Transcript Document

NIC Components Corp.
New – Expanded Products
October 2001
- New High Frequency Products (Slide 2)
- New Low ESR Capacitor Products (Slides 3 ~ 5)
- New Reduced Size Components (Slide 6)
- Niobium Electrolytic Capacitors (Slide 7)
- New Technologies (Slide 4, 6 & 7)
1
also see www.lowESR.com
MULTILAYER CERAMIC CHIP CAPACITORS :
New – Expanded Products
NMC-L Series:
Low ESR NPO Ceramic Chip Capacitors
 0402, 0603, 0805
 O.5 ~ 150pF
 Low ESR at high frequency
Ultra-Stable Ceramic Chip Capacitors suit Bluetooth Applications
NIC, one of the leading names in the passive components market, has added a new range of
low ESR multilayer ceramic chip capacitors to its portfolio of products. With ESR as low as 0.30 ohm
for capacitance values of between 22pF and 47pF at 500MHz, the NMC-L series is ideally suited to
high speed, high frequency applications such as those found in Bluetooth products. Manufactured
using ultra stable, low loss NPO/COG dielectric, the devices are available with values ranging from
0.5pF to 100pF. Both 50V dc and 100V dc rated parts are available. A broad operating temperature
range of –55....C to +125....C makes them suitable for use in most environments. Capacitance
stability is also very high with a figure of 0±30ppm/°C quoted across the temperature range. Many
wireless and Bluetooth designs are housed in extremely small enclosures. The NMC-L range is offered
in both 0603 and 0805 case sizes making placement easy in such applications where printed circuit
boards can be extremely densely populated. An even smaller 0402 version is currently in
development. Nickel barrier terminations and stringent quality controls in the manufacturing process
mean that NMC-L ceramic chip capacitors have excellent mechanical strength. This is particularly
important in portable communications applications where equipment has to meet tough vibration and
drop test specifications. Supplied in tape and reel packaging, the NMC-L range is compatible with both
re-flow and flow soldering processes.
2
SOLID ALUMINUM ELECTROLYTIC CAPACITORS:
New – Expanded Products
also see www.lowESR.com
NSPZ Series
Low ESR Solid Aluminum Electrolytic Capacitors in SMT V-Chip
» Capacitance values from 15uF ~ 680uF (±20% capacitance tolerance)
» Voltage ratings form 4 ~ 25VDC.
» Case sizes (DxL) include 6.3mm x 6.3mm, 8mm x 7mm and 10mmx 8mm.
NIC Components continues to address the growing needs for low ESR capacitors with the
release of the NSPZ series of surface mount (SMT) solid polymer aluminum electrolytic
capacitors. NSPZ series features:
 Ultra-low ESR and impedance (as low as 0.025ohm)
 High ripple current ratings (up to 2.5Arms; +105ºC/100KHz)
 Ideally suited for lower voltage - high current power management applications, including
dc-dc converters and switchers.
Rated for operation at temperatures between -55 ~ +105ºC and are compatible with reflow
soldering processes. The devices are supplied in tape-and-reel packaging for use with
automated pick-and-place manufacturing systems.
Pricing from $0.77 ~ 1.05 each in production quantities.
Lead time: 8 ~ 10weeks
3
HYBRID ELECROLYTE ALUMINUM ELECTROLYTIC CAPACITORS:
New – Expanded Products
also see www.lowESR.com
NSPE Series
Low ESR Hybrid Electrolyte Electrolytic Capacitors in SMT V-Chip
Featuring the low ESR characteristics of solid electrolyte types, but at lower cost, NIC's new
hybrid (solid -liquid electrolyte) NSPE series of surface mount (SMT) aluminum electrolytic
capacitors provide cost effective solution for power management applications. NSPE
series uses combination solid polymer and liquid electrolyte toreduce the ESR characteristic
and increase the ripple currentrating. NSPE series features low ESR and impedance (as low as
0.023ohm) with high ripple current ratings (up to 2.18Arms;+105ºC/100KHz).
Available in:
» Capacitance values from22uF ~ 820uF (±20% capacitance tolerance)
» Voltage ratings form 4 ~ 16VDC.
» Case sizes (DxL) include 6.3mm x 6.3mm, 8mm x 10.8mm and 10mm x 10.8mm.
Ideally suited for lower voltage - high current power management applications, including
power supplies, dc-dc converters and switchers. Rated for operation at temperatures between
-55 ~ +105ºC and are compatible with reflow soldering processes. The devices are supplied
in tape-and-reel packaging for use with automated pick-and-place manufacturing systems.
Pricing from $0.25 ~ $0.63 each in production quantities. Lead time: 8 ~ 10weeks
4
ALUMINUM ELECTROLYTIC CAPACITORS:
New – Expanded Products
also see www.lowESR.com
NRSG Series
Low ESR – Impedance Radial Leaded Aluminum Electrolytic Capacitors
» Capacitance values from 82uF ~ 4700uF (±20% capacitance tolerance)
» Voltage ratings form 6.3 ~ 35VDC.
» Case sizes (D) include 6.3mm, 8mm, 10mm & 12.5mm
NIC’s new lower ESR radial leaded aluminum electrolytic capacitors, NRSG series
features:
 Ultra-low ESR and impedance (as low as 0.016ohm)
 High ripple current ratings (up to 3.29Arms; +105ºC/100KHz)
 Ideally suited for high current power management applications, including voltage
regulator modules (VRM), dc-dc converters and switchers.
Rated for operation at temperatures between -40 ~ +105ºC and are compatible with
flow - wave soldering processes. The devices are supplied in bulk and tape-and-reel
packaging (contact NIC for availability of taped 12.5mm sizes) for use with auto insert
manufacturing systems.
5
REDUCED SIZE COMPONENTS:
New Products
0201 Size: 0.6mm X 0.3mm
Ceramic chip capacitors (MLCCs)
NPO: 0.47pF ~ 22pF; 25VDC, 50VDC
X7R: 39pF ~ 2200pF; 16VDC, 25VDC, 50VDC
Thick Film Chip Resistors
Ultra-small 0201 size thick film chip resistors are now available from NIC. Product series is
NRC02 (02 = 0201 size). -55°C ~ +125°C operating temperature range. Available in E24 and
E12 resistance values from 10ohm ~ 1Meg-ohm in +/-5%(J) and +/-10% (K) tolerances
respectively. Power rating is 1/20W (50mW) over -55°C to +70°C (de-rated to zero power at
+125°C). Resistance temperature coefficient of +/-200PPM/°C. Product advantages include:
Less board space required reduces total cost of board and end-product Can be placed closer to
ICs for reduced trace distance and improved performance in high speed circuits
Ideal for next generation reduced size - high density handheld products Supplied on punched
paper tape (8mm tape with component 2.0mm pitch; 10K qty per 7" reel) and compatible
with auto placement and reflow soldering. Pricing from $0.07~$0.09 each in production
volumes.
6
NEW TECHNOLOGY COMPONENTS:
New Products
41
Nb
92.90638
Niobium Electrolytic Capacitors
Niobium is one of the alternatives being considered to replace tantalum in
capacitors - as tantalum becomes less available and human rights issues are
raised about some of its African sources. Estimates, niobium is over 100 times
more plentiful than tantalum. The construction is exactly the same tantalum
conductive polymer capacitors (NIC NTP Series). It is anticipated that in the
future, niobium capacitors will be used for high-capacity devices (about
1000µF), which are too costly to produce using tantalum.
NIC’s niobium capacitor at a glance
Specifications:
Rated Voltage
2.5V
Capacitance
220uF
Size
(D) 7.3x4.3x2.8mm
ESR
0.055ohms
Part Number
To be determined
Samples
Fall 2001
Production
Early 2002
7