Transcript Perel Latvia SIA

Sveicināti!
Jauni produkti
2008
Perel Latvia SIA
Metrel
Sprieguma & nepārtrauktības
testeri
•LED modelis
•LCD modelis
•CAT IV 1000V
•3 gadu garantija
•RCD nostrādes tests
•IP65
MD1000
Perel Latvia SIA
MD1100
Tehniskā specifikācija
MD 1000-LED
MD 1100-LCD
Pamata raksturojums
Sprieguma tests - 12 V ÷ 690 V
Automātiska AC/DC pazīšana
Nepārtrauktības tests līdz 500
kΩ
Fāzes & griežlauka tests
RCD nostrādes tests
Diožu tests
Gaismas diožu displejs
Pamata raksturojums
Sprieguma tests - 12 V ÷ 690 V
Automātiska AC/DC pazīšana
Nepārtrauktības tests līdz 2000
Ω
Fāzes & griežlauka tests
RCD nostrādes tests
Diožu tests
Perel Latvia SIA
•
Auto Power Off
•
Data Hold
•
Apgaismojams šķidro kristālu
displejs
Metrel
MI-3101 EurotestAT
Fast measurement using AUTO
SEGUENCY
Simple to use
Standardized test report
Automatically detects possible
hazardous measurement
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
AUTO SEQUENCE ® - Enhanced test performance, patented by Metrel – one programmable
procedure with several Single Tests in sequence.
•Clearly visible information on big 320x240 dots matrix display with backlight.
•Locator function enables tracing fuses, lines and faults. (like MI-2093 cable tester)
•Date and time, related to each saved result.
•On-line voltage monitor shows voltage levels for L-L, L-N and L-PE during the measurement.
•Fast, reliable and accurate Loop L-PE resistance measurement without RCD tripping.
•Built-in Fuse characteristics database for quick evaluation of measuring results at LINE/LOOP impedance testing.
•Field-proven Earth resistance measuring method which eliminates stray earth currents during the measurement.
•TN/TT/IT Earthing System support.
•Multi-functional schuko Plug commander for faster execution of a measuring sequence.
•Built-in internal memory with professionally organized structure with up to 2000 locations.
•QUERTY keypad for creating names in installation's structure.
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
Help menu with connection diagrams and short
descriptions for all available functions
Continuity test uses N and PE wires for
measurements to enable N-PE
Continuity verification on live installation through
schuko-plug.
This means Auto sequence needn’t be interrupted to
switch mains off.
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
Automatic measurement of installation resistance between
all three wire pairs: L-N, L-PE and N-PE up to 1 Gohm.
Test voltages: 50V, 100V, 250V, 500V or 1000V
Two-point and three-point earth resistance measurement.
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
Complete RCD analysis also in automatic 6-steps RCD
By providing various test current 10mA  1000mA.
Multipliers ½ I to 5*I, Current polarities and shapes,
(sin AC, pulsed A, general G and selective S)
Precise measurements of L-N and L-L line
impedance in wide voltage range. 30V 440V
Measures also in RCD protected line with
RCD trip lock function.
Extensive fuse characteristics database with
built-in limit values.
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
Qwerty keypad on screen !!
Create test report quickly !!
Both USB and RS232
Insert our personal remarks
simply drop & drag
interface
Perel Latvia SIA
Metrel
MI-3101 EurotestAT
Standard set
Instrument, carrying bag + belt, test tips 3pcs,
alligator clips, plug commander, USB cable, test
cable, power adapter + NiMH cells, instruction
manual long + short, conformity declaration,
production verification data, PC SW Euro link-lite.
Optional Accessories
Tip commander, earth set 20m, fast cells, charger for
12 cell, probe lead, earth set 50m, three phase cable,
three phase adapter, selective probe, receiver, PC
SW Euro link pro
Perel Latvia SIA
Multi M700 & M730
Noplūdes strāvu mērītājs
FEATURES
● High Sensitive for Low Range
Leakage Current
● Suitable for Measurement of
4-20mA DC Controlled Circuit
● DC mV Analog Signal Output
● Lowest Influence from
Magnetization
& Terrestrial Magnetism
● Wide Measuring Ranges - up to
DC 1000mA & AC 10A
M700 & M730
M700
Perel Latvia SIA
M730
Multi M700 & M730
Specifikācija
•Measuring function : AC/DC current
•Safety Standard : IEC1010-032 CATⅡ 600V or CATⅢ 300V
•Measuring method : Clamp CT M730 (Slid/Hook Type M700)
•Jaw opening capability : 5mmφ M700 ; 30 mmφM730
•Measuring ranges : DC 100mA/1000mA,
AC 100mA/1000mA/10A (45Hz～65Hz)
•Display : Max. 2000 count on LCD
•Zero adjustment : For DC current range, by "0 ADJ" switch
•Signal Output : DC 100mV full scale to each range
•Circuit voltage : less than AC/DC 500V
•Auto power off : Approx. 10 minutes
•Consumption Current : Approx. 9mA (approx. 200h for continuous use)
•Accessories : Soft Case, Batteries, Instruction Manual
Perel Latvia SIA
Paldies!
Perel Latvia SIA