Transcript Document

Power Capacitor
Listing
DC Link Capacitors
Type IFP Features:
 Diameters 75, 85, 100, 116 and 136mm
 Height Range: 87 -350mm
 Low Inductance
 High RMS current
 Low ESR
 Voltage Range: 600V – 3000V
 Customizable
 Effective replacement for Electrolytic capacitors
 Segmented (fused) dielectrics available
Type TGC Features:
 Compact
 Easy Mounting tabs
 Low Inductance
 High RMS current
 Low ESR
 Voltage Range: 600V – 3000V
Type MEC-DL Features:
 Segmented (fused) dielectric plates
 Designed for PCB mounting
 Low Inductance
 High RMS current
 Low ESR
 Voltage Range: 450-1300V
DC Link Capacitors – Custom Design
Type IBL Features:
 Customizable
 Very high RMS current 300-700Amps
 High bulk capacitance
 Very low ESR – typically less than 0.5mOhms
Type MIC Features:
 Customizable
 Very high RMS current 300-700Amps
 High bulk capacitance
 Widely accepted in Rail systems versus oil types
 Very low ESR
 High vibration resistance – Epoxy molded
Snubber Capacitors
Type 329 Features:
 Self Healing
 Hybrid Construction for very high peak currents
 Low Inductance
 Multiple Terminal Styles (Flat, Step, wide spacing)
Type HVSC Features:
 Self Healing
 Hybrid Construction for very high peak currents
 High Voltage Snubber – Up to 2500Vrms
 Configured for CGT, GTO systems
 High vibration resistance
AC Filter Capacitors
Type X382 Features:
 Diameters 75, 85, 100, 116 and 136mm
 Height Range: 87 -350mm
 UL Approved to 1000Vrms at 10,000 AFC
 Easily paralleled (up to 75A pass through current)
 Gel (dry) or oil filled versions
 Customizable
Type HC Features:
 Diameters 75, 85, 100, 116 and 136mm
 Height Range: 87 -350mm
 UL Approved to 620Vrms at 10,000AFC
 Higher individual current (up to 80A RMS)
 Gel (dry) or oil filled versions
 Customizable
Type THD Features:
 Lower Cost Output AC Filter Capacitor (should not be used on input
filtering)
 Rack Bus bar Mounting
 Customizable
AC Filter Capacitors – MediumVoltage
Type LV-6 Features:
 Available 10 to 500KVAR @ 6600V
 Long Life rating (20 years)
Technology and Development
Recent/ Ongoing Technology Upgrades







3 new R&D facilities at Shizuki Japan Facilities (Okyama, Akita and Kyushu)
ASC AC life testing – 1200Vrms for 3 phase capacitors and 2400V for single phase capacitors
5000Vrms snubber capacitor testing (Medium Voltage Drives)
Shizuki is a leader in metallized surfaces on film for high energy density
Heavily involved in hybrid automotive market – developing market trends in film capability
Between ASC and Shizuki over 150 years of capacitor manufacturing experience
Widely diversified – Capacitors, Reactors, Power Equipment, Messaging, Flicker Suppression and Voltage Sag
equipment
Custom Display Systems
Reactors
V-Backup – up to 2000KVA
6600V