Transcript 欧州会議の目的、アウトプットに関して

NS1000 V3.0
- CLIP Modification Rev1.1 Aug 6, 2013
1
Table of Contents
1. Overview of this section
2. Function
3. How to program
2
Chapter 1
Overview
3
1. Overview
Solution
Automatic CLIP handling for productivity (smooth connectivity)
Features and Benefits >>
* Features New for V3
CLIP Modification for call over QSIG network
When a PBX receives a call via QSIG, the PBX modifies received CLIP for call back.
This feature is suite when system located other country connected by QSIG
8 CLIPs for each Extension
Each extension can have 8 CLIPs then automatically select suitable one for each carrier in making a call.
4
Chapter 2
Function
5
2-1. CLIP Modification for call over QSIG network
CLIP Modification (for a call via QSIG)
When a PBX receives a call via QSIG, this PBX modifies received CLIP
to enable to call back. This feature is suite when this QSIG connection
is international.
Country A
(+810)
PSTN /ITSP
Country B
(+820)
Subscriber in Country B
CLIP 820 9991234567
PSTN / ITSP
CLIP
999 1234567
New!
From V3
820 9991234567 (CLIP ID)
Edit
CLIP ID
Call Back
999 1234567
Edit
CLIP ID
820 9991234567 (CLIP ID)
PBX
For Oversea Call
Need “001”
EXT101
PBX
QSIG/E&M
QSIG/E&M
PBX
No CLIP Modification
at relay point
CLIP in Call Log
001 820 9991234567
EXT201
CLIP in Call Log
001 820 9991234567
6
2-2 8 CLIP-ID for each extension
Different CLIP for local call at each NS location
User can use different CLIP-ID for different carrier for different carrier
Carrier A
(CLIPA)
.
.
.
<Case2>
092-477-0002
PBX
Carrier H
(CLIPH)
<Case1>
050-111-0002
Each Extension
can have 8 CLIPs.
CLIP1:092-477-0002
….
CLIP8:050-111-0002
Ext1002
Condition
1) Each Extension/PS can have Max. 8 different CLIPs.
2) While ARS is not available, always CLIP-1 will be sent.
3) CLIP Table Number is assigned for each carrier in ARS
7
Chapter 3
Programing
8
CLIP Modification for call over QSIG network
9
3-1.CLIP Modification for call over QSIG network
CLIP Modification when PBX received a call (General)
CLIP Modification flow
Others,
SIP GW(TDE)
(Unknown)
SIP-GW/TDA50
(Unknown)
E1, T1, SIP
Analog CO
ISDN/IPGW
(Except Unknown)
BRI(CO),PRI(CO)
, QSIG
SIP GW
(International)
Delete +
Edit by total digits
Modify by number of digits
*1:setting in TDA5450/not
by System
*2:modificationfor
International call only
Edit by Carrier
Provided Information
Edit by Leading digits
1st digit = ‘+’ ?
remove ‘+’ then set as
“International”
otherwise set as “Unknown”
Edit by the logic programmed in
3.1.3 Caller ID Modification
(Length of digits)
Edit by the logic programmed in
3.1.3 Caller ID Modification
(CLIP)
Edit by the logic programmed in
3.1.3 Caller ID Modification
(Leading digits)
Modified CLIP to call back
10
3-1.CLIP Modification for call over QSIG network
Programming 1/4
Step1: specify modification table # for each TRG
Step2: define modification logic by total digits of CLIP ID
Step3: define modification logic by carrier provided information
Step4: define modification logic by leading digits
Programming at PBX#1
and final destination
PBX are done by same
way.
Step1: specify modification table # for each TRG
3.1.1. TRG Settings – Caller ID Modification Table
Set corresponding Table# for each TRG
11
3-1.CLIP Modification for call over QSIG network
Programming 2/4
Step1: specify modification table # for each TRG
Step2: define modification logic by total digits of CLIP ID
Step3: define modification logic by carrier provided information
Step4: define modification logic by leading digits
Step2: define modification logic by total digits of CLIP ID
3.1.3. Caller ID Modification – Length of Digits
Select Table#
If the provided dial digits match this table,
modify the digits otherwise does not modify
Note: 12 digits as International
8 digits as National call as default
CLIP
add
Additional digit
+
CLIP
Modified CLIP
12
3-1.CLIP Modification for call over QSIG network
Programming 3/4
Step1: specify modification table # for each TRG
Step2: define modification logic by total digits of CLIP ID
Step3: define modification logic by carrier provided information
Step4: define modification logic by leading digits
Step3: define modification logic by carrier provided information
3.1.3. Caller ID Modification – CLIP
Select Table#
Modified CLIP at step2
CLIP
remove
CLIP
add
If Carrier provides these info,
modify this table
Additional digit
+
CLIP
Modified CLIP
13
3-1.CLIP Modification for call over QSIG network
Programming 4/4
Step1: specify modification table # for each TRG
Step2: define modification logic by total digits of CLIP ID
Step3: define modification logic by carrier provided information
Step4: define modification logic by leading digits
Searching Leading digit to
find corresponding logic to
edit. (No match, no modify.)
Step4: define modification logic by leading digits
3.1.3. Caller ID Modification – Leading Digits
Select Table#
Modified CLIP at step3
CLIP
001
remove
Leading
digits
List
At here
It is necessary to add “011” here to
avoid international number become
“1011XXXXXXXXX”.
CLIP
add
1
Final CLIP ID
Additional digit
+
CLIP
14
3-1.CLIP Modification for call over QSIG network
Example
Sample1: Received CLIP with Long Distance digits, but PSTN does not need to dial.
CLIP from QSIG:
001 820 999 1234567
Leading digit Match “001820”
Remove 1st 6 digits
add no dial
Modified CLIP:
001 820 999 12345678
Sample2: Different prefix for international digits is required.
CLIP from QSIG:
001 8765 4321
Leading digit Match “001”
Remove 1st 3 digits
add “010”
Modified CLIP:
010 8765 4321
Note: Step2 and step3 set up, are not used in this example. Only step4 is used.
CIP Modification Table
001820
001
6
3
010
15
More than 2 CLIP for EXT
16
3-2. More than 2 CLIP for EXT
Programming 1/2 – set max 8 CLIPs for each extension
4.1.7 CLIP ID Table (4.2.5 for PS)
Set CLIP for each extension (CLIP1 – CLIP8)
Note: When modify CLIP1, then CLIP data on
Extension will be changed automatically
4.1.1 Extension Settings – [CLIP]
17
3-2. More than 2 CLIP for EXT
Programming 2/2 – set relation between Carrier and CLIP Table
8.5 Carrier – [Carrier]
Set CLIP Table No. (1-8)
ARS feature must be set
When 20th digit of Carrier Name is ‘X’, Itemized Code is sent out as CLIP.
(Higher priority than Clip table).
4.1.1 Extension Settings – [Option1]
18
END
19
Modification
20130730-01 6 NS1000 V3.0 CLIP Modification_Rev1.0_30 Jul2013.pptx
- 1st release
20130806-01 6 NS1000 V3.0 CLIP Modification_Rev1.1_06 Aug2013.pptx
- Delete 010 from P6 between PBX1 and PBX2
20