Transcript Document

Impact Wrenches
Available in 3/8, 1/2 and ¾ inch drive.
Compression Gauge
Ranges from 0 to 300 pounds.
Battery Pliers
Used for removing battery terminals. The end clearance prevents cell-cover damage.
Power Timing Light
Operates on 6 or 12 volt DC producing a blue-white flash for reading of timing mark.
Spark Plug Gauge Set
Usually ranges from .020 to .040 thick wire sizes.
Torque Wrench
Comes in 1/4, 3/8, 1/2, and ¾ inch drives.
Retaining Ring Pliers
User for remove and install internal and external retaining (snap) rings.
Tachometer
Useful for checking speed on tools, machines, and engines.
Expansion or Adjustable Reamer
Used for reaming piston pin holes, king pin holes, holes for water pump bushings, valve stem guides and other precision
reaming jobs.
Air Pressure Type Grease Gun
It is portable but must be attached to an air line.
Lever Type Grease Gun
It is filled by hand, cartridge, or from an air pressure gun.
Zerk Grease Fitting
This fitting will withstand high pressure. The grease gun "snaps on" to the fitting.