Transcript NONEL Systemet®

®
Teknisk
Informasjon
AnB System
®
Above and
below ground
NONEL
Systemet
DynoLine
NO.: DynoLine_no
Utgave:
the customer along with a delivery
acknowledgement. This type of
documentation allows the customer
to obtain
optimal
loading,
NONEL
DynoLine
brukes
for å thus
tenne opp NONEL-salver i sikker
minimizing
cost. The printouts also
avstand
fra sprengningsplassen.
NONEL DynoLine består av rosa
serve as valuable
documentation
in
standard
NONEL-slange,
og kan leveres
på ruller på 750 og 1500
cases where the blasting is being
meter.
carried out on behalf of a third
party.
bodies. In other words, they consist of a truck chassis with a loading
or transport unit mounted on top, which contains the necessary
amount of prepared Anolit. An AnB production unit, which mixes
the raw materials on site just prior to the loading, may also be
used. The explosives are loaded through a loading hose into the
boreholes by use of compressed air. Loading of the whole blast can
generally be done from ground level, or from the existing access to
the pallet.
For gjøre håndteringen av slangen enklere er det laget ledningsvinder.
For
å koble
NONEL
DynoLine
til f.eks en
NONEL
Starter,
koblingsblokk
The
operator
controls
the loading
with
the aid
of a radio-operated
eller
buntopptenner
brukes
en
kort
bit
koblingsslange
av myk
remote control system attached to the operator’s
belt.plast.
One
Supplying Anolit directly to the boreholes offers a number of
advantages:
• High degree of safety
• No need to store explosives
• Pre-programmed amount of loaded Anolit per hole
• Large loading capacity
• Efficient loading requiring minimal labour
• No leftover explosives
• Accurate documentation
• No handling of packaging
• Dewatering system
person can therefore carry out the entire loading operation. It is
also possible to pre-program the desired amount of explosive per
borehole. This is of course most useful in situations where there are
a large number of identical boreholes, and only one type of loading.
A PLC unit mounted on the loading unit records the amount in
and the number of each borehole. We would like to emphasis
that the AnB system’s products are delivered in accordance to the
customer’s specifications and wishes, and that it is the customer
who is responsible for the loading and blasting work. Orica Mining
Services wishes nevertheless to play an active supporting role.
Loading control – documentation
By using the AnB System, a cost-conscious customer will be utilizing
the most up-to-date loading control, which provides valuable and
necessary documentation.
Loading waterlogged holes
Waterlogged holes have previously presented difficulties for loading
with ANFO explosives. This problem has been (significantly) reduced
Tekniske spesifikasjoner
through AnB System’s dewatering technique. Each individual
The explosives are transported to a loading container mounted
Ledningslengder
750 og 1500
m can now dewatered immediately before loading. The water
borehole
on
load cells. This makes it possible to determine at any given
time
what amount has been loaded. Not only does this system
NONEL-slange
Standardclearing
3L (rosa)is done by inserting a plastic hose with a rubber bellow on
the end into the borehole. The hose and bellow is then subjected to
provide continuously updated information on the total amount
Ledningsvinde
pressure, and the water is pressed out of the hole through a return
delivered, but also information on the amount of explosives in
Totaleborehole.
ytre mål, inkl.
slangekutter
=hose.
220 xA240
x 375
mm unit attached to the operator’s belt operates
radio
control
each
A summary
report containing this informationLxBxH
is
the
dewatering
process.
All of our loading units have AnB system’s
printed
out
immediately
after
finished
loading,
and
is
delivered
to
Totalvekt
ca 2,75 kg
dewatering equipment.
o
Product / colorcode on
the bag
Density kg/dm3
o
Mellom -35 C og + 50 C
Brukstemperatur
Anolit
(standard)
Anolit Light
50%
Anolit Light
30%
Anolit Extra
Anolit A
Anolit Extra A
0,85
0,52
0,40
0,83
0,88
0,86
100
50
30
90
125
114
3,9
3,2
2,5
3,6
4,7
4,4
3,3
1,7
1,0
3,0
4,1
3,8
> 2400
2000
1300
> 2400
> 2700
> 2700
Gasvolume l/kg
970
795
650
Water resistance
Poor
Poor
Poor
Limited
Poor
Limited
Volume
strenght approx. %
Energy MJ/kg
Energy MJ/dm3
Detonation velocity m/s
approx. confined
Med hver rull DynoLine leveres en lengde
koblingsslange
985 hvor man kapper
895 passende biter
920brukt
som skjøtehylse.
DynoLine ledningsvind kan leveres for både 750 og
1500 meter snelle.
Approval and classification
Proper shipping name
Explosive, Blasting, Type B / Ammoniumnitrate
UN-number
0082 / 1942
Transport class
1.1 D / 5.1
The manufacturer reserves the right to modify products without prior notice. © Dyno Nobel Sweden AB
Dyno Nobel Sweden AB
Gyttorp, 713 82 Nora, Sweden
Phone: +46 587 85000 - email:[email protected]
www.oricaminingservices.com
AnB System® ®
NONEL
Systemet
Above and below ground
DynoLine
the customer along with a delivery
bodies. In other words, they consist of a truck chassis with a loading
acknowledgement. This type of
or transport unit mounted on top, which contains the necessary
documentation allows the customer
amount of prepared Anolit. An AnB production unit, which mixes
to obtain optimal loading, thus
the raw materials on site just prior to the loading, may also be
minimizing cost. The printouts also
used. The explosives are loaded through a loading hose into the
Bruk
serve as valuable documentation in
boreholes by use of compressed air. Loading of the whole blast can
1.generally
NONEL
dras
ut til første
blokk
(inngang)
i salven
til to
det sted cases
man skal
stå ved
where
the avfyring
blasting is being
beDynoLine
done from
ground
level, or
from
the existing
access
carried out on behalf of a third
the pallet.
party.og enden på NONEL
2. Endeforseglingen på NONEL-slangen på koblingsblokken skjæres bort,
directlyca to
Supplying
DynolineAnolit
renskjæres
20 the
cm. boreholes offers a number of
The operator controls the loading with the aid of a radio-operated
advantages:
control system
attached to the operator’s belt. One
High
degree
of
safety
•
3. NONEL DynoLine kobles til den første blokken (inngangen) i salven. Fraremote
den medfølgende
koblingsperson can therefore carry out the entire loading operation. It is
• No need to store explosives
slange kappes ca 4 cm av som skjøtehylse.
also possible to pre-program the desired amount of explosive per
• Pre-programmed amount of loaded Anolit per hole
borehole. This is of course most useful in situations where there are
• Large loading capacity
4. Slangeendene
fra loading
NONEL DynoLine-rullen
og fra
koblingsblokken trykkes inn
i skjøtehylsen
fraidentical
hver sin boreholes,
side så langtand
somonly
mulig,
1 cm.
a large
number of
onedog
typeminst
of loading.
• Efficient
requiring minimal
labour
A PLC unit mounted on the loading unit records the amount in
• No leftover explosives
5. Ved regn
eller fuktig
vær må man passe på at vann ikke trenger inn i koblingen!
and the number of each borehole. We would like to emphasis
• Accurate
documentation
that the AnB system’s products are delivered in accordance to the
• No handling of packaging
customer’s specifications and wishes, and that it is the customer
Dewatering
systemslangeskjøten.
6. Lag en•knute
som avlaster
who is responsible for the loading and blasting work. Orica Mining
wishes(DynoStart,
nevertheless
to play an
active
Loading
control
–
documentation
7. På avfyringsstedet kappes slangen fra NONEL DynoLine og kobles tilServices
tennapparat
DynoRem
eller
HN1)supporting
når alt errole.
klart og
By using the AnB System, a cost-conscious customer will be utilizing
salven skal skytes.
Loading waterlogged holes
the most up-to-date loading control, which provides valuable and
Waterlogged holes have previously presented difficulties for loading
necessary documentation.
8. Enden på NONEL-slangen på rullen forsegles med tape for å hindre atwith
vann/fuktighet
trengerThis
innproblem
under lagring.
ANFO explosives.
has been (significantly) reduced
through AnB System’s dewatering technique. Each individual
The explosives are transported to a loading container mounted
borehole can now dewatered immediately before loading. The water
on load cells. This makes it possible to determine at any given
clearing is done by inserting a plastic hose with a rubber bellow on
time what amount has been loaded. Not only does this system
the end into the borehole. The hose and bellow is then subjected to
provide continuously updated information on the total amount
pressure, and the water is pressed out of the hole through a return
delivered, but also information on the amount of explosives in
hose. A radio control unit attached to the operator’s belt operates
each borehole. A summary report containing this information is
Anbefalteout
lagringsbetingelser
Godkjennelse
og process.
klassifisering
the dewatering
All of our loading units have AnB system’s
printed
immediately after finished loading, and is delivered to
dewatering
equipment.
Lagringstid
2 år fra produksjonsdato.
Notified Body (godkjennende
0402 (SP, Sverige)
Produkter i åpnede pakker bør
institutt)
forbukes
VedLight
høy
Product / colorcode on
Anolit innen 3 mnd.
Anolit
Anolit
Light
Godkjennelsesnummer
158401
Anolit Extra
Anolit A
Anolit Extra A
fuktiget, 1 mnd.
the bag
(standard)
50%
30%
Produktbetegnelse / varenavn
DynoLine er ikke klassifisert som
Luftfuktighet
Tørt0,85
og luftig
Density kg/dm3
0,52
0,40
0,83
0,86
farlig0,88
gods
Volume
100
50
30
90
125
114
strenght approx. %
Energy MJ/kg
Energy MJ/dm3
3,9
3,2
2,5
3,6
4,7
4,4
3,3
1,7
1,0
3,0
4,1
3,8
> 2400
> 2700
> 2700
985
895
920
Limited
Poor
Limited
Detonation velocity m/s
2000
1300
Destruksjon
av NONEL-slanger > 2400
approx. confined
Spreng
ut det reaktive
og lever det
til en gjenvinningsstasjon
Gasvolume
l/kg materialet med DynoStart
970
795
650
Water resistance
Poor
Poor
Poor
Approval and classification
Proper shipping name
Explosive, Blasting, Type B / Ammoniumnitrate
UN-number
0082 / 1942
Transport class
1.1 D / 5.1
The manufacturer reserves the right to modify products without prior notice. © Dyno Nobel Sweden AB
Utgiver tar forbehold om trykkfeil, endringer i lover og forskrifter og eventuelle produktendringer © Orica Norway AS
Dyno Nobel
Sweden
Orica
Norway
AS AB
Gyttorp,
713
82
Nora, Sweden
Postboks 614, 3412
Lierstranda Besøksadresse: Røykenveien 18, 3400 Lier
Phone: +46
85000
email:[email protected]
Telefon:
32 587
22 91
00 - email:
[email protected]
www.oricaminingservices.com