Transcript IENG 471 Lecture 18: Project, Poster, & Presentation Req
IENG 465 – Final Design
Project Report & Presentation Requirements
4/25/2020 IENG 471 Facilities Planning
1
Second Term: Results Presentation
Presentation: Final Exam Period
20 min. presentation, 5 min. questions
Due via e-mail :
½ hour before
presentation Bring to class on a jump-drive Introduction
Team Members & Responsibilities
(~ 2 min)
Problem Statement & Constraints
Design Description & Project Results (~ 12 min)
Design Description
Functionality Results
Schedule Results
Budget Results
Recommendations & Conclusion Questions (remaining time) (~ 1 min)
Every member does a portion of presentation
4/25/2020 IENG 471 Facilities Planning
2
Final Design Project Report
Second Term Report:
(Due Friday of Finals Week, 12:00 Noon)
Cover Page Executive Summary Table of Contents Introduction
Problem Statement & Constraints
Methodology & Analysis Design Discussion & Project Results
Design Description
Functionality Results
Schedule Results
Budget Results
Recommendations, Conclusion & Acknowledgements References Appendices
Include copies of relevant engineering notebook pages from each member; communications; trial designs …
4/25/2020 IENG 471 Facilities Planning
3
Project Report Format
Cover Page
- With project title, and team members.
Table of Contents
- With page numbers.
Executive Summary
- One page or less. Brief description of problem(s), approach, main findings and recommendations.
Introduction
- Include an overview of the problem and operations. Briefly discuss the project thrust.
Problem Statement
- Concise description of problems that are addressed by this project. What is wrong? Who is being affected? Etc.
Methodology and Analysis
- This can have sub-sections. What was your approach and your design decisions and why did you make them? This section should summarize your concept design research review, with pertinent references cited from your reference section. Describe how you approached the problem - methods and procedures, assumptions, analysis techniques used, data sources. Why did you choose your approach? Teams are expected to make and justify their own assumptions in areas where information provided is unclear or insufficient.
4/25/2020 IENG 471 Facilities Planning
4
Project Report Format
Design Discussion
-
Present your design concept
to get more detailed information.
. Discuss the features and functions of your project and their sensitivity to use conditions. Discuss the tested functional results, project timing results, and the project budget outcomes. changes in assumptions. Some graphs and charts would be good in this section. Detailed printouts or calculations should be put in an appendix. Note, all pertinent information must appear within the body of the report. The reader should only need to refer to the appendices
Recommendations, Conclusions and Acknowledgments.
References
(Including oral conversations, listed as “Personal Communication”.) Note, citations should be made throughout your report where appropriate.
Appendices
– Drawings and Equipment Listing if required. Also summarize and document data collection (OPCs, BOMs, Value Added, …)
5
4/25/2020 IENG 471 Facilities Planning
Questions & Issues?
Finals Week:
Term scores will post online
Friday, Noon, grade book closes
Friday, PM reports graded
Grades & Budgets posted on website by Saturday, PM
Department will be keeping Final Reports
Can visit it, if you want – but keep a copy for yourself
4/25/2020 IENG 471 Facilities Planning
6