Transcript Introduction Guide for SATAID

Introduction Guide for SATAID
1
JAPAN METEOROLOGICAL AGENCY (JMA)
1. Download SATAID software
2
Click SATAID Application -> Download in the menu

http://www.wis-jma.go.jp/cms/sataid/app/download/

Click gmslpd.tar on the Download page and decompress
the file.
http://www.wis-jma.go.jp/sataid/GMSLPD/gmslpd.tar
1. Click this in
the menu
2. Click file link to
gmslpd.tar
3. Decompress
the file
2. Install SATAID software
3
 Double-click GSETUP.EXE that installs the
SATAID software
 Press Exec Button if the directory for SATAID
installation is acceptable
3. Press Yes to
make directory
2. Press Exec if the
directory is acceptable
1. Double-click
4. Press OK
This directory for SATAID installed
3. Start SATAID software
4
 SATAID is started by either of the following
 Double-click Gmslpw.exe on Windows desktop
 Start from the Windows start menu

start -> Programs -> GMS TC analysis-> TC analysis Gmslpd
2. Start from Windows menu
1. Double-click
or
4-1. Download SATAID data
5
 Access SATAID Service page at
http://www.wis-jma.go.jp/cms/sataid/
 Select data area from menu bar and click area name.
1. Select area and
click area name
from menu bar
4-2. Download SATAID data
6
 Each data kind is displayed in rows
 Satellite (IR1, IR2, IR4, WV, VIS)
 NWP
-- Observation data (SYNOP, METAR, SHIP, TEMP A,/B,
ASCAT)
 Arranged in order of time (Upper is the latest)
Latest
4-3. Download SATAID data
7
 File name is decided as follows:
 Satellite file name: XXYYYYMMDD.Zhhmm
XX=IR: IR1, I2: IR2, I4: IR4, WV: Water Vapor, VS: Visible
 NWP file name: XXYYMMDD.Zhh
XX=GS: GSM (Global Spectrum Model)
 Observation file name (SYNOP, SHIP, TEMP A/B): XX_YYYYMMDDhh.TXT
XX=SY: SYNOP, SH: SHIP, UA: TEMP A, UB: TEMP B
 Observation file name (METAR): METARYYYYMMDDhh.TXT
 Observation file name (ASCAT): WINXMMDD.TXT
Note: Each part represents parameter as follows:
XX: type of data; YYYY: year; MM: month; DD: day; hh: hour; mm: minute;
5-1. Display data by SATAID
8
 Select downloaded SATAID data which you want to
display by Ctrl key + Left Click
 Drag these files and drop on SATAID software
 Satellite image will be displayed
[Notice] To display the satellite image and the NWP products together
1. Select data
to display
3. Drop on
SATAID
2. Drag
these files
5-2. Display the NWP products
9
 Check the NWP box to show NWP data
 Press the GSM radio button
 Check level and elements
 Press the Exec button
1. Check the
NWP box
2. Press the GSM
radio button
4. Press the Exec
button
3. Check the box for
level and elements