Transcript Yeastar - Aristel

LOGO
Enterprise Communication
Yeastar Technology Co., Ltd.
www.yeastar.com
Yeastar – IP PBX
Embedded Hybrid IP-PBX
MyPBX Technical Training
1
Introduction and basic settings
2
Advanced settings
3
Troubleshooting
Training – Level 1
Introduction of MyPBX
1.1Different modules that can be installed in MyPBX
1.2 Models of MyPBX and the difference between them
2
Basic settings
2.1 Warming up
2.2 Logical configuration steps in WEB GUI
2.2.1 Network & System settings
2.2.2 Extensions
2.2.3 Trunks
2.2.4 Outbound Calls
2.2.5 Inbound Calls
2.2.6 Other settings
2.2.7 Security
Training – Level 2
Part 1 Advanced settings for MyPBX
1. Control the outgoing calls
2. Usage of BLF
2
3. Distinctive ringtone
4. DNIS
5. SMS2Email and Email2SMS
6. Customize the prompt
7. Static route
8. SIP settings
9. Update system prompt
10. Call Back
Training – Level 2
Part 1 Advanced settings for MyPBX
11. OpenVPN
12. DDNS
2
13. VLAN
14. External Storage
15. Firmware Update
16. Customized configuration
17. Setup MyPBX reboot periodically
Training – Level 2
Part 2 Solutions
1. Register to MyPBX Server remotely
2. Phone provisioning
2.1 PnP mode 2
2.2 DHCP mode
3. Make call from outlook contacts
3.1 Configure TAPI connect to MyPBX
3.2 TAPI Driver Configuration
3.3 Test with Outlook
4. Connect two MyPBX together
4.1 intercommunication between two MyPBX (VOIP-Trunking)
4.2 Intercommunication-between-two-MyPBX(VoIP-Trunk)
Training – Level 2
Part 2 Solutions
5. Combine MyPBX with exist traditional PBX
6. Configure SIP Account in mobile phone
2 to Skype world
7. Extend MyPBX
7.1 Activate Skype for SIP on Skype
7.2 Configure MyPBX with Skype Calls
8. Setup call recording for MyPBX Enterprise
Training – Level 3
Background knowledge
1. Command line interface
1.1 How to login command line interface
1.2 Frequently used Linux commands
1.3 Frequently used
2 asterisk commands
1.4 How to get further logs
2. Analog telephony
2.1 To know the dial tone, ring back tone, busy tone, and caller ID signal
2.2 How to setup caller ID settings?
2.3 How to setup busy detection settings
3. BRI/PRI telephony
3.1 ISDN BRI/PRI brief introduction
3.2 ISDN layers, components
3.3 Configure BRI/PRI Settings on MyPBX
3.4 Pinout of BRI and PRI port
3.5 PRI debug
Training – Level 3
Background knowledge
4. SIP
4.1 SIP protocol brief introduction
4.2 SIP message
4.3 Headers of SIP messages
4.4 SIP Example
2 session
4.5 SIP Debug
5. Other debug methods
5.1 SMTP debug
5.2 Email SMS debug
6. How to recover system through program cable
6.1 Connect the program cable
6.2 Recover system for MyPBX SOHO using program cable
6.3 Recover system for MyPBX Standard using program cable
6.4 Recover system for MyPBX Enterprise using program cable
Training – Level 3
Troubleshooting – Issues and solutions
2