Transcript Scheduling

Mobile Testing & Calibration Service
Certificate No 15281
National Association of Testing Authorities
Testing
Calibrations
Repairs
Inspections
Sales
Data Management
Scheduling
Why TEX Onsite
TEX Onsite is Australia's market leader in mobile testing and calibration services with a network of
technicians covering all states of Australia.
Our comprehensive scope allows us to test and/or calibrate a large range of equipment at your sites
with the aim for TEX Onsite to be the only call you need to make for all your needs.
We have a dedicated R&D team who are at your service to provide solutions when our scope needs to
be increased to fulfil your needs, plus an electronic repair laboratory to look after many items requiring
attention.
TEX Onsite is NATA Accredited (No 15281) to provide confidence, quality and stability across your
business wherever you are in Australia.
Our regional managers give you a single point of contact for each area and ensure that we understand
any local issues or requirements. This allows us to provide a flexible service to deliver the product
required to exceed your expectations
Mick Kirwan
Managing Director
Grant Mounsey
Chief Technical Officer
Jeremy White
Chief Operating Officer
Chris Kenihan
R&D Manager
Errol Dunn
National Business Development
Mgr
Dwayne Sparkes
Chief Financial Officer
Tristrum Pradun
IT Officer
Sarah Clarke
Company Accountant
David Li
IT Engineer
Chris Roussos
Technical Consultant
Kristy Cahill
Credit Controller
Paul Mycroft
Trainer/Auditor
Emma Pine
Administrator
Eddie Wust
Business Relationship Mgr
Jeremy Hurley
Chief Pilot
> the team
TEX Onsite organisational structure Australia
Jason McLean
TBA
Regional Manager West
Regional Manager South
Bruce Fisher
Electrical Tester
Ryan Burl
Electrical Tester
Shaun Porter
Electrical Tester
Craig Thompson
Darryl Briggs
Regional Manager Central
Regional Manager North
Jim Legg
Laboratory Manager
Keith Moss
Electrical Tester
Graeme Ward
Calibrator
Dermott Blackwell
Calibrator
Salim Helis
Electronics Repair Tech
Brett McCabe
Electrical Tester
Mackay Electrical Tester
Jordan Roddy
Pilot Technician
Paul Loughnan
Electrical Tester
Jesse Vince
Instrument Repair Tech
Peter Lucas
Electrical Tester
TBA
Electrical Tester
Steven King
Pilot Technician
Tim Duncan
Apprentice Calibrator
Jessica Traynor
Electrical Tester
Peter Graham
Electrical Tester
Mark Argent
Electrical Tester
Paul Drayton
Electrical Tester
Neville Lyons
Electrical Tester
Chris Forward
Electrical Tester
Kris Capewell
Pilot Technician
Chris Kerr
Calibrator
Wayne Wicks
Electrical Tester
Steve Penfold
Pilot Technician
Peter Leahey
Electrical Tester
Gavin Rae
Pilot Technician
Terry Toner
Neil Taylor
Pilot Technician
Areas of expertise:
Mobile electrical testing up to 200KV AC on site for: ( Insulating Gloves/Sleeves/Mats,
Hard Covers, Line Sticks, Live Line Equipment, EWP Units & Liners, Oil, Indication Meters,
Probe Testers, Portable Earths )
Mobile Instrument Calibration: (most hand held electrical instruments, oscilloscopes, high
pot and VLF sets, vernier, micrometer, temperature control )
Pressure Calibration: Pressure – Vacuum and pressure ranging up to 10,000psi (700bar),
Accuracy up to 0.01%
Torque Calibration: Torque - calibration available up to 1500Nm (Newton metres) which
equals about 1100 lbft (Pound Foot)
Inspections: harness, line belts, pole strap, ladders
Portable Appliance Testing: Testing and Tagging of portable electrical appliances used in the
workplace. These requirements are based around Australian Standards and are legislated so
that all workplaces must comply.
Dimensional Measurement Equipment Calibration: Flatness 0.15µm, Parallelism 0.4µm,
Grade AA gage blocks, Dial gages 15mm (0.600") Range, 0.001mm (0.00005") Resolution,
Lifting Equipment Inspection: Webbing Slings, Chains, Wire Rope Slings, Hooks and
Shackles, Hand Operated Chain Blocks
Autoclave Validation: Temperature: ±0.05 °C, Pressure: ±0.25% full scale, Up to +150 °C
Areas of expertise:
Power System Protection Maintenance - Through a unique and effectual alliance with
Protection System experts Electre Consulting, TEX Onsite provides a rapid response
Protection Relay Maintenance Service to the site – anywhere in Australia.
Generation & Transmission System Protection Design Service
The Electre / TEX Onsite alliance allows for rapid response power system protection design
expertise delivered Australia wide, ensuring protection installations are continually monitored
and are always up to date.
Infrared & Thermal Imaging Calibration: Stability, ± 0.05 °C at 35 °C, ± 0.20 °C at 200 °C, ±
0.40 °C at 500 °C, Accuracy for 8 µm to 14 µm emissivity set between 0.9 and 1.0, ± 0.35 °C
at 35 °C, ± 0.50 °C at 100 °C, ± 0.70 °C at 200 °C, ± 1.20 °C at 350 °C, ± 1.60 °C at 500 °C,
Emissivity 0.95, Uniformity of approximately 0.1°C
Temperature Calibration: Accuracy ± 0.03°C up to 650°C, Stability ± 0.06°C up to 650°C,
Uniformity ± 0.06°C up to 650°C
Repairs : ( rubber products, portable earths, fibreglass sticks and Electronic instrument fault
finding and repair )
Sound Level Meter Calibration: Frequency 1000 Hz ± 2 %.Sound Pressure Level94 dB ±
0.75 dB. 114 dB ± 0.9 dB. Total harmonic distortion94 dB range ± 2 %. 94 dB range ± 2 %.
Suitable Microphone Type0.5 inch or 1 inch microphone.
Chemical Testing: Conductivity, pH, Relative Humidity, Total Dissolved Solids (TDS), Redox
Areas of expertise:
Thickness Gauges: Ultrasonic thickness gauges from 1.5 to 20mm (accuracy of 4µm). Paint
thickness gauges from 80µm to 400µm (accuracy of 0.25µm)
Surveying Equipment Laser Levels, Dumpy Levels, Engineers Levels, Clinometers and
Theodolites
Weight s and Measures Calibration 0.02% accuracy for on-site scales up to 200kg, 0.005%
accuracy for scales up to 65kg, 0.005% accuracy weights up to 65kg (Non-commercial
applications only)
Water Meters – Verification and Validation of flow meters to ATS4747 including in-situ
calibration. 1% Basic accuracy
In-situ Flow meter calibration – Ultrasonic in-situ calibration of liquid flow meters including
closed loop system for mine site fuel farms and fuel tender trucks
Ultrasonic Pipe Wall Thickness Surveys – Measuring range 200mm. Accuracy 0.1mm.
Linearity 0.1mm
In-situ process control instrument calibration – shutdown and maintenance mode
instrument and scada system calibration
Engineering Consultancy – Providing solutions to your process and measurement problems
HV Installation Testing – Ductor testing of busbar connections, isolator and circuit breaker
contacts; Hipot testing between phases and phase to earth
Value Add Services
Data Management
All inspected equipment is recorded into a live database
Test results are recorded (pass or fail)
Creating a history of your assets.
Traceable / Track able - auditable
Scheduling
Scheduling service to close the circle ensuring your equipment remains within test and you
compliant.
We contact you (company nominated person) to schedule your next testing
Flexible Service
Flexible testing service designed to meet the client’s needs
Eliminating your equipment downtime.
Providing you the client with a more productive and efficient resource
remain
Factory Testing
Scheduled testing can be done at equipment facilities
Testing is subject to resource & equipment availability.
Delivery timeframes maybe greater than scheduled testing on site
Online Store
To find out more about our range of products call me or visit our website www.texonsite.com.au and log on
to our “Online Store”
Resource & Equipment
Administration Office Lilydale Victoria
Locations - Melbourne, Brisbane, Perth, Mackay, Toowoomba, Townsville, Gladstone, Sydney, Darwin
30 Mobile Test vans
4 Twin-Engine aircraft
2 Hubble 100kV mobile test sets
15 Hi Pot 120kV mobile test sets
1 Phenix 130kV mobile test set
2 Hi Pot 200kV mobile Test sets
3 Megger Portable Oil test set
9 Argenton Portable Earth Test sets
12 Time Electronics 5051+ Calibration Systems
12 Time Electronics Ins-Cal 5069 Insulation Tester
Calibration System
11 Time Electronics Ductor Cal- Ductor Tester and micro-Ohm
metre Calibration Systems
TEX Onsite first Air-mobile Test
and Calibration unit.
This aircraft will complement our
existing mobile fleet, providing a fast
and efficient means of transport, thus
reducing long travel hours and driver
fatigue.
This aircraft will be equipped with the
ability to perform both HV Testing and
Instrument calibrations
It will provide an efficient and affective
means of servicing remote clients.
Clients using this service will need to
assist TEX Onsite technical staff in
transporting the testing equipment to
a suitable testing area.
Twin engine Beech craft - Baron
Summary
We have a fast effective mobile testing and calibration fleet designed to meet your needs.
Our main locations are Melbourne, Brisbane, Perth, Townsville, Gladstone, Sydney, Mackay, Darwin
Our staff will visit your location to advise and discuss your testing requirements, ensuring your equipment is appropriately
tested or calibrated and is compliant against relevant state regulatory codes.
We also have established TEX Onsite companies in New Zealand and USA
Australia Head Office
Postal Address
TEX Onsite Pty Ltd
Factory 10/ 64-86
Beresford Rd
Lilydale Victoria 3140
Contact
Tel: 1300 785 935
+61 (03) 9735 0508
Fax: +61 (03) 97350216