 240 KTA POSM Plant
SINOPEC International
3.10 POSM Reactor – Features:
Material: 304L SS clad CS Diameter: 9300 mm Length: 36.2 m Weight: 355 ton Licensor: LYONDELL
Oxidation Reactor for 240 KTA POSM Plant
SINOPEC International
3.11 Styrene Reactor – Features
: Material: SA240-304H/SB409/UNSNO8811/ SA312-TP304H Diameter: ≤5900mm Wall thickness: ≤48mm Weight: 499 ton Licensor: BP
SINOPEC International
3.12 Acrylonitrile Reactor – Features
: Material: SA387 Diameter: 8900mm Wall thickness: ≤30mm Weight: 473 ton
SINOPEC International
3.13 Other Reactor – Features
: Gasoline Oil Absorbing Desuldurization Reactor Process Capacity: 1500 KTA Material: Alloy Steel +SS Overlay Weld Pressure: 4.86 MPa Temperature: 470 ℃ Licensor: SINOPEC TECH., CONOCO PHILLIPS
Gasoline Oil Absorbing Desuldurization Reactor
End
SINOPEC International
4 Heat Exchanger General Description:
Shell and Tube Heat Exchanger
; Fixed tube sheet: AEM, BEM U bundle: AKU,BKU Floating head: AES, AET, BES, BET
Type
: Double Tubesheet Heat Exchanger; Double Pipe Heat Exchanger; Spiral Heat Exchanger; Helical Baffle Heat Exchanger; Gas Cooler; Screw Lock Ring Heat Exchanger; Various Enhanced Tube Heat Exchanger
Codes & Standards
: ASME Section VIII Div.1 PED; AS1210; API; RINA; NR-13
Materials
： CS / SS / Duplex / Ni / Cu / Ti / Zr / Ta
Dimensions
： D-6m/ L-22m /s= 20000m 2
SINOPEC International
4.1 Heat Exchanger - Double Tubesheet Heat Exchanger – Features
: Tube side medium and shell side medium completely separated. Any case when two media cannot be mixed.
SINOPEC International
4.2 Heat Exchanger - Double Pipe Heat Exchanger
–
Features:
Higher flow rate enhances the heat transfer Simple structure, easy to fabricate and disassemble Bearing higher pressure Application Fields: Small scale heater, cooler, condenser
SINOPEC International
4.3 Heat Exchanger - Spiral Heat Exchanger – Features:
Higher heat transfer coefficient than shell-tube heat exchanger Compact design with large heat transfer area Anti-fouling with self-cleaning Allows large temperature difference Application Field: Heaters, coolers, condensers and evaporators in food industry and chemical industry.
SINOPEC International
4.4 Heat Exchanger - Helical Baffle Heat Exchanger – Features:
Overall heat transfer coefficient increased by 30% Pressure drop reduced by 20% Dead zone eliminated and fouling is reduced Flow-induced vibration is prevented Application Fields: Water-water coolers, oil-oil preheat exchangers Gas-gas heat exchangers, gas-liquid heat exchangers, compressor aftercoolers, reboilers and condensers, etc.
SINOPEC International
4.5 Heat Exchanger - Gas Cooler – Features:
Main Technical Advantages: mainly applied in PP/HDPE/LDPE/LLDPE plants; utilizing the annealed stainless steel tubes and with the fluidized tube end of heat exchangers that are specially designed and machined to ensure the powder medium not to be accumulated or scaled or deposited on the inner wall during the transmission and reaction process. Single Line Processing Capacity: 450 KTPY Main Materials: LTCS, SS Maximum Operation Temperature: -46 ℃ Maximum Operation Pressure: 6.4Mpa
Main Design Standard: ASME, PED, GB Main Licenser: SEI, BASELL, DOW, TECHNIP, JBB
SINOPEC International
4.6 Heat Exchanger - Screw Lock Ring Heat Exchanger – Features
: Application: Hydrogenation Cracking System Diameter: up to 1.8m
Temperature: up to 450 degree Pressure: up to 20MPa
SINOPEC International
4.7 Heat Exchanger - Corrugated Tube Heat Exchanger – Features:
Heat transfer coefficient 1.2-2.4 times more than smooth tubes Corrugation can compensate temperature difference stress Intensified turbulent flow reduces fouling remarkably Application Fields: Heating, cooling, boiling and condensing Liquid-liquid HE, Liquid-gas HE, Gas-gas HE, Condensers, waste heat boiler
SINOPEC International
4.8 Heat Exchanger
-
Corrugated Low Finned Tube Heat Exchanger – Features:
Heat transfer coefficient 1.3-2.2 times more than smooth tubes Intensified turbulent flow reduces fouling remarkably Shallower and wider grooves on the external walls are better for draining of condensate and make liquid films thinner Application Fields: Heating, cooling, boiling and condensing Liquid-liquid HE, Liquid-gas HE, Gas-gas HE, Condensers, Waste heat boiler, reboiler, and vapor generator
SINOPEC International
4.9 Heat Exchanger - T-shaped Finned Tube Heat Exchanger – Features:
Boiling heat transfer coefficient 2-4.8 times more than smooth tubes The wall superheat is remarkably lower Self-cleaning reduces fouling Lower operation cost （ Φ2600mm;89t ）
SINOPEC International
4.10 High Exchanger - Internally Grooved Tube Heat Exchanger – Features:
Heat transfer coefficient 1.3-3.5 times more than smooth tubes Pressure drop is similar to that in smooth tube End
SINOPEC International
4.11 Heat Exchanger - Air Cooler Max. size:
(Length) 15m x (Width) 6m
Max. weight :
28 ton
Material:
Carbon steel/stainless steel/ alloy
Standard:
ASME/ API661
Max. operating pressures:
700 bars
Max. design temperatures:
650 o C.
Application:
Refineries, GTL and Petrochemical Industry
Certificate:
Germany TUV ISO9002 Quality System
SINOPEC International
4.11 Heat Exchanger - Air Cooler A. Induced Draft Unit
The induced draft unit gives a steady and endurable thermal performance due to the protection of the finned surface against wind, rain and snow by the plenum chamber. The induced draft also ensures better air distribution, less hot air recirculation, less fouling and lower noise levels at grade.
SINOPEC International
4.11 Heat Exchanger - Air Cooler B. Forced Draft Unit
The forced draft unit allows an easy access for maintenance to the bundles. Furthermore, the fans remain in the cold ambient air temperature and allow high process inlet temperature as well as with a long life.
SINOPEC International
4.11 Heat Exchanger - Air Cooler C. Humidified Air Cooler
The combination of air cooler and humidification section is a good solution in some dry areas and hot climates. The ambient air is cooled by direct contact with water in the humidification section, which further reduces the temperature of process streams and improves the heat exchange for a fixed set of process temperature.
SINOPEC International
4.11 Heat Exchanger - Air Cooler D. Recirculation Unit
In very cold climates (RUSSIA, CANADA and ALASKA of USA) and also for special process, it is necessary to provide hot air recirculation to prevent freezing or congealing. Different types of hot air recirculation are possible thanks to various combination of louvers, steam coils, auto variable fans and / or variable speed.
SINOPEC International
4.11 Heat Exchanger - Air Cooler E. Air Cooled Vacuum Steam Condenser
This anti-freeze steam condenser is supported on an A-frame steel structure equipped with a vacuum package system including tanks, pumps and control devices. End
SINOPEC International
5 Non-ferrous Equipment General Description:
Materials ： Duplex / Ni / Cu / Ti / Zr / Ta/ Codes & Standards ： ASME PED 、 SAMSUNG 、 S&W 、 TECHNIP 、 TEMA 、 UHDE 、 UOP 、 BASF BAYER 、 BP 、 CTCI 、 FOSTERWEELER 、 HITACHI 、 KTI
SINOPEC International
5.1 Non-ferrous Equipment – Duplex Heat Exchanger – Features:
Material: AL-6XN (SB688)- 6 ％ Mo Dimension: 4100*30000mm Weight: 145t Tubes: Φ50.8*1.02*15000mm;2500 Tube Material: Seacure Application Field: Brine Waste Water Treatment
SINOPEC International
5.2 Non-ferrous Equipment - Titanium Heat Exchanger – Features:
Material: SA516-70/Ti Gr.2 Dimension: 2430*4250*20000mm Weight: 85 ton Application Field: PTA
SINOPEC International
5.3 Non-ferrous Equipment - Copper Alloy Heat Exchanger – Features
: Material: SB111 B10 Dimension: 4000*36*3802mm Weight: 150t Application Field: Ethylene Project
SINOPEC International
5.4 Non-ferrous Equipment - Si-Cu Alloy Heat Exchanger – Features
: Material: SB96 C65500 Dimension: 1420*10*6850mm Weight: 21 ton Application Field: Ethylene Project
SINOPEC International
5.5 Non-ferrous Equipment - Ni-Cu Alloy Heat Exchanger – Features:
Codes & Standards ： ASME Material: B3O Dimension ： φ1420*10*6850mm Weight: 21ton Application Field: LTC
SINOPEC International
5.6 Non-ferrous Equipment - Ni based Alloy Heat Exchanger – Features:
Material: N10276 Dimension ： φ3200*18*10244mm Weight: 53.3t
Application Field: Polyformaldehyde Project
SINOPEC International
5.7 Non-ferrous Equipment - Ni based Alloy Heat Exchanger – Features:
Material: C2000 Dimension ： φ1300*8*6582mm Weight: 10.68t
Application Field: PTA
SINOPEC International
5.8 Non-ferrous Equipment - Zirconium Alloy Heat Exchanger
– Features:
Material: Zirconium Dimension ： φ1600*10*6000mm Weight: 17.5t
Type: Zr U-bundle Heat Exchanger Application Field: Acetic Acid Project
SINOPEC International
5.9 Non-ferrous Equipment - PTA Ti-clad Dehydrate Tower
– Features:
Material: SA516-70/Ti Gr.2 Zirconium Dimension ： Φ5500*30000mm Weight: 230t Type: PTA Ti-clad Dehydrate Tower Required Hot Gas Cycling Test Application Field: PTA
SINOPEC International
5.10 Non-ferrous Equipment - Main Distillation Column – Features:
Material: SB-463 N08020 Dimension ： φ3985*34111mm Weight: 230t Type: Main Distillation Column Application Field: Acetic Acid Project
SINOPEC International
5.11 Non-ferrous Equipment - Preliminary Cleaning Column – Features:
Material: Incoloy825 Dimension: φ1300mm;L ＝ 11180mml Type: Preliminary Cleaning Column Application Field: Fluorine Chemical Project
SINOPEC International
5.12 Non-ferrous Equipment - Dehydration Reactor – Features:
PO/SM Unit Dehydration Reactor Material: SB-463-UNS N08020 Dimension ： φ4300*18*15000mm Weight: 103t Type: Dehydration Reactor Application Field: Ethylene Project
SINOPEC International
5.13 Non-ferrous Equipment - Reactor – Features
: Material: N08810 Dimension: Ф2800; Type: Dehydration Reactor Application Field: Polysilicon Project
SINOPEC International
5.14 Non-ferrous Equipment - Reactor – Features:
Material: Inconel 600 （ SB168 N06600) Application Field: Fluorine Chemical Project
SINOPEC International
5.15 Non-ferrous Equipment - Fluidized Bed Reactor – Features:
Material: Incoloy600 Dimension: φ3000*10800mm Application Field: Fluorine Chemical Project
SINOPEC International
5.16 Non-ferrous Equipment Zr-CS Claded Plate Reactor – Features:
Material: Ti & Ti Alloy Dimension: φ3500*6550mm Weight: 32t Type: Zr-CS Claded Plate Reactor Application Field: Chemical Project
SINOPEC International
5.17 Non-ferrous Equipment - Reactor – Features:
Type: Zr-CS Claded Plate Reactor Application Field: Chemical Project End
SINOPEC International
6 Compressor
centrifugal compressor, reciprocating compressor and pump to national key engineering fields such as petroleum, petrochemical, metallurgy, air separation, pharmacy, nuclear pump, textile, national defense, scientific research and etc.
1milliontons/year ethylene: 10milliontons/year refinery unit ： -- Catalyzed Reforming -- Aromatic Extraction -- Catalyzing and Cracking -- Delayed Coking -- Hydrogenation Cracking -- Hydrofining Fertilizer Unit ： 500000tons/year synthetic ammonia unit ： -- feed gas -- synthetic gas -- ammonia refrigerating -- air separation compressor 800000tons/year urea-carbon dioxide Large-size Air Separation Unit ： -- 60000 air separation Coal-Chemical Unit ： -- 1200000tons methanol -- feed gas -- Olefin -- Fertilizer
SINOPEC International
6.1 Centrifugal Compressor - MCL type
Flow range: 20-8500m3/min Type: MCL, 2MCL, 3MCL,DMCL horizontal split casing Material: Carbon steel/stainless steel Standard: API617/API670/API614 Max. operating pressures: 6Mpa Application: fertilizer, ethylene plants, refinery processes, city gas distribution , air separation, methane plants , nature gas plants etc.
Certificate: API
SINOPEC International
6.2 Centrifugal Compressor - BCL type
Flow range: 20-4500m3/min Type: BCL, 2BCL, 3BCL vertical split casing Material: stainless steel forging Standard: API617/API670/API614 Max. operating pressures: 70Mpa Application: fertilizer, ethylene plants, refinery processes, city gas distribution , air separation, methane plants , nature gas plants etc.
Certificate: API
SINOPEC International
6.3 Centrifugal Compressor - PCL type
Flow range: 17000-35000m3/min Type: PCL vertical split casing Material: stainless steel(forging) Standard: API617/API670/API614 Max. operating pressures: 8.5Mpa
Application: for natural gas pipelines and petrochemical processes.
Certificate: API
SINOPEC International
6.4 Centrifugal Compressor - SVK type
Flow range: 3500-165000m3/h Type: SVK8-SVK160, Packaged Integrally Geared Centrifugal compressor Material: carbon steel Standard: API672/API670 Max. operating pressures: 3Mpa Application: for air separation and instrument station etc Certificate: API
SINOPEC International
6.5 Axial Compressor - MA type
Flow range: 400-16000m3/min Type: MA60-MA160, axial compressor Material: carbon steel/stainless steel Standard: API617/API670/API614 Max. operating pressures: 0.35-0.65Mpa
Application: for large size blast furnace system and catalytic crack gas compression in large oil refinery etc.
Certificate: API
SINOPEC International
6.6 Centrifugal blower - D type
Flow range: 45-3500m3/min Type: D60-D1600 Material: carbon steel Standard: GB standard ∆P=10-300KPa Application: for small size blast furnace system and catalytic crack gas blower etc.
SINOPEC International
6.7 Centrifugal blower - GM type
Flow range: 50~1000 m3/min Type: GM25-GM75 Material: carbon steel Standard: GB standard Discharge Pressure=30 ～ 147KPa(G) Application: for small size water treatment plant
SINOPEC International
7 Intelligent Plant Solution
• • • • Distributed Control System (DCS) Advanced Process Control (APC) Ethernet for Plant Automation (EPA) Intelligent Instruments
SINOPEC International
7.1 Distributed Control System (DCS)
Brings powerful operational functions that are highly reliable for process control, friendly openness for third-party integration, and maximum efficiency in project commissioning whether it is small, medium, large, even extra-large. Has been applied in Petrochemical, Chemical, Oil & Gas, Power, Cement, Metal, Pulp & Paper and Food & Beverage industries.
CE certified EMC III class protection ISA-G3 standard anti-corrosion Dual redundant configuration High speed industrial Ethernet Support Modbus, PROFIBUS, FF, HART and EPA, etc.
Support on-line upgrading
SINOPEC International
7.2 Advanced Process Control (APC)
Gives full consideration of the complex nature of the real process control. APC-Suite helps realize optimal production and enhance the bottom line of your plant.
Software Package APC-Adcon: Multi-variable predictive robust control APC-PCalc: On-line process calculation APC-PFC: Predictive fction control APC-sensor: Soft sensor for measuring ESP-iSYS-A: Core real-time database
SINOPEC International
7.3 Ethernet for Plant Automation (EPA)
Developed the world's first EPA protocol chip accepted as IEC/PAS 62409. EPA is an advanced real-time Ethernet based field-bus for communication among field equipments.
Advanced real-time Ethernet-based field-bus IEC/PAS 62409
SINOPEC International
7.4 Intelligent Instruments
Developed the world’s first paperless recorder. Pioneers in this sector and brings the latest technologies to intelligent instruments for industrial use End
AR3100 Operational Recorder 16-channel universal isolated inputs 128MB built-in memory + external CF card 0.125s sampling period5.6 TFT color LCD R5000 Paperless Recorder 32-channel universal isolated inputs 128MB built-in memory + external CF card RS-232C/RS-485 interface 10.4 TFT color LCD RS-232C/RS-485 + Ethernet interface Process Calibrator Measuring temperature with thermocouple or RTD Ramping and stepping the output Storage and recall of 10 setups Auto flash terminals Isolator No high-integrity earth needed Full input/output/power supply isolation High performance components Standard DIN-rail mounting + Plug & Play terminals
SINOPEC International
8 Centrifugal Pump - Standard
： ISO, ANSI,API ,RCC-M,GB,ASME, EN,DIN …
- Capacity
： 1 ～ 20,000 (m3/h)
- Temperature
： -192 ℃ ～ +450 ℃
- Material
： CS, SS, DUPEX SS, SUPER DUPLEX SS
- Head
： ~ 3,500 (m)
- Pressure
： 35 (MPa )
SINOPEC International
8.1 EAP Series Petrochemical Process Pump (OH2) Product Summarize:
Design and manufacture in accordance with API610 standard with high reliability and performance, wide application of petrochemical industry, various structural transformations vary form different working conditions, as EAP9 typical structure, EAPK open-impeller structure, EPAD lightweight structure, EPAG high-pressure structure, EAPX low flow rate structure.
Design Parameter:
Capacity ： 2~2600m3/h Head ： ~300m T ： -80~+450 ℃ Pressure ： ~10.0Mpa
Applicable codes and standards:
API610 10th Edition
SINOPEC International
8.2 EDS Series Axially Split Double Suction Pump (BB1) Product Summarize :
Double suction impeller for one-stage structure; double suction impeller for the first stage and single suction impeller for second stage of dual-stage structure, hydraulic utilize advanced design means such as 3D modeling, DFD flow field analysis, etc based on excellent hydraulic model at home and abroad, wide scale of flow and head, high efficiency, good performance concerned anti cavitation, is new generation energy-efficient product.
Design Parameter:
Capacity ： 100~12000 m3/h Head ： ~440 m T ： -40~+220 ℃ Pressure ： ~5.0MPa
Applicable codes and standards
： API610 10th Edition
SINOPEC International
8.3 HDD Series Heavy Industry Chemical Pump (BB2) Product Summarize:
Apply to rigorous and heavy industry working conditions with advantages such as safe and reliable structure, stable operation, convenient maintenance, long service lift, etc.
Design Parameter:
Capacity ： 50~4500 m3/h Head ： ~700 m T ： -80~+450 ℃ Pressure ： ~15 MPa
Applicable codes and standards
： API610 10th Edition
SINOPEC International
8.4 SCSK Series Axially Split Multistage Pump (BB3) Product Summarize:
Casing of this serial is volute structure, centerline supporting, symmetrical arrangement of impellers, self balance of axial loads without complex balancing device such as balancing plate or balance drum; suction and discharge are arranged under the casing, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high pressure conditions.
Design Parameter:
Capacity ： 10~1500 m3/h Head ： ~2000 m T ： -40~+200 ℃ Pressure ： ~25 MPa
Applicable codes and standards
： API610 10th Edition
SINOPEC International
8.5 SCSG/DCSG Series High Pressure Multistage Pump(BB4/BB5) Product Summarize:
SCSG is single-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, balance axial loads by combined effect with drum-plate drum, effective control of “flash evaporation” when operation, realize axial force dynamic balance, bearings bear few axial loads.
DCSG is double-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, the core is ring-section which can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions.
Design Parameter: SCSG DCSG
Capacity ： 5~1000m3/h Capacity ： 5~1000m3/h Head ： ~2500 m Head ： ~3200 m T ： -80~+210 ℃ T ： -80~+450 ℃ Pressure ： ~27 MPa(max) Pressure ： ~35 MPa(max)
Applicable codes and standards
： API610 10th Edition
SINOPEC International
8.6 SCSZ/DCSZ Series Self Balanced Horizontal Multistage Pump(BB4/BB5) Product Summarize:
SCSZ is single-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, symmetrical arrangement of impellers, self balance of axial loads without complex balancing device, is applicable to transporting medium containing certain particles.
DCSZ is double-casing ring-section horizontal multistage pump, he external pressure parts use forgoing or casting, the core is ring-section which can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter: SCSZ DCSZ
Capacity ： 5~1000m3/h Capacity ： 5~1000m3/h Head ： ~2500 m Head ： ~3200 m T ： -80~+210 ℃ T ： -80~+450 ℃ Pressure ： ~27 MPa(max) Pressure ： ~35 MPa(max)
Applicable codes and standards:
API610 10th Edition
SINOPEC International
8.7 DCSK Series Axially Split Horizontal Multistage Pump(BB5) Product Summarize :
DCSK is double-casing structure, the external pressure parts use forgoing; the core is axially split, symmetrical arrangement of impellers, can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter :
Capacity ： 45~1440m3/h Head ： ~3200 m T ： -80~+450 ℃ Pressure ： ~35 MPa
Applicable codes and standards:
API610 10th Edition
SINOPEC International
8.8 LDB Series Vertical Multistage Pump (VS6) Product Summarize:
Design and manufacture in accordance with API610 0th Edition, thorough consideration and design concerned structure as supporting, cooling, maintenance, etc, can be equipped with kinds of auxiliary and monitoring system to achieve higher safety and reliability. Various structural transformations vary form different working conditions, as LDB-A multistage radial diffuser structure, LDB-B multistage blower structure, LDB-C one- and dual-stage large flow mixed-flow structure.
Design Parameter:
Head ： ~1000m T ： -80~+250 ℃ Pressure ： 15 Mpa
Applicable codes and standards
： API610 10th Edition
SINOPEC International