Transcript Slide 1

ROCHESTER LATA 620
CUSTOMER NAME and ACNA
Subtending
Localities
CALEDONIA
*CHATFIELD
NPA-NXX’S
ROCHMNRO12T
ACCESS TANDEM
*ROCHESTER
*ST CHARLES
*STEWARTVILLE
WINONA
LERG SWITCH
CLLI
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 2/28/08
* Locality covered by local tandem –
submit diagram for local tandem,
also.
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
1
ROCHESTER LATA 620
INSTRUCTIONS
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXX’s* assigned to the switch and in LATA 620 (on
ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire.)
In center left boxes enter LERG switch CLLI (this is always the PSL on the Access
Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the
Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA
must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point
code (actual switch CLLI is always the CSL and the point code is entered in the
CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual
switch CLLI may be the same if the actual switch is in the same LATA and then PSL
and CSL would be the same CLLI.
EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle
and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter
2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W
SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks
requested.
Indicate the QWEST localities where you will be conducting business by changing the
color to red.
* Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
2
ROCHESTER LATA 620
CUSTOMER NAME and ACNA
Subtending
Localities
ALBERT LEA
AUSTIN
NPA-NXX’S
OWTNMNOW12T
ACCESS TANDEM
FARIBAULT
GLENVILLE
NEW SWEDEN
NICOLLET
LERG SWITCH
CLLI
**NORTHFIELD
*OWATONNA
ST PETER
WASECA
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 2/28/08
** Locality covered by
STPLMNMK30T tandem – submit
diagram for STPLMNMK30T tandem,
also.
* Locality covered by local tandem –
submit diagram for local tandem,
also.
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
3
ROCHESTER LATA 620
INSTRUCTIONS
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter full NPA-NXX’s* assigned to the switch and in LATA 620 (on
ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire.)
In center left boxes enter LERG switch CLLI (this is always the PSL on the Access
Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the
Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA
must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point
code (actual switch CLLI is always the CSL and the point code is entered in the
CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual
switch CLLI may be the same if the actual switch is in the same LATA and then PSL
and CSL would be the same CLLI.
EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle
and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter
2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W
SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks
requested.
Indicate the QWEST localities where you will be conducting business by changing the
color to red.
* Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
4
ROCHESTER LATA 620
CUSTOMER NAME and ACNA
NPA-NXX’S
Subtending
Localities
JACKSON
LUVERNE
WNDMMNWI12T
ACCESS TANDEM
MARSHALL
MORTON
PIPESTONE
LERG SWITCH
CLLI
REDWOOD FALLS
TRACY
WINDOM
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 2/2808
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
5
ROCHESTER LATA 620
INSTRUCTIONS
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter full NPA-NXX’s* assigned to the switch and in LATA 620 (on
ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire.)
In center left boxes enter LERG switch CLLI (this is always the PSL on the Access
Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the
Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA
must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point
code (actual switch CLLI is always the CSL and the point code is entered in the
CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual
switch CLLI may be the same if the actual switch is in the same LATA and then PSL
and CSL would be the same CLLI.
EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle
and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter
2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W
SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks
requested.
Indicate the QWEST localities where you will be conducting business by changing the
color to red.
* Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
6
ROCHESTER LATA 620
CUSTOMER NAME and ACNA
Subtending
Localities
CHATFIELD
ROCHESTER
NPA-NXX’S
ROCHMNRO23T
ST CHARLES
LOCAL TANDEM
STEWARTVILLE
LERG SWITCH
CLLI
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
7
ROCHESTER LATA 620
INSTRUCTIONS
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter full NPA-NXX’s* assigned to the switch and in the
ROCHESTER LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go
in CNPANXX fields on Translations Questionnaire). If no full NPA-NXX’s,
MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.
http://www.qwest.com/wholesale/clecs/slrn.html
•
•
•
•
In center left boxes enter LERG switch CLLI (this is always the PSL on the
Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the
ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned
by another OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG
and point code (actual switch CLLI is always the CSL and the point code is
entered in the CSPC field on the TRUNKING form of the ASR). LERG
switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and
label “2W SPOP LOCAL” and include quantity of trunks requested.
Indicate the QWEST localities where you will be conducting business by
changing the color to red.
*Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
8
ROCHESTER LATA 620
CUSTOMER NAME and ACNA
Subtending
Localities
OWATONNA
NPA-NXX’S
OWTNMNOW13T
LOCAL TANDEM
LERG SWITCH
CLLI
POI / ACTL CLLI
ACTUAL
SWITCH CLLI &
POINT CODE
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
9
ROCHESTER LATA 620
INSTRUCTIONS
•
•
•
•
•
•
Use previous slide as a template. Copy all and paste to new document
In top left box enter the full NPA-NXX’s* assigned to the switch and in the
OWATANA LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in
CNPANXX fields on Translations Questionnaire.) If no full NPA-NXX’s, MAY
REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.
http://www.qwest.com/wholesale/clecs/slrn.html
In center left boxes enter LERG switch CLLI (this is always the PSL on the
Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the
ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned
by another OCN, LOA must be provided.
In lower left hexagon enter actual switch CLLI from SHA screen in LERG
and point code (actual switch CLLI is always the CSL and the point code is
entered in the CSPC field on the TRUNKING form of the ASR). LERG
switch CLLI and actual switch CLLI may be the same if the actual switch is
in the same LATA and then PSL and CSL would be the same CLLI.
Enter a single line from POI/ACTL CLLI box to each local tandem circle and
label “2W SPOP LOCAL” and include quantity of trunks requested.
Indicate the QWEST localities where you will be conducting business
(pooling, porting, etc) by changing the color to red.
* Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”
REV. 2/28/08
DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams
are valid for 6 months from date of approval; implementation must occur within
that time frame.
10