Transcript Slide 1
PHOENIX LATA 666 CUSTOMER NAME and ACNA NPA-NXX’S PHNXAZMA01T ACCESS TANDEM LERG SWITCH CLLI POI / ACTL CLLI Subtending Localities *AGUA FRIA *HIGLEY ANTHEM JOSEPH CITY *BEARDSLEY *LITCHFIELD PARK *BLACK CANYON *MESA *CAVE CREEK *NEW RIVER *CHANDLER PARADISE VALLEY *CIRCLE CITY *SCOTTSDALE *DEER VALLEY SUPERIOR *FT MCDOWELL *SUPERSTITION GILA BEND WICKENBURG GILBERT WINSLOW *GOODYEAR * Locality covered by local tandem – submit diagram for local tandem, also. ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 1 PHOENIX LATA 666 CUSTOMER NAME and ACNA INSTRUCTIONS • • • • • • Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in LATA 666 (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter 2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks requested. Indicate the QWEST localities where you will be conducting business by changing the color to red. *Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 2 PHOENIX LATA 666 Subtending Localities CUSTOMER NAME and ACNA NPA-NXX’S PHNXAZMA07T ACCESS TANDEM LERG SWITCH CLLI POI / ACTL CLLI ARIZONA CITY *N. PHOENIX ASH FORK PAGE BUCKEYE PAYSON CAMERON *PEORIA *CAMP VERDE *PHOENIX CASA GRANDE PINE *CHINO VALLEY *PRESCOTT COOLIDGE *SEDONA *COTTONWOOD *SOMERTON ELOY STANFIELD *FLAGSTAFF *TEMPE FLORENCE *TOLLESON GLEN CANYON CITY *WELLTON *GLENDALE WHITLOW GRAND CANYON *WILLIAMS *HUMBOLDT YARNELL MARICOPA *YUMA *MUNDS PARK ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 * Locality covered by local tandem – submit diagram for local tandem, also. DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 3 PHOENIX LATA 666 CUSTOMER NAME and ACNA INSTRUCTIONS • • Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in LATA 666 (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). • In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. • In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. • EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter 2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks requested. • Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 4 PHOENIX LATA 666 CUSTOMER NAME and ACNA Subtending Localities AGUA FRIA LITCHFIELD PHNXAMA04T BEARDSLEY MESA LOCAL TANDEM BLACK CANYON NEW RIVER BUCKEYE PEORIA CAVE CREEK PHOENIX CHANDLER SCOTTSDALE CIRCLE CITY SUPERSTITION DEER VALLEY TEMPE FT MCDOWELL TOLLESON NPA-NXX’S LERG SWITCH CLLI POI / ACTL CLLI GLENDALE GOODYEAR HIGLEY ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 5 PHOENIX LATA 666 CUSTOMER NAME and ACNA • • INSTRUCTIONS Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in the PHOENIX, AZ LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXX’s, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www.qwest.com/wholesale/clecs/slrn.html • In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. • In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. • Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested. • Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 6 PHOENIX LATA 666 CUSTOMER NAME and ACNA Subtending Localities PRESCOTT NPA-NXX’S PRSCAZMA46T LOCAL TANDEM CHINO VALLEY HUMBOLDT LERG SWITCH CLLI POI / ACTL CLLI ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 7 PHOENIX LATA 666 CUSTOMER NAME and ACNA INSTRUCTIONS • • • • • • Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in the PRESCOTT, AZ LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionaire). If no NPA-NXX’s, MAY request ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www.qwest.com/wholesale/clecs/slrn.html In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested. Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 8 PHOENIX LATA 666 CUSTOMER NAME and ACNA Subtending Localities WELLTON NPA-NXX’S YUMAAZMA01T SOMERTON LOCAL TANDEM YUMA LERG SWITCH CLLI POI / ACTL CLLI ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 9 PHOENIX LATA 666 CUSTOMER NAME and ACNA • • • • • • INSTRUCTIONS Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in the YUMA, AZ LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXX’s, MAY REQUEST ARLRN. SEE ARLRN PCAT FORM MORE INFORMATION. http://www.qwest.com/wholesale/clecs/slrn.html In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested. Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 10 PHOENIX LATA 666 CUSTOMER NAME and ACNA Subtending Localities ASH FORK CAMERON NPA-NXX’S FLGSAZEA00T FLAGSTAFF LOCAL TANDEM MUNDS PARK WILLIAMS LERG SWITCH CLLI POI / ACTL CLLI ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 11 PHOENIX LATA 666 CUSTOMER NAME and ACNA INSTRUCTIONS • • • • • • Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in the FLAGSTAFF, AZ LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXX’s, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www.qwest.com/wholesale/clecs/slrn.html In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested. Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 12 PHOENIX LATA 666 CUSTOMER NAME and ACNA Subtending Localities SEDONA CAMP VERDE NPA-NXX’S CTWDAZMA00T COTTONWOD LOCAL TANDEM LERG SWITCH CLLI POI / ACTL CLLI ACTUAL SWITCH CLLI & POINT CODE REV. 2/28/08 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 13 PHOENIX LATA 666 CUSTOMER NAME and ACNA INSTRUCTIONS • • • • • • Use previous slide as a template. Copy all and paste to new document In top left box enter the full NPA-NXX’s* assigned to the switch and in the COTTONWOOD, AZ LOCAL CALLING AREA (on ASR, full NPA-NXX’s should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXX’s, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION. http://www.qwest.com/wholesale/clecs/slrn.html In center left boxes enter LERG switch CLLI (this is always the PSL on the Access Service Request Form of the ASR) and POI/ACTL CLLI (this is the ACTL on the Access Service Request Form). If POI/ACTL CLLI is owned by another OCN, LOA must be provided. In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI. Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested. Indicate the QWEST localities where you will be conducting business by changing the color to red. * Full NPA-NXX’s – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder” REV. 2/2808 DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame. 14