Transcript SKIDGINES PUMPER CATS SOFT TRACKS AFTERMARKET EQUIPMENT CERTIFICATION ADDITIONAL FORM PUMP REQUIREMENTS The pump may be an auxiliary powered pump or a power take-off pump. All.

SKIDGINES
PUMPER CATS
SOFT TRACKS
AFTERMARKET EQUIPMENT
CERTIFICATION
ADDITIONAL FORM
PUMP REQUIREMENTS
The pump may be an auxiliary powered pump or a
power take-off pump.
All pumps must have a discharge pressure gauge.
If the pump is of the positive displacement type, a
bypass or pressure relief valve shall be provided.
The pump, as mounted, shall be capable of drafting
water from a source located 10 feet vertical distance
below the pump head through the required 20 feet
of suction hose.
The contractor may substitute a portable pump
capable of filling the unit if the mounted pump
cannot fill the tank.
TANK REQUIREMENTS
Tank shall be securely attached to the chassis in such a
way to withstand pitch and roll of the load during off
road operation of the unit without damaging the tank
or other chassis components.
All hardware must be rated to handle the load it is
securing.
No fiberglass or plastic tanks will be accepted unless
surrounded by steel to prevent puncture damage.
Tanks shall be equipped with partitions that reduce the
shifting of the water load.
MINIMUM STANDARDS FOR SKIDGINES
TYPE
1
2
3
4
TANK CAPACITY (GAL)
MINIMUM
MAXIMUM
1200
NONE
800
1199
400
799
200
399
FLYWHEEL HORSEPOWER
176+
75-175
100+
60-99
PUMP MIN. FLOW (GPM)
50
50
30
30
@ RATED PRESS. (PSI)
100
100
70
70
PUMP & ROLL
YES
YES
YES
YES
FOAM PROP. SYSTEM
OPT.
OPT.
OPT.
OPT.
WINCH OR GRAPPLE
NOT REQ.
NOT REQ.
OPT.
OPT.1
HOSE REEL (FEET)
1” - ¾” ID
150
150
150
150
1½” LINEN HOSE (FEET)
300
300
-
-
1” LINEN HOSE (FEET)
300
300
200
200
DISCHARGE OUTLET
1½” NH
1½” NH
1” NPSH
1” NPSH
1
1
1
1
PERSONNEL REQUIRED
DUMP VALVE
PRESSURE
GAUGE
HARD LINE
BACKUP
LIGHTS
DISCHARGE
OUTLET
DUMP
VALVE
Super Skidgines
MINIMUM STDS FOR PUMPER CATS
TYPE
1
2
3
500
NONE
325
499
200
324
FLYWHEEL HORSEPOWER
200
100-199
60-99
PUMP MIN. FLOW (GPM)
30
30
30
@ RATED PRESS. (PSI)
70
70
70
HOSE REEL (FEET)
1” - ¾” ID
150
150
150
1” LINEN HOSE (FEET)
200
200
200
DISCHARGE OUTLET
1” NPSH
1” NPSH
1” NPSH
YES
YES
YES
FOAM PROP. SYSTEM
OPTIONAL
OPTIONAL
OPTIONAL
WINCH OR GRAPPLE
OPTIONAL
OPTIONAL
OPTIONAL
1
1
1
TANK CAPACITY (GAL)
MINIMUM
MAXIMUM
PUMP & ROLL
PERSONNEL REQUIRED
HOSE REEL
PRESSURE
GAUGE
DISCHARGE
VALVE
DUMP VALVE
MINIMUM STDS FOR SOFTTRACKS
TYPE
1
TANK CAPACITY (GAL)
MINIMUM
MAXIMUM
FLYWHEEL HORSEPOWER
600
NONE
170+
PUMP MIN. FLOW (GPM)
30
@ RATED PRESSURE (PSI)
70
HOSE REEL (FEET)
1” - ¾”
150
1” LINEN HOSE (FEET)
200
DISCHARGE OUTLET
1” NPSH
PUMP & ROLL
YES
FOAM PROP. SYSTEM
OPTIONAL
WINCH OR GRAPPLE
OPTIONAL
PERSONNEL REQUIRED
1
PERSONAL PROTECTIVE
EQUIPMENT
Fire shelters
Nomex Shirt & Pants
Hardhat
Gloves
Boots
OTHER PERSONAL EQUIPMENT
REQUIRED
Eye Protection
Hearing Protection
Headlamp