Transcript SolidWorks Practice Certification Exam

SOLIDWORKS PRACTICE
CERTIFICATION EXAM
PRO PART 1
Pirate Nation Engineering
Question 1 of 5
For 25 points:
Build this part in SolidWorks (Save art after each
question in a different file in case it must be
reviewed
Unit System: MMGS (millimeter, gram, second)
Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density = 0.0027 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which
correspond to the dimensions labeled in the
images:
A= 145mm
B= 60mm
C= 182mm
D= 25mm
Y= 1.5 * B + 15mm
Hint #1: The dimensions that are to be linked or
updated and are variable will be labeled with
letters. Any dimensions that are simple value
changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked
dimensional values and equations.
What is the mass in grams?
2
Question
1 of 5
3
Question
1 of 5
4
Question
1 of 5
5
Question
1 of 5
Question 2 of 5
For 20 points:
Using the part built in the previous question,
reconstruct the part using the following parameters.
Unit System: MMGS (millimeter, gram, second)
Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density = 0.0027 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which
correspond to the dimensions labeled in the
images:
A= 137mm
B= 62mm
C= 182mm
D= 26mm
Y= 1.5 * B + 10mm
What is the mass in grams?
6
Question
2 of 5
Question 3 of 5
For 25 points:
Build this part in SolidWorks (Save art after each
question in a different file in case it must be
reviewed
Unit System: MMGS (millimeter, gram, second)
Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density = 0.0027 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which
correspond to the dimensions labeled in the
images:
A= 148mm
B= 64mm
C= 176mm
D= 26mm
E= Hole Wizard Standard: ISO
Type: HEX Socket CTSK Head ISO10642
Size: M8
Fit: Normal, Through All
Y= 1.5 * B + 20mm
Z=2 * D
What is the mass in grams?
7
Question
3 of 5
8
Question
3 of 5
9
Question
3 of 5
10
Question
3 of 5
Question 4 of 5
For 25 points:
Using the part built in the previous question,
reconstruct the part using the following parameters.
Unit System: MMGS (millimeter, gram, second)
Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density = 0.0027 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which
correspond to the dimensions labeled in the
images:
A= 140mm
B= 57mm
C= 174mm
D= 27mm
Y= 1.5 * B + 20mm
Z=2 * D
What is the mass in grams?
11
Question
4 of 5
Question 5 of 5
For 25 points:
Build this part in SolidWorks (Save art after each
question in a different file in case it must be
reviewed
Unit System: MMGS (millimeter, gram, second)
Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density = 0.0027 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which
correspond to the dimensions labeled in the
images:
A= 137mm
B= 58mm
C= 175mm
D= 28mm
Y= 1.5 * B + 20mm
Z=2 * D
What is the mass in grams?
12
Question
5 of 5
13
Question
5 of 5
14
Question
5 of 5
15
Question
5 of 5