Security Systems BU Communication Systems How to configure PC Controlled Camera Control 09.12.2004 PC Controlled Cam.
Download ReportTranscript Security Systems BU Communication Systems How to configure PC Controlled Camera Control 09.12.2004 PC Controlled Cam.
Security Systems BU Communication Systems
How to configure PC Controlled Camera Control
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 1
Security Systems BU Communication Systems This presentation is intended to guide the installer step by step through the camera control installation.
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 2
Security Systems BU Communication Systems PC controlled DCN system with Camera Control
•
•
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 3
Security Systems BU Communication Systems Direct Camera Control (PC Controlled)
Requirements : • One Dome Camera • CCU with TCB4 • One monitor • DCN software
V9.30 or higher!!!
• DCN Control PC = Temporary Installation PC • Software LBB3588/00
V2.0 or higher!!!
DCN 09.12.2004
PC Controlled Cam. Control ST/SEU-CO 4
Security Systems BU Communication Systems Step 1 Connect PC and Monitor to Dome Camera
DCN Control PC with
one
Comport RS232 AutoDome Camera 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 5
Security Systems BU Communication Systems Step 2 Install virtual keyboard software LTC 5138/00
Virtual Keyboard Program DCN Control PC with
one
Comport RS232 AutoDome Camera 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 6
Security Systems BU Communication Systems Step 3 Configure Virtual Keyboard
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 7
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 8
Security Systems BU Communication Systems Make sure you choose the right camera!!
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 9
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 10
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 11
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 12
Security Systems BU Communication Systems Step 4 Set Pre-Positions
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 13
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 14
Security Systems BU Communication Systems
Repeat Step 4 to set all Pre-Positions
Set the highest Pre-Position as overview 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 15
Security Systems BU Communication Systems Step 5 Check the Pre-Positions
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 16
Security Systems BU Communication Systems
If you were not successful setting up the pre positions please don’t continue with the next steps.
First make sure that the pre-positions are set.
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 17
Security Systems BU Communication Systems Step 6 Connect CCU to DCN Control PC and AutoDome
DCN Control PC RS232 DCN CCU
Port 1 Port 2
RS232 AutoDome Camera 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 18
Security Systems BU Communication Systems Step 7 CCU protocol and Serial Port settings
LBB3500/15 & LBB3500/35 Make sure that the ports of the CCU are set correct.
Port 1 Protocol = Full Baudrate = 115.2K
Port 2 Protocol = Camera Control Baudrate = 9.6K
Keep in mind !!
You have to change the baudrate of Port 2 to 9.6K
!!
DCN 09.12.2004
PC Controlled Cam. Control ST/SEU-CO 19
Security Systems BU Communication Systems Step 8 Start Camera Control Software LBB3588
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 20
Security Systems BU Communication Systems Keep in mind !!
An installation file must be open before camera installation is possible. 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 21
Security Systems BU Communication Systems Step 9 Combine seat numbers with camera pre positions
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 22
Security Systems BU Communication Systems Keep in mind !!
Make sure you choose the right camera!!
Camera nr = Camera Address
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 23
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 24
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control 5 DCN ST/SEU-CO 25
Security Systems BU Communication Systems
© Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 26
Security Systems BU Communication Systems With use of Allegiant Video Switcher (PC Controlled DCN)
Requirements : • Allegiant switcher • Video Switcher keyboard • Fixed and/or AutoDome cameras • Monitor(s) • DCN software
V8.00 or higher
• DCN Control PC with two Comports • Software LBB3588
V1.0 or higher
DCN 09.12.2004
PC Controlled Cam. Control ST/SEU-CO 27
Security Systems BU Communication Systems Step 1 Connect Camera(s),Monitor(s) and Keyboard to Video Switcher
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 29
Security Systems BU Communication Systems Step 2 Connect CCU to Allegiant Switcher and DCN Control PC
DCN CCU Allegiant Switcher DCN Control PC RS232
Port 1 Port 2
RS232 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 30
Security Systems BU Communication Systems Step 3 CCU protocol and Serial Port settings
LBB3500/15 & LBB3500/35 Make sure that the following settings are chosen: Port 1 Protocol = Full Baudrate = 115.2K
Port 2 Protocol = Camera Control Baudrate = 19.2K
Keep in mind !!
These are the default settings for the LBB3500/15 &LBB3500/35 DCN 09.12.2004
PC Controlled Cam. Control ST/SEU-CO 31
Security Systems BU Communication Systems Step 4 Start Camera Control Software LBB3588
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 32
Security Systems BU Communication Systems Keep in mind !!
An installation file must be open before camera installation is possible. 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 33
Security Systems BU Communication Systems Step 5 Set Pre-Positions using the Video Switcher Keyboard
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 34
Security Systems BU Communication Systems Step 6 Combine seat numbers with camera pre positions
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 35
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 36
Security Systems BU Communication Systems
09.12.2004
PC Controlled Cam. Control 5 DCN ST/SEU-CO 37
Security Systems BU Communication Systems
How to configure PC Controlled Camera Control
End of section
Robert Bosch GmbH All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner. 09.12.2004
PC Controlled Cam. Control DCN ST/SEU-CO 38