Transcript Tek-CARE ® NC300 II - TekTone Sound & Signal Mfg., Inc.

Tek-CARE® NC300 II
Microprocessor Nurse Call System
In-Service Training
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd. • Franklin, NC 28734
Phone: (800) 327-8466 or (828) 524-9967 • Sales: option 2 • Tech Support: option 3
Email: [email protected] • Website: www.tektone.com
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Table of Contents
Click on a topic to view that slide
Introduction
The Call Display
Master Station
Dome Lights
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
NC305LCD Master Station Operation
Answering a Call
Calling Another Master Station
Bed Station Priority
Hot Keys—Call Priority
Hot Keys—Privacy
Hot Keys—Capture
Hot Keys—Alpha
Hot Keys—Tone On
Hot Keys—Nurse, Aide
Hot Keys—STAT
Hot Keys—Page
Hot Keys—View
Hot Keys—Follow
Configuration Options
System Configuration Options
Radio Pocket Paging
Patient Call Stations
Call Cords
Peripheral Devices
NC305LCD Programming
Custom Call Station Labels
Master Call Response
Station Add/Delete Function
Call Response Overtimes
Pager Zone & Call Type Assignments
Assign Pagers to Rooms
Password Protection
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
At TekTone®, our 30 years of listening to health care professionals
has given us the insight to develop a nurse call system with all the
features you want. We’ve developed our Tek-CARE® NC300 II nurse
call system to enhance the service you provide to your patients. At
the same time, you’ll find it’s the easiest and most efficient patient
call system you can use.
This presentation is designed to familiarize you with the Tek-CARE®
NC300 II nurse call system. For complete user instructions, please
refer to the Operation, Installation and Service manual (part number
IL715).
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
The Call Display
Tek-CARE® NC300 II
In-Service Training
The NC305LCD Master Station employs
an integrated backlit color LCD VGA
Display with 10.4” viewing area—large
enough to clearly display a great deal of
information at once.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
The Call Display (continued)
Tek-CARE® NC300 II
In-Service Training
Current calls are displayed in color—with the highest priority calls
listed first—to quickly distinguish call urgency. Call types, such as
ROUTINE, BATH, and EMERGENCY, are also spelled out. Room
number, call station label, call type and call time are displayed on
the left side of the screen.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
The Call Display (continued)
High priority STAT calls are listed on the right side of the screen.
Locations of nurses and aides, as well as requests for nurse or aide
presence, are also displayed on the right.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
Master Station
The water-resistant master station has quick-key access to the
most-used functions. This compact unit with integral handset
makes it incredibly easy to respond to calls.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
Dome Lights
Tek-CARE® NC300 II
In-Service Training
Dome lights provide indication of call origin, priority and staff
presence. Knowing the meaning of each dome light signal will allow
you to respond correctly and quickly to a call. The next few slides
show the dome light indicators for various call types.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
White Lens
The white lens indicates low to high priority calls, depending on flash
rate.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
Steady on =
Routine, personal attention, duty or staff
Medium flash =
Emergency, bath, priority, bed out or cord out
Alternating red &
white fast flash =
Code call
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
Red Lens
The red lens is associated with higher priority calls
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Slow flash =
Monitor
Fast flash =
Fire (supplementary signal only—if used)
Alternating red &
white fast flash =
Code call
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Introduction
Green & Amber Lenses
The green lens is associated with nurses, while the amber lens is
associated with aides.
Steady On =
Nurse or aide present (when used with
presence stations)
Slow Flash =
Request for nurse or aide (issued at the
master station)
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
Alternating green &
amber fast flash =
STAT
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
This section covers many common
functions of the nurse call system, with an
emphasis on the NC305LCD master
station. These functions include answering
calls, setting bed station priority and
privacy, paging staff and dispatching staff.
It’s easy to use and configure your master
station to provide the best service and
response for your patients.
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Answering a Call—Method One:
Tek-CARE® NC300 II
In-Service Training
Table of Contents
With a call on the screen, press the TALK button and release to
listen, or pick up the handset and begin speaking—you control the
conversation. This method connects you to the highest priority and
oldest call on the system (listed at the top of the display screen).
Notice that the call line on the display screen is highlighted when
connected.
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Answering a Call—Method Two:
Tek-CARE® NC300 II
In-Service Training
Enter the room and bed number via the keypad to manually call a
room or to answer a call out of sequence. A dialog box appears after
the first number key is pressed. Press the TALK button and release
to listen, or pick up the handset and begin speaking. Notice that the
call line on the display screen is highlighted when connected.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Calling Another Master Station
Tek-CARE® NC300 II
In-Service Training
Enter the master number (1–8) and
then pick up the handset or press the
TALK button to speak and release to
listen.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Bed Station Priority
Three call priorities are available at every bed station. They are
programmed at the master station using the PRIORITY key.
Tek-CARE® NC300 II
In-Service Training
Routine:
(default) White dome light steady on; slow tone at master
station—call can be reset at the master station after
voice communication is established.
Pers. Attn.:
White dome light steady on; slow tone at master
station—call must be reset at the calling bed station.
Priority:
White dome light slow flash; medium tone at master
station— call must be reset at the calling bed station.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Call Priority
Accommodate the specific needs of each patient: Use the PRIORITY
key to change a station’s call priority.
Tek-CARE® NC300 II
In-Service Training
Input the room and bed number you wish to change and then press
the PRIORITY key. The display will change to PERS. ATTN., and then to
PRIORITY and finally back to ROUTINE as you press the key repeatedly.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Privacy
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
With privacy on, the nurse master station cannot listen to the
patient’s room unless the patient initiates the call. If the call
originates at the nurses’ master station, the nurse will not be able
to hear the patient, but can make an announcement.
Input the room and bed number you wish to change and then press
the PRIVACY key. Do
so again to remove
privacy.
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Capture
A master station may need to cover just one zone (area) during the
day, and two or more zones at night. This reconfiguration is
accomplished with only a few key strokes.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
Press the CAPTURE key. In the dialog box that appears, choose
which zones the master needs to cover. Then press the ALPHA key
and the # key to save
the new setting.
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Alpha
Room numbers may include alphabetic characters, such as “A101.”
Use the ALPHA key to select these rooms.
Tek-CARE® NC300 II
In-Service Training
Press the ALPHA key. The red LED will light and all key presses will
result in alphabetic characters until ALPHA is pressed again.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Tone On
Call tones audibly indicate the priority of incoming calls. The tone for
a routine call can be silenced.
Tek-CARE® NC300 II
In-Service Training
Press the TONE ON key. The LED will turn off and the tone for the
routine call will be silenced until a new call comes in. Tone on/off
status is also indicated in the lower left of the video display.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Nurse, Aide
Easily dispatch staff to calling locations using the NURSE and AIDE keys.
Tek-CARE® NC300 II
In-Service Training
Answer the call at the master station, and if assistance is needed,
press the NURSE, AIDE or both keys and then end the call. This
causes the green and/or amber dome lights to flash (simultaneously,
if both NURSE and AIDE are pressed).
(continued on next slide)
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Nurse, Aide
(continued)
Ending the call removes it from the left of the master station screen.
The staff request room number begins flashing under the NURSE or
AIDE column on the right.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
When entering the room, the staff member presses the NURSE or
AIDE presence switch. The dome lights and the master station
indicators then
change from
flashing to
steady, indicating
presence in the
room.
(continued on next slide)
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Nurse, Aide
(continued)
When leaving the room, the staff member presses the NURSE or AIDE
presence switch again, canceling all presence indicators.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
If presence stations are not used, the staff member presses the bed
station’s reset button to cancel all presence requests.
The master
station operator
can see at a
glance which
calls still require
assistance and
where staff
presence is
registered.
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—STAT
Quickly upgrade a call from routine to the highest priority using the
STAT key.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
Answer the call at the master station, and if emergency assistance
is needed, press the STAT key and then end the call. This causes
the green and amber dome lights to flash alternately, while a rapid
tone sounds at the
master and duty
stations.
(continued on next slide)
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—STAT (continued)
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
When entering the room, the staff
member presses the NURSE or AIDE
presence switch. The dome lights
and the master station indicators
then change to steady, indicating
presence in the room.
When leaving the room, the staff
member presses the NURSE or AIDE
presence switch again, canceling all
presence indicators.
If presence stations are not used,
the staff member presses the bed
station’s reset button to cancel the
STAT request.
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Page
The audio PAGE key is used to make an announcement to staff via
patient and duty stations.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
Press the PAGE key twice to page all stations assigned to the
master—or press the PAGE key and then a zone letter key to page a
single zone—or press the PAGE key, the ALPHA key, the NURSE or
AIDE key, and then the # key to page staff-registered stations. (Feature
available only with presence switches.)
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—View
Tek-CARE® NC300 II
In-Service Training
Pressing the VIEW key displays the Station Information box. Enter a
room and bed number to review the configuration of a specific room
station, such as priority, privacy, assigned zones and paging. Then
press the # key to view the next station’s configuration.
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Follow
The FOLLOW key allows the staff to receive call tone annunciation
while in a patient’s room.
Method 1: Send calls to a specific room
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
With no calls pending, enter the desired room number and then
press the FOLLOW key. Go to that room. If another call is placed, the
bed station’s red RESET light will illuminate and a tone will sound.
(This call indication can be silenced by pressing the bed station’s
RESET button.) Upon return to the master station, press the FOLLOW
key to disengage the feature.
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Master Station Operation
Hot Keys—Follow
Method 2: Requires Nurse/Aide Presence Stations
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
With no calls pending, press the FOLLOW key. Proceed to a room and
press the nurse or aide registration button. If another call is placed,
the bed station’s red RESET light will illuminate and a tone will sound.
To change rooms, press the staff registration button when leaving the
room, go to another room and press its staff registration button. Press
the button again when leaving the room. Upon return to the master
station, press the FOLLOW key to disengage the feature.
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
These are the most frequently used functions of the master station.
Later, we’ll explore additional keys and programming functions. This
next section shows the many equipment options that are available.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
System Configuration Options
Radio Paging
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
Patient / Resident Room
Management
Monitoring &
Reporting
System
NC305LCD
Programming
NC305LCD
Master
Central
Equipment
(CE)
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
Radio Pocket Paging
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
A nurse call system that includes
pocket pagers automatically pages
the correct staff members with the
room, bed number and call type of
each incoming call.
Custom paging is also available on
the NC305LCD masters, using a
computer keyboard connected to the master station. Press MENU,
6, # on the master station to switch to the keyboard. On the
keyboard, press F1, 5, and then type the pager number, the
message beep rate, type a message and press ENTER.
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
Patient Call Stations
Patient Call Stations are available with or without voice intercom.
Other options include integral pull cord; DIN or ¼" call cord jacks;
and Hill-Rom Side Com adapter.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
Single and Dual DIN call cord jacks
with voice intercom
accommodate pillow speakers
(used by nursing homes & hospitals)
Integral pull cord
with voice intercom
(used by assisted
living facilities)
¼" call cord,
no intercom
(used by
nursing homes
& hospitals)
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
Call Cords
With a variety of call cords available, the
Tek-CARE® NC300 II nurse call system
is accessible to all patients and tenants.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
Besides their nurse call and intercom
functions, pillow speakers can control
room lights, reading lights, TV and radio.
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Configuration Options
Peripheral Devices
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
Patient call stations have inputs for all
of these peripheral devices, and they
accept inputs from smoke detectors
and N.O. magnetic contacts.
Dome lights are available with one, two
or four bulbs for various applications.
There’s even a four-bulb supervised
dome light that signals a fault if a bulb
burns out.
NC305LCD
Programming
Nurse and Aide
Presence Switch
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
Emergency / Bath Call
Switch with pull cord or pull
down actuation. Also
available in water-resistant
and addressable versions.
Code Call Switch with
pull down actuation is
supervised. Addressable
version is also available.
Emergency Switch
with large push
button
NC305LCD Programming
The next section describes some
of the Tek-CARE® NC300 II
programming and customization
features that are accessed using
the MENU key.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Custom Call Station Labels
When a patient places a call, the patient’s name or other descriptor is
displayed on the master station monitor. Use the Program Custom
Label function to enter each patient’s name (up to 16 characters).
Tek-CARE® NC300 II
In-Service Training
Press MENU, 2, 2
Table of Contents
NC305LCD
Operation
Press 5 to enter the
label for bed #1, or
Press 6 to enter the
label for bed #2
Configuration
Press ALPHA
NC305LCD
Programming
Type the desired label
Introduction
Enter the room and bed number
Press ALPHA and then
press # repeatedly until
the previous screen
returns.
Press RESET.
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Master Call Response
Tek-CARE® NC300 II
In-Service Training
Table of Contents
A master station can be programmed to receive only certain calls—
high priority (emergency, code) calls, for example. For each master
station, choose whether it will receive all or only some of the 12 call
types.
Press MENU, 2, 1, 5
NC305LCD
Operation
For each call type shown,
press 1 to receive calls (YES),
press 0 to ignore calls (NO),
or press # for no change.
Configuration
Press RESET
Introduction
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Station Add/Delete Function
If a call station is defective, the master station will display the
problem and location. The defective station can be taken offline
until it is repaired or replaced. (Call qualified service personnel.)
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
Press MENU, 2, 2
Enter the room and bed number
Press 2
Press 0 to place the
station offline (NO);
Press 1 to bring the
station online (YES)
Press #
Press RESET
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Call Response Overtimes
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Call response overtime can be set for SERVICE REQUEST and
ROUTINE, DUTY & STAFF call types. If a routine call is not responded to
within the time limit, the call priority increases by one level and the
call must be reset at the patient station. If a nurse/aide request
goes overtime, the system places a routine call from that room,
while continuing the nurse/aide request.
Press MENU, 3, 2
Press 1 to set Staff, Routine
& Duty call overtime;
Press 7 to set Service
Request call overtime.
Enter number of minutes
(00–12) and press #.
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Pager Zone & Call Type Assignments
Radio Pocket Paging adds another communication level to the
nurse call system. Specify which zones and which call types each
pager will receive calls from.
Tek-CARE® NC300 II
In-Service Training
Press MENU, 2, 4, 1
Table of Contents
NC305LCD
Operation
Press ALPHA and then use
the letter keys to select
which zones and call types
to assign to the pager.
Configuration
Press ALPHA, #, RESET
Introduction
Enter the pager number and press #
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Assign Pagers to Rooms
Each room can have one or more radio pocket pagers specifically
assigned to receive its calls.
Press MENU, 2, 4, 2
Tek-CARE® NC300 II
In-Service Training
Enter the room and bed number
Table of Contents
For each pager shown, press 1 to assign it to the room (YES), press 0 to remove it
from the room (NO),
or press # for no change.
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
NC305LCD Programming
Password Protection
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
With all these programming functions so easily available, it’s
important to password protect the system. Determine which menu
items require a password with Set Password Requirements. Then
add up to 20 usernames & passwords.
Press MENU, 2, 5 to set password requirements. For each item shown, press 1 to require a password (YES),
or press 0 if no password is needed (NO), or press # for no change. Press RESET.
Press MENU, 2, 6 to set
usernames and passwords.
Enter the username and
press #. Enter the password
and press #. Enter the
password again to confirm
and press #. Press RESET.
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.
This concludes the Tek-CARE® NC300 II Microprocessor Nurse Call
System In-Service Training Presentation. For your convenience, a
quick reference guide is located in the pull-out drawer on the master
station.
Tek-CARE® NC300 II
In-Service Training
Table of Contents
Introduction
NC305LCD
Operation
Configuration
NC305LCD
Programming
277 Industrial Park Rd.
Franklin, NC 28734
(800) 327-8466
www.tektone.com
Copyright © TekTone® Sound & Signal Mfg., Inc. All Rights Reserved.