Transcript C-TEC Systemtechnik und Serviceleistung für die Werkstoffprüfung GmbH C-TEC Systemtechnik und Serviceleistung für die Werkstoffprüfung GmbH.

C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
The Origin of the company C-TEC:

Foundation in 1994

Commercial basis: development of „Pipeline Crawlers“

In 1995 the first C-TEC Crawler was sold to SGS
(after nearly one year of fulltime development)

Frequent enquiries of customers made C-TEC extend their
product range and range of services to react fast on the demands
of the international NDT market - now there are:

Pipeline Crawlers, Column Scanners, X-Ray Sets of any kind,
Ultrasonic Sets and Equipment, Protective Screen Measures (xray protection), Hardness Gauges, Field Gauges, Ultraviolet
Equipment, Tank Floor Testers (TFTs) etc.

Repair, Inspection and Calibration are carried out mainly in the
own workshop
Actually the whole range of NDT products is covered!
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Pipeline Crawlers
C-TEC
product range
& service
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Pipeline Crawlers
Pi p el i n e
Type C200:
Type C400:
Cr awle r
Pi p el i n e
Cra w l e r
C200

Pipeline diameter from 8 to 24 inches (200 to 600 mm)

Length of pipeline crawler 1700 mm (battery carriage, drive unit
and x-ray tube) - Connection: easy removable click-in sockets!

X-Ray tube: ICM SITE-X C1603 (50 - 160 kV, 1 - 3 mA)

Total weight of crawler 44 kg

Maximum gradient angle within pipeline 30°

Battery pack of crawler contains 4 gel batteries (maintenancefree) with an output of together about 48 V/12 Ah

2 Drive batteries in case that battery pack fails to drive crawler
out of the pipeline - output 24 V/4 Ah
Pi p el i n e
Cra w l e r
C400

Pipeline diameter from 16 to 64 inches (400 to 1600 mm)

Length of pipeline crawler 3000 mm (battery carriage, drive unit
and x-ray tube) - Connection: easy removable click-in sockets!

X-Ray tube:
or

Total weight of crawler 178 kg (with C3003) or 175 kg (with C2254)

Maximum gradient angle within pipeline 30°

Battery pack of crawler contains 10 gel batteries (maintenancefree) with an output of together about 120 V/18 Ah

2 Drive batteries in case that battery pack fails to drive crawler out
of the pipeline - output 24 V/18 Ah
ICM SITE-X C3003 (90 - 300 kV, 1 - 5 mA)
ICM SITE-X C2254 (70 - 225 kV, 1 - 4 mA)
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Pipeline Crawlers
X-Ray Units
C-TEC
product range
& service
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
X-Ray Units
ICM X-RAY UNITS
Sale
 ICM x-ray units with energy range of 160 - 300 kV/3 - 6 mA
 new and 2nd hand x-ray units of all other manufacturers
(e. g. Yxlon (Philips/Andex), Seifert, Gilardoni, Scanray, Toshiba etc.)
 C-TEC => your link to all manufacturers
Service
 Annual inspection including certificate, BGV A2 inspection
 Focal spot and energy measuring including certificate
 General repair (big stock of spare parts available)
Rental
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Pipeline Crawlers
X-Ray Units
C-TEC
product range
& service
Column Scanning
Devices
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Column Scanning
Devices
C-TEC „C-SCAN“ Column Scanning Device
Advantages of the „C-SCAN“
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Pipeline Crawlers
X-Ray Units
C-TEC
product range
& service
Column Scanning
Devices
Other Services
in NDT
C-TEC Systemtechnik und Serviceleistung
für die Werkstoffprüfung GmbH
Other Services
in NDT
How can we be of assistance to you?
C-TEC is covering (nearly) the whole range of products
for Non-Destructive Testing (NDT):
 Ultrasonic Equipment
 X-Ray Equipment
 Wallthickness Gauges
 Gamma Ray Equipment
 Magnetic Inspection
 UV Lamps
 Field Measuring Gauges
 Hardness Gauges
 Brightness Intesity Metres
 Densitometres
 Dose Metres
 Charger (of all kind)
 Signs/Plates
 Protective Screen Measures
 Adhesive Tape/Material
    and much more ....
How can we keep you informed?
C-TEC always delivers the proper documentation for your
files - no matter what kind of work was carried out:
Sample!
Sample!
Sample!
We are looking forward to welcoming you!
C-TEC Systemtechnik & Serviceleistung
für die Werkstoffprüfung GmbH
 Robert-Bosch-Straße 10
D-59199 Bönen, Germany

 Telefon: +49-23 83-9 10 41-0
 Telefax: +49-23 83-9 10 41-21
 Email: [email protected]
 URL: www.c-tec-ndt.com