Transcript KX-TDA200/100 System (Ver.1.0)

KX-TDE100/200
System
(Version 1.0)
Chapter 2
General Installation
Procedure
Panasonic Communications Co., Ltd.
Office Network Company
Edition 1.3 4th July, 2007
Confidential
1
Chapter 2
General Installation Procedure
1. Installation Preparation
2. Installation Procedure
3. PC Programming Tool
Confidential
2
1. Installation Preparation (1/4)
Step1. Collect the Customers’ Request
How many CO/Extensions does the customer need ?
IP-PT
10
Analog CO
20
Door phone
2
IP Soft Phone
10
DPT
5
Door Opener
0
SIP Extension
10
SLT
70
:
:
IP-GW
1
PS
5
:
:
ISDN PRI Line
0
CS
0
:
:
ISDN BRI Line
2
Voice Mail
2
:
:
Configuration tool
(This tool is currently under
development)
Confidential
3
1. Installation Preparation (2/4)
Step2. Which DSP do I require?
Configuration tool
(This tool is currently under
development)
Confidential
4
1. Installation Preparation (3/4)
Step3. Purchase Activation key Card from Sales Company
1) Order Activation Key Card
2) Get Activation key Card
Sales Company
3) Pay for Activation Key Card
Dealer
Confidential
5
1. Installation Preparation (4/4)
Step4. Get Activation Key from PCC Key Management System
1) Access PCC Key Management System to get Activation
Key File
Internet
PCC Key Management
System
2) Activation Key File
Dealer
Activation
Key File
Confidential
6
2. Installation Procedure (1/2)
1. Prepare TDE100/200, DSP16/64, other Optional Expansion cards, PT,SLT…
and Activation Key Files
2. Connect PC with TDE100/200 via LAN cable (using the lower of the 2 LAN
ports) or RS232C cable (Default PBX IP address is 192.168.0.101, port
number is 35300.)
3. Start Quick Setup using PCMC
4. Set DHCP Client Setting “Enable” or set IP address manually
Reboot
5. Start PCMC with new IPCMPR IP address
Confidential
SD Card must be 128mb
minimum – Smaller sized
cards will not be supported
7
2. Installation Procedure (2/2)
6. Install Activation Key file into SD card using PCMC (Utility Menu – File
Transfer PC to PBX)
KX-TDE100
Activation Key
File
KX-TDE200
7. Reboot or ‘Refresh Activation Key’ from PCMC (Utility Menu)
8. You can use IP-PT,SIP and IP-GW feature.
Confidential
All virtual card status must
be ‘OUS’ before using
‘Refresh Activation Key’
8
3. PC Programming Tool
Graphical user interface is the same as
TDA100/200/600 PC Programming Tool.
(Supported on Windows Vista)
Confidential
9
Chapter 2
General Installation Procedure
Thank you very much !
Confidential
10