Transcript Cellular telecom networks

Cellular telecom
networks
Cellular telecom networks
Introduction
Coaxial Antenna Line
Jumpers
Connectors
Feeders
Clamps
Surge arrestors
HYPERCELL® Products offer all
passive components between
BTS and antennas.
HYPERCELL® ensures a perfect
mechanical and electrical integrity
between radio equipments.
Grounding kits
Waterproofing
kits
2
*LTE is a trade mark of ETSI
Cellular telecom networks
Ultra Low Loss 50 Ohms Corrugated cables
Inner conductor
• Smooth or Corrugated Copper tube
Dielectric
• Ultra Low-Loss dielectric made
of foamed polyethylene
Outer conductor
• Corrugated outer conductor
Outer jacket
• Black polyethylene jacket
All our cables
are 100% factory
controlled!
3
Cellular telecom networks
Connectors
Interface
• Available in DIN 7/16 and N, in straight and
elbow type
Reduce inventory OPEX
• New plating fitting with most of cables
Performances
• Excellent VSWR
• Low intermodulation ensured
Easy to use
• 2-piece connectors. Fast, easy
and reliable assembly
• Preparation tool available
Waterproofness
• IP 68
4
Cellular telecom networks
Jumpers
Interface
• Available in DIN 7/16 and N,
in straight and elbow type
Flexibility
• Low bending moment
• Available in flexible, super flexible
and ultra flexible
Jacket
• Polyethylene (PE)
• Indoor / Outdoor LSOH Fire-retardant
Performances
• Soldered connectors to ensure low VSWR
and passive intermodulation
Waterproofness
• IP 68
5
All our cables
are 100% factory
controlled!
Cellular telecom networks
Surge arrestors
Quarterwave
Power
• Up to 2500 W
Discharge
• Current discharge up to 100 kA
Maintenance
• Maintenance free
Gas Tube
Power
• Up to 1000 W
Discharge
• Current discharge up to 20 kA
Bandwidth
• Broadband
6
Cellular telecom networks
Grounding kits
Type
• Framework type for an integrated solution
Compatibility
• Fit both copper and aluminium cables
Easy to install
• Easy, fast and reliable installation
Size
• Ground cable available
in 0.6m and 1m length
Environment
• IP 68 waterproofness thanks
to an integrated vulcanizing rubber
• Corrosion resistant
7
Cellular telecom networks
Clamps and hangers
Fonction
• Support cables every meter. Avoid any risk
of slipperage or longitudinual deformation:
- Cable weight
- Wind velocity
- Gusts
- Induced turbulences
- Vibrations of tower
In severe conditions
• In some critical areas, ice accumulation will
increase the overall loading. In such case,
a reducing in the hanger spacing is necessary
8
Cellular telecom networks
Waterproofing kit
Components
• Self vulcanizing rubber tape, wrapped
around the connections, then recovered
with a PVC tape to protect against
mechanical damage and UV rays
Protection
• Protects IP 67 connectors and jumpers
to antenna interfaces from moisture or
water ingress
IP 68 connectors do
not need using any
waterproofing kit
9
Thanks for your attention !
Visit our website www.acome.com
HYPERCELL®
*LTE is a trade mark of ETSI
10