Transcript Yes

Pure IP PBX
KX-TDE600
MPR 2.00
Panasonic Communications CO.,LTD.
Pure IP-PBX KX-TDE Series

Product Line Up
TDE100/200
MPR 1.00
Version
TDE100/200
(MPR 1.0)
TDE100/200
(MPR 2.0)
TDE600
(MPR 2.0)
TDE100/200
MPR 2.00
Main Function
TDE600
MPR 2.00
- Peer to Peer Communication
- KX-NT300 Series IP-PT
- SIP Phone Compatible
- KX-TDA0177 (CSLC16)
- Improved Built-in SVM2
- KX-TDA0192/4 (ESVM)
- 8 Digits VM Integration
- Support T38 (ITU standard for sending FAX)
The same as TDE200 MPR 2.0/TDA600 MPR 5.0
New activation key.
KX-TDE600 System Highlights

 Build - up system (Flexible system: same as TDA600)
 Inherent TDA600 MPR 5.0 Features.
 Inherent TDE100 MPR 2.0 Features.
 Easy upgrade from TDA600 to TDE600
(Change EMPR card to IPCEMPR card)
 TDA600 Hardware products compatible with TDE600.
 TDE100 Activation keys compatible with TDE600.
 CA (NCP) feature is not supported.
 TDE600 does not support build-in SVM.
 New activation key for TDE600.
 Support KX-NT3xx Series
 Support KX-DT3xx Series
 PA: TDE600 supports PA 1.8 only. (Do not use PA 1.7 or
early version.)

KX-TDE600 System Highlights
NT300
TDE100/200 Series
Activation Key
NT136
VoIP/SIP
Router
TDA
0470
DLC
DHLC
IPCEMPR
DSP
MPR 2.0
PCMC
T7600
DT300
TDA600 MPR 5.0 Features
TDE100 MPR 2.0 Features
NT300
KX-TDE600 Shelf
KX-TDE600
Basic Shelf
Difference from TDA600
- MPR Card
- Front cabinet

KX-TDE620
Expansion Shelf
Difference from TDA620
- Front cabinet
KX-TDE600 Shelf (Build up)
The same concept as the TDA600
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE620
KX-TDE600
KX-TDE600
KX-TDE600
KX-TDE600
Entry
Medium-1
Medium-2
Full

KX-TDE600 Shelf
The same as the TDA600
4 x Physical Shelf
1 x Virtual Shelf

KX-TDE600 Virtual Slot
4 x Virtual Slot
Trunk
4 x Virtual Slot
Extension
The same as TDE100/200.
Total Max 8 x Virtual Slot

KX-TDE600 Max. Slot
TDE600
TDE600+
TDE600+
TDE620 x 1 TDE620 x 2
TDE600+
TDE620 x 3
System Max
18
29
40
51
Trunk Max
14
24
34
40
10
20
30
40
4
4
4
4
14
24
34
40
10
20
30
40
4
4
4
4
10
21
32
43
Physical Slot
Virtual Slot
Extension Max.
Physical Slot
Virtual Slot
Physical Slot

KX-TDE600 Terminals (Trunk)
TDE600
Trunk Max.
TDA600
640
640
32 (2 x SIP G/W-16)
-
0
-
32
-
32 (2 x V-G/W-16)
-
640 (40 Slots)
640 (40 Slots)
640
640 (40 Slots)
LCOT/BRI Traditional
640 (40 Slots)
640 (40 Slots)
PRI30/E1 Traditional
600 (20 Slots)
600 (20 Slots)
PRI23
Traditional
460 (20 Slots)
460 (20 Slots)
T1
Traditional
480 (20 Slots)
480 (20 Slots)
SIP G/W
Virtual (MPR)
Traditional
Max.
H.323
G/W
Virtual (MPR)
Traditional
Max.
KX-TDE600 Terminals (Trunk)
TDE600 +
TDE600 + TDE600 +
TDE620 x1 TDE620 x 2 TDE620 x 3
192 (*1)
352 (*2)
512 (*3)
640
32
32
32
32
32
32
32
32
32
32
32
32
160
320
480
640
160
320
480
640
160
320
480
640
150
300
450
600
115
230
345
460
120
240
360
480
160
320
480
640
TDE600
Trunk Max.
Virtual Max
SIP
IP-G/W
Traditional Max.
Analogue
BRI
PRI30/E1
PRI23
T1
IP-G/W

(*1) 192: 160 (BRI x 10) + 32 (Virtual)
(*2) 352: 320 (BRI x 20) + 32 (Virtual)
(*3) 512: 480 (BRI x 30) + 32 (Virtual)

KX-TDE600 Terminals (Extension)
TDE600
TDA600
1152
640: TDA0172 x 20
128: SIP (32 x 4 Slot)
384: TDA6178 x 16 Slot
64 (2 x V-IPExt-32)
1120
640 (40 Slot)
640 (40 Slot)
672
640
128 (4 x V-SIP-32)
-
0
-
Max.
128
-
PT
Traditional
640
640
SLT
Traditional
Extension Max
IP-PT
Virtual (MPR)
(MGCP) Traditional
Max.
SIP Ext. Virtual (MPR)
Traditional
PS (w/o MEC / w/ MEC)
-
960 (40 Slots x SLC24) 960 (40 Slots x SLC24)
512/512
256/512

KX-TDE600 Terminals (Extension)
TDE600
System Max. w/ DXDP
w/o DXDP
Virtual Max
SIP
IP-PT
Traditional Max. w/ DXDP
w/o DXDP
SLT Max
PT Max.
PT w/ DXDP
PT w/o DXDP
IP-PT
CS
PS (w/o MEC/ w/ MEC)
432
368
128
128
64
304
240
240
256
256
160
160
TDE600+
TDE600+
TDE600+
TDE620 x1 TDE620x 2 TDE620x 3
736
1008
1152
608
848
992
128
128
128
128
128
128
64
64
64
608
880
1120
480
720
960
480
720
960
512
640
640
512
640
640
320
480
640
320
480
640
32
64
96
128
512/512
512/512
512/512
512/512

KX-TDE600 Compatibility
- Compatibility with TDA600 option cards. (Trunk/System)
Card
TDE600 TDA600
Card
ELCOT-16 (TDA6181)
E1 (TDA0188)
CID/PAY8 (TDA0189)
CID (CO:TDA0193)
BRI-8 (TDA0288)
BRI-4 (TDA0284)
PRI (TDA0290)
IP-GW4 (TDA0480)
IP-GW4E (TDA0484)
IP-GW16E (TDA0490)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Bus-Master (TDA6110) Yes
Master-Sub (TDA6111) Yes
Yes
Yes
EMEC (TDA6105)
IPCMEC (TDE0105)
No
Yes
Yes
No
PSU-M (TDA0104)
PSU-L (TDA0103)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TDE600 TDA600
TDE600 does not support.
- LCOT-4 (TDA0183)
- LCOT-8 (TDA0180)

KX-TDE600 Compatibility
- Compatibility with TDA600 option cards. (Extension)
Card
TDE600 TDA600
Card
TDE600 TDA600
DHLC-8 (TDA0170)
DLC-8 (TDA0171)
DLC-16 (TDA0172)
SLC-8 (TDA0173)
CSLC-16 (TDA0177)
ESLC-16 (TDA6174)
EMSLC-16 (TDA6175)
ECMSLC-24 (TDA6178)
CS-I/F (TDA0144/0143)
Echo-16 (TDA6166)
CTI-LINK (TDA0410)
IP-Ext-16 (TDA0470)
Ext. CID (TDA0168)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No (*1)
Yes
Yes
Remote (TDA0196)
Yes
Yes
OPB-3 (TDA0190)
DPH-4 (TDA0161)
DPH-2 (TDA0162)
MSG (TDA0191)
E-SVM-2 (TDA0192)
E-SVM-4 (TDA0194)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*1: IPCEMPR Card has the CTI link port.
TDE600 does not support.
- SLC-16 (TDA0174)
- SLC-16 (TDA0175)
- ECHO-16 (TDA0166)

KX-TDE600 Compatibility
- Compatibility with TDE100/200 Activation keys.
Activation key
TDE600 TDE100
2-IP Trunk (NCS4102)
4-IP Trunk (NCS4104)
Yes
Yes
No (*1)
Yes
1-IP Soft-/IP-PT (NCS4201)
8-IP Soft-/IP-PT (NCS4208)
Yes
Yes
No (*1)
Yes
1-IP-PT (NCS4501)
8-IP-PT (NCS4508)
Yes
Yes
No (*1)
Yes
1-SIP Phone (NCS4701)
16-SIP Phone (NCS4716)
Yes
Yes
No (*1)
Yes
Feature Enhancement (NCS4910)
Feature Enhancement (NCS4950)
No
Yes
Yes
No
*1: TDE100/200 MPR 2.01 will support.
New activation keys.

KX-TDE600 Compatibility
- Compatibility with TDE100/200 options.
TDE600 TDE100
DSP-16 (TDE0110)
Yes
DSP-64 (TDE0111)
Yes
VoIP Encryption SD card (TDES01) No
VoIP Encryption SD card (TDES61) Yes
Yes
Yes
Yes
No

KX-TDE600 Compatibility
- Compatibility with NCP500/1000
TDE600 NCP
All Hardware of TDE600
All Hardware of NCP
Yes
No
No
Yes
All Activation products of TDE600
All Activation products of NCP
Yes
No
No
Yes
System Connection TDE600 & TDE620
A cable is packed in BUS-M
(TDA6110), BUS-M-Sub (TDA6111)
TDE620/TDA620
TDA620 Software should be 2.000 or later.
TDE620/TDA620
TDE620/TDA620
TDE620/TDA620
Cable
Cable
TDE600
TDE600
TDE600
TDA6111
(BUS-M-Sub)
Power unit
LPR Cards
TDA6110 (BUS-M)
TDA6111
(BUS-M-Sub)
TDA6110 (BUS-M)
Activation Key
Activation Key

- Issuing TDE600 activation key procedure is the same as
TDE100/200.
URL: https://eww.netreg.panasonic.co.jp/kms/
KX-TDE6101 IPCEMPR
KX-TDE0105 IPCMEC
KX-TDE600 IPCEMPR (TDE6101)
- KX-TDE6101: MPR card for TDA600.
(KX-TDE600 has KX-TDE6101)
-KX-TDE0105
Memory Expansion Card for IPCEMPR

Build-in Memory
Card

KX-TDE0105 (IPCMEC) Feature
TDE600 MPR 2.0
Items
4 Party Conference
With Broadcasting.
System Speed Dial
Station Speed Dial
100/Ext.
Hotel-SMDR for check
out.
TDA600 MPR 5.0
W/o
TDE0105
W/TDE0105
W/o MEC
W/MEC
Yes
Yes
No
Yes
1000/Tenant
1000/Tenant
x 32
1000/Tenant 1000/Tenant
x 32
x 32
Yes
Yes
No
Yes
4000 Calls
8000 Calls
No
8000 Calls
1000 Calls
4000 Calls
1000 Calls
4000 Calls
Quick Dial 8Digit,
4000 entries
Yes
Yes
Yes
Yes
Max. Number of PS
512
512
256
512
SDMR buffer
Procedure adding IPCMEC

The procedure detailed below is for your reference regarding the
addition of a IPCMEC card to a previously installed TDE600.
1. Save the current system data from the TDE to the SD card
2. Save the current system data from the SD card to your PC.
3. Power off the TDE and remove the preinstalled MEC card.
4. Install an IPCEMEC to the TDE.
Important
5. Power on with initial initializing steps.
6. Connect the PCMC and initialize the TDE.
7. Upload the system data to the TDE.
Note:
When the preinstalled memory card is removed, all recorded
SMDR data will be lost. Therefore, it is recommended to
output the SMDR data before removing the preinstalled
memory card.
TDE600 Software
TDE600 Software
TDE600 supports,
TDA600 MPR 5.0 Features.
- KX-TDA0158 (8ch-CS)
- KX-TDA6178 (24-SLT)
- 8 digits VM integration
- KX-TDA0192/4 (ESVM)
- Moving From SVM to DISA
- High Quality OGM Record to ESVM
TDE100 MPR 2.0 Feature.
- T.38

TDE600 Software
Modified/New Functions/Features

Modified/New Functions/Features
1 VM-Group Ext. number can be assigned as transfer re-call
destination.
2 Intercept function performs an extension which set call
forward to CO.
3
4
5
6
Auto recovery function for Busy-out (Analogue line).
Two CLIP on an Extension.
Check-OUT not ready mode (Hotel feature) is supported.
System error activates an external relay.
7 PRI CNIP with the name of extension.

Software Enhancement Plan
Transfer re-call to
VM-Group.
Intercept for CallFWD to CO.
Busy-out Auto
recovery function.
Two CLIP on an
Extension.
Check-OUT not
ready mode.
System error
activates an
external relay.
PRI CNIP
TDE600
NCP500
NCP1000
TDA30
2.0
1.0
(5.0)
(5.0)
(?)
(3.0)
2.0
1.0
(5.0)
(5.0)
(?)
(3.0)
2.0
1.0
(5.0)
(5.0)
(?)
(3.0)
2.0
(?)
(5.0)
(5.0)
(?)
(3.0)
2.0
1.0
(5.0)
(5.0)
(?)
(3.0)
2.0
1.0
(5.0)
(5.0)
(?)
(3.0)
2.0
1.0
N/A
(5.0)
(?)
(3.0)
( ) = Planed MPR version
TDA100
TDE100
TDA600
TDA200
TDE200
PCMC for TDE600
PCMC for TDE600
Please use U-PCMC Ver. 4

PCMC for TDE600
Now file

PCMC for TDE600
Connect

Upgrade TDA/TDE to TDE600

Upgrade to TDE600
Update from TDA600
The following items are necessary for the upgrade:
Model/Name
Description
KX-TDE6101 (IPCEMPR)
IP Convergence Main
Processing Card
The main processing card for controlling the Pure IPPBX (KX-TDE600). This card comes with an SD
Memory Card and 2 ferrite cores included.
KX-TDE0110 (DSP16)
16-Channel VoIP DSP Card
Digital signal processor (DSP) cards to be mounted
on the IPCMPR/IPCEMPR card.
Depending on the number and the type of IP trunks
and IP telephones you wish to use, either the DSP16
or DSP64 card is selected to be installed.
Note
The following activation keys are pre-installed:
4-Channel IP Trunk Activation Key: 1 for
DSP16; 4 for DSP64
8-Channel IP Proprietary Telephone Activation
Key: 1 for DSP16; 4 for DSP64
KX-TDE0111 (DSP64)
64-Channel VoIP DSP Card

Upgrade to TDE600
System data converter (By PCMC)
We can upgrade from TDA100/200/600/TDE100/200 to TDE600.
The origin PBX System data is only versions of TDA100/200
TDA600 (MPR 5.0xxx), TDE100/200 (MPR 2.0).
TDA600 MPR 5.0
TDE100/200 MPR 2.0
TDE600
System Data
PCMC
Data Converter

Upgrade to TDE600
Upgrade from TDA100/200 MPR x.x, TDA600 MPR 1.0,
TDE100/200 MPR 1.0 to TDE600.
TDA100/200 MPR x.x
TDA600 MPR 3.0
TDE100/200 MPR 1.0
Not Possible
PCMC
Data Converter
Data Convert
PCMC
Data Converter
TDA600 MPR 5.0
TDE100/200 MPR 2.0
TDE600
System Data
Upgrade to TDE600

PCMC data convert conditions
- SLC16 is converted to ESLC16 automatically.
- MSLC16 is converted to EMSLC16 automatically.
- LCOT16 is converted to ELCOT16 automatically.
The following card has to be removed and the card data has to be deleted
before system data convert.
- LCOT-4 (TDA0183)
- LCOT-8 (TDA0180)
- VoIP-4 (TDA0480)
- ECHO-16 (TDA0166)
- CTI Link card (TDA0410)
- Any card in Slot 11
TDE600 requirements
- Card configuration of TDE600 should be same as TDA/TDE.
- If the MEC card is installed in the TDA, IPCMEC should be install.
Upgrade to TDE600

Note:
The TDA SD memory card (TDA30/100/200: 32M, TDA600:64M) used in the
TDA cannot be used TDE600 (128M).
The SD memory card contains software for all the processes of the PBX and
all the customer data. It can be easily removed and taken away from the
PBX by a third party. Therefore, do not allow un-authorized access to
prevent data leakage. To prevent data leakage, render the SD Memory Card
physically unusable before disposal.
Upgrade to TDE600
Data Reset After Upgrade
• Incoming Call Log
• Outgoing Call Log (including Last Number Redial)
• Message Waiting
• SMDR
• Advice of Charge (AOC)/Pay Tone
• Hospitality guest billing data
• ICD Group monitor log for supervisor
• PBX date and time
• Timed Reminder
• LPR Timed Update time
• Daily test start time
• PT handset/headset volume
• PT SP-PHONE volume
• PT ring volume
• PT display contrast
• ICD Group login status

Upgrade to TDE600

• ICD Group login status (All extensions are set to Login by default.)
• ICD Group Ready/Not Ready status
(All extensions are set to Ready by default.)
• Live Call Screening (LCS) On/Off
• Hands-free Answerback status
• Absent Message status of extensions
(Absent Message data itself is not cleared.)
• FWD/DND status
(FWD destinations are not cleared.)
• Extension Lock/Remote Extension Lock
• Extension PIN Lock/Extension PIN Lock counter
• Verified Code PIN Lock/Verified Code PIN Lock counter
• Password Lock counter for Remote System Programming
• PBX Error Log
• Digital Trunk Error Report data
Upgrade Steps
Upgrade to TDE600

1- Back up the current system data.
2- Back up the current OGM files
3- Open the current system data by batch mode.
4- Delete the following card from the system data
- LCOT-4 (TDA0183)
- LCOT-8 (TDA0180)
This steps is operated by the
- VoIP-4 (TDA0480)
PCMC, but PCC recommends
- ECHO-16 (TDA0166)
this step by manually.
- CTI Link card (TDA0410)
- Any card in Slot 11
5- Save the system data.
Upgrade to TDE600

6- Convert the saved system data file for use with the TDE600.
6.1- Open U-PCMC 4.0.
6.2- Click
6.3- Select “PBX”
- TDA600 → TDE600
- TDE100/200 → TDE600
6.4- Select “By file”
6.5- Click “Next”
Upgrade to TDE600

6.6- Select source file (TDA600 MPR 5.0 or TDE100/200 MPR 2.0)
and click “OK”
6.7- Select destination file and click “OK”
The source file is automatically converted the TDE600 system
data.
7- Set up a new TDE600, or TDA600
[TDA600]
Remove the current MPR card from the TDA600 and Install the
IPCEMPR Card with either the DSP16/DSP64 Card mounted, in
the TDA600.
8- Slide the System Initialize Switch to the "SYSTEM INITIALIZE"
position.
9- Turn on the power to the PBX.
10- Connect the U-PCMC to the TDE600.
11- Quick set up.
12- Transfer the converted TDE600 data to the TDE by U-PCMC.

Upgrade to TDE600
13- Activate the user DGSYS from the PC.
Select “Utility” - ”System Reset” - “Reset
by the Command”.
13.1- Select
Important
13.2- Click “OK”

Upgrade to TDE600
[ Final settings ]
SD Card
- PGMPR 2.0
- DGSYS (2.0 User)
- DGSYS_SUB (2.0)
MPR.2.0
TDA Flash ROM
- PGMPR 2.0
- DGSYS (2.0 User)
Upgrade Steps
(TDA620 to TDE620)
Upgrade from TDA620 to TDE620 -1
1- Check the present BUS-S software version.
Should be 2.0xx

Upgrade from TDA620 to TDE620 -2

2- Transfer the BUS-S software (2.0xx) to the SD card.
pbuss_v02xx.bin
SD Card
- PGMPR 2.0
- DGSYS (2.0 User)
- PBUSS 2.0
MPR.2.0
Upgrade from TDA620 to TDE620 -3
3- Set the TDA620 to “OUS” mode.
Click to “OUS”

Upgrade from TDA620 to TDE620 -4
4- Transfer the BUS-S software (2.0xx) to the TDA620.
4-1 Select
4-2 Click
4-4 Click
4-3 Select

Upgrade from TDA620 to TDE620 -5

4-5 Click
4-6 Click
Present
Software
version
Upgrade from TDA620 to TDE620 -6

4-7 Click
4-8 Click
Click “OUS”
Upgrade from TDA620 to TDE620 -7
4-9 Click

Upgrade from TDA620 to TDE620 -8
5- Set the TDA620 to “INS” mode.
Click to “INS”

Upgrade from TDA620 to TDE620 -9
6- Check the present BUS-S software version.
Should be 2.0xx

Thank you very much !