Slide 1

Emergency Transfer Controls
ETC is your One-Stop-Shop for control upgrades on all
types of Automatic Transfer Schemes:

Automatic Transfer
Switches
(ATS)

Main-Main
(MM)

Main-Tie-Main
(MTM)

“Our cost, service, and support are unmatched in the industry”


Slide 2

Emergency Transfer Controls
We offer two industrial controllers and a full line of accessories
to handle your Transfer Scheme applications

ATS Display

PMCP

Load Add/Shed

Mini
ETC SCADA

Controllers

MTM Display

Accessories

Products are Designed and Manufactured in the United States


Slide 3

Emergency Transfer Controls
Our Products & Services are widely used throughout the USA and
Canada for critical applications:
●
●
●
●
●
●
●
●
●
●
●

Data Centers
Hospitals
Military Installations
State Facilities
Water Treatment Plants
Municipalities
Universities
Pharmaceutical Plants
Hotels
Correctional Facilities
Residential/Commercial Buildings


Slide 4

Emergency Transfer Controls
Advantages of using the PMCP Controller
●
●
●
●
●
●
●
●
●

NO software to write
Reduction in labor, wiring, parts, and engineering
Program operating settings within 60 Seconds
Programmable for ATS, Main-Main, or Main-Tie-Main Operation
Select for Open, Closed, Delayed, and Soft Load Transfer
Low and Medium voltage applications
A full line of accessories to meet your application requirements
A 2-Year Warranty on parts and labor
We provide 24/7 technical support

“The PMCP is the most versatile Transfer Scheme
Controller on the market”


Slide 5

Emergency Transfer Controls
Our Controllers are used to replace old and obsolete ATS
controls on all the major ATS Manufacturers

●
●
●
●
●

ASCO
Zenith
Kohler
Onan
Generac

●
●
●
●
●

Westinghouse
Cutler Hammer
Lake Shore
Thompson Technology
Russelectric

“Replacing the entire ATS is costly but upgrading the controls is not”


Slide 6

Emergency Transfer Controls
Interfacing the PMCP to an ATS and Main-Main


Slide 7

Emergency Transfer Controls
Interfacing the PMCP to a Main-Tie-Main Scheme


Slide 8

Emergency Transfer Controls
Upgrade any ATS with the PMCP Controller

Upgraded a 7000
Series ATS
with the PMCP
Controller
(University site)

Replaced Two Old Control
Panels With The PMCP
Controllers. No ATS
Shutdown was required.
(Facilities Management
Property)

A 400 AMP ATS
Upgrade
(Pharmaceutical
Plant)


Slide 9

Emergency Transfer Controls
The PMCP is used to upgrade the most complicated ATS

A Group 7 Closed Transition
Bypass (434) with Load Dump
(Major Medical Center)

The 434 Upgraded Using The
PMCP and The Accessory Panel:


Slide 10

Emergency Transfer Controls
The PMCP is used to upgrade very old ATSs

Replaced the old electro-mechanical
controls with the PMCP (the old
controls were left installed but
disabled).


Slide 11

Emergency Transfer Controls
The PMCP is used to upgrade new ATSs

Upgraded a new 7000
Series CTTS :
(Utility Site)

Front view showing
the PMCP and the
ATS Display Panel


Slide 12

Emergency Transfer Controls
The PMCP can easily be selected for Low and
Medium Voltage Switchgear applications

15KV Main-Main
(Data Centers in
Canada)

ATS Display Panel
mounted on door

4160v Main-Main
(Navy Base)


Slide 13

Emergency Transfer Controls
The PMCP has replaced PLC Designs in Switchgear
applications due to its simplicity and cost savings

480 vac Main-Tie-Main
208 vac Main-Tie-Main
(Air Force Base )

MTM Display Panel
Mounted on the Front
Door

480 vac MTTM
Custom design
(Data Center)


Slide 14

Emergency Transfer Controls
The PMCP is ideal for MM & MTM Applications

480 vac MTM
(Treatment Plant)

15KV MTM Closed
Transition
(Data Center)

2-15KV MTM
4-15KV MM
(State Facility)


Slide 15

Emergency Transfer Controls
Reduce overall labor and test time

MTM Status Control Panel:









Phone cable
interface to PMCP

Key Switch lockout
Monitor & Control a MTM scheme
View and Program Settings
Low or Medium Voltage metering
S1 and S2 Test Features
Select for OPEN or CLOSED Transfer
Manual or Automatic Operation
Mount Locally or Remotely

Pre-wired & tested
for MM & MTM
installations


Slide 16

Emergency Transfer Controls
Services we provide:
●

●
●
●
●

Upgrade, service, and installation of controls for ATSs, MainMain, and Main-Tie-Main Schemes
Engineering & Application support
SCADA Network upgrades and new installations
Upgrade Paralleling Switchgear Controls
Assessments and evaluations


Slide 17

Emergency Transfer Controls
You can contact us to discuss your Transfer Scheme
Application or upgrade project(s)

Emergency Transfer Controls
Three Bridges, NJ 08887
Office:
908-782-1794
Cell:
908-310-7741
Email:
joeragland@etccontrols
Website: www.etccontrols.com

Emergency Transfer Controls is a Minority Owned Business:
MBE