Transcript 19-05-0043-00-0000-of-Curve-Fitting-to-BER-Data.ppt

November 2005
doc.: IEEE 802.19-05/0043r0
A Method of Curve Fitting to BER Data
Date: 2005-11-01
Authors:
Name
Company Address
Phone
E-mail
Steve
Shellhammer
Qualcomm
(858) 658-1874
[email protected]
5775 Morehouse Dr
San Diego, CA 92121
Notice: This document has been prepared to assist IEEE 802.19. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in
this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE
Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit
others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.19.
Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures <http:// ieee802.org/guides/bylaws/sb-bylaws.pdf>, including the statement
"IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents
essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the TAG of patent information that might be relevant to the standard is essential to
reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair
<[email protected]> as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being
developed within the IEEE 802.19 TAG. If you have questions, contact the IEEE Patent Committee Administrator at <[email protected]>.
Submission
Slide 1
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Presentation Outline
• Motivation
• Functional Curve Fitting
• Examples
– BPSK Data
– 802.15.4b PSSS in 915 MHz (US)
– 802.15.4b PSSS in 868 MHz (Europe)
• Word document IEEE 802.19-05/0042r0
Submission
Slide 2
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Motivation
• Estimating the packet error rate (PER) caused by
interference requires the BER or possibly the symbol
error rate (SER)
• Many times the BER curves are developed using
simulations since there is no analytic expression for the
BER
• Though it is possible to use the tabulated BER data in
estimating the PER it is often more convenient to utilize
a formula
• Also the PER calculations are likely to required BER
values outside the range of the original BER simulation
data, so somehow that BER data needs to be
extrapolated
Submission
Slide 3
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Functional Curve Fitting
• The approach suggested here is to select a
parameterized function and select the parameters of
the function to fit the BER simulation data
• The BER is a function of the signal to noise ratio (SNR)
f ( )
• The SNR is on a linear (not dB) scale
• Based on principals of probability, the function needs
to meet two boundary conditions
– At zero SNR the BER must be one-half
– At infinite SNR the BER must be zero
1
f ( 0) 
2
Submission
Lim f ( )  0
 
Slide 4
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Functional Curve Fitting
• Given the exponential nature of typical BER curves the
following functional format is proposed
f ( ) 
1
exp( g ( ))
2
• Where the function g is a polynomial with no constant
term
• An example of this is,
1
f ( )  exp( a  b 2 )
2
Submission
Slide 5
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Functional Curve Fitting
• This format guarantees that for zero SNR that the BER
is one-half
• If the coefficient b is negative then the BER tends to
zero as the SNR goes to infinity
• The simulation data typically consists of a sequence of
pair of the format,
{ i , pi }
• The SNR is assumed in this analysis to be in a linear
scale. If that is not the case the first step is to convert
the SNR from dB into a linear scale
Submission
Slide 6
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Functional Curve Fitting
• The BER formula says,
1
p  f ( )  exp( a  b 2 )
2
• Multiplying both sides by two and taking natural
logarithms gives,
Log (2 p)  a  b 2
Submission
Slide 7
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Functional Curve Fitting
• Applying the N BER data measurement pairs to this
equations gives the following N linear equations
Log (2 pi )  a i  b i
2
• The final step in the process is to find the least squares
estimate for the two unknowns (a and b) given these N
linear equations
Submission
Slide 8
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – BPSK Simulation
• The first example is
based on a simple
BPSK simulation
• The following
simulation data was
used
• The SNR was in dB
and needed to be
converted to a linear
scale
Submission
SNR
BER
0.0
0.080400000000
1.0
0.061800000000
2.0
0.035000000000
3.0
0.024600000000
4.0
0.013950000000
5.0
0.005650000000
6.0
0.002344444444
7.0
0.000762962963
8.0
0.000187962963
9.0
0.000033612040
10.0
0.000004100000
Slide 9
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – BPSK Simulation
• Results of least squared solution for coefficients a and b
1
f ( )  exp( 1.5136   0.036265  2 )
2
• Since the coefficient b is positive this function only
work for up to around 20 dB.
• After that point you need to set the BER to zero, which
is a very good approximation
Submission
Slide 10
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – BPSK Simulation
Submission
Slide 11
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – 802.15.4b PSSS
• Data for the 802.15.4b parallel sequence spread
spectrum (PSSS) was supplied by Andreas Wolf
• The presentation will show the results of the curve
fitting
• More detail is available in the Word document
Submission
Slide 12
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – 802.15.4b PSSS in 915 MHz
Submission
Slide 13
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – 802.15.4b PSSS in 868 MHz
Submission
Slide 14
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Example – 802.15.4b PSSS in 868 MHz
• One observation about the results of curve fitting to the
868 MHz data is that the fit is not that good a low SNR
• The reason for this is the simulation results show that
at low SNR the BER appears to be approaching a value
less than one-half. The reason for this is unknown
Submission
Slide 15
Steve Shellhammer, Qualcomm Inc.
November 2005
doc.: IEEE 802.19-05/0043r0
Conclusions
• A method of fitting a functional curve to a set of BER
simulation results was presented
• The functional format is exponential in nature as a
typical BER curve
• The format is such that the BER is guaranteed to be
one-half at low SNR
• As long at the highest order coefficient turns out
negative the BER tend to zero at high SNR
• If the highest order coefficient is positive then you need
to use this approximation up to some specified SNR
and set the BER to zero for higher SNR
• It might be possible to get a better fit if we fit functions
to sections of the BER data and end up with a piecewise
functional format
Submission
Slide 16
Steve Shellhammer, Qualcomm Inc.