Transcript Slide 1

Updating the Maps
Step 2
Eclipse AVN726E / AVN76D
www.eclipse-web.com
Updating the
Eclipse Map Data
• Select Support > Map Updates
• Select AVN726E / AVN76D Detail
Updating the Maps
Step 2
Eclipse AVN726E / AVN76D
Download two software programs to your PC
1. Sync Tool
Software for the SD Card to transfer files
back & forth between your Device and PC
2. ToolBox
For your PC to manage the data
Step 1 Update is required before proceeding to Step 2
Scroll to the Step 2 Page
A minimum of 2 GB SD Card is required
Larger SDHC Cards are compatible but may require additional steps if
you exceed the on-board memory capacity of the AVN (1.8GB) If
necessary, see “How To Transfer Contents” in the FAQ Section at
www.naviextras.com
• Scroll down to Step 2
NaviExtras Map Update
Software for SD Card & PC
1. Download NaviExtras SyncTool
Software
• UnZip File
• Copy “Update” folder to a blank SD
Card
2. Download NaviExtras ToolBox Software
• Install ToolBox Software on to your PC
• Download Sync Tool to PC Desktop – Unzip and
transfer Updates Folder to blank SD Card.
• Download Toolbox Software to PC
Download SyncTool
Download SyncTool
Download SyncTool
• Unzip the Sync Tool File and Copy the “Updates” Folder to the
blank SD Card
Collecting Device Information
Summary
• Insert the SD Card with the Updates
Folder into the AVN
• Collect Device Information from the AVN
• Return to PC & proceed to ToolBox
Software
Collecting Device Information
•
•
•
•
Press Eject
Press Open
Place the SD Card into the device
Press Close
Collecting Device Information
• On the Navi Screen Press “Menu”
• Press “Settings”
Collecting Device Information
• Press the Arrow to advance to Page 2
Collecting Device Information
• Press “About”
Collecting Device Information
• Press “Update”
Collecting Device Information
• Press “Collect device information”
Collecting Device Information
• Press “YES”
Collecting Device Information
IMPORTANT !
Do not interrupt power during the collection process
This process requires less than 15 minutes to complete
Please Note: Vehicle must be running or ACC ON without interruption
• Upon completion, Press “OK”
Collecting Device Information
• Press “Quit”
Collecting Device Information
• Press “Yes”
Collecting Device Information
• Remove the SD Card
• Press “Continue”
– The AVN will Reboot
• Turn off the vehicle and return to the PC for Updating
Download Toolbox
ToolBox
Summary
• Close all other programs and download
ToolBox Software on PC
• Install and Open the ToolBox Software
Open ToolBox
• ToolBox requires an internet connection to communicate
to the Naviextra’s Update Server
Registering Device on the update server
• With the data collected, place the SD Card back into the PC
• Toolbox will recognize this as a “Device” and register with the
update server
• Toolbox will then show “Device Connected”
• The My Updates tab will show available updates for your
device
• Select My Updates
• Select “Install”
• Select “Yes” to create a back up of your current data before
installing new content
• The backup file name will be titled with the date or you can
change the name for familiarity
• The Back Up Process will take approximately 10 Minutes and
will indicate progress and the time remaining
• Once BU is complete press “Next”
• If present, uncheck Fix for Navigation
• Confirm that Latest Map Guarantee is checked
• Select Apply
IMPORTANT !
Do not to turn off or suspend the PC or interrupt the installation
wizard during the download process
• Click “Apply”
• Toolbox will begin downloading updates and provide a
status of the progress and the estimated time before
completed. (Slow internet connections require more time)
Download speed will vary depending on your internet
connection. On average, the complete update download
including POI’s is less than an hour
• Once completed, select “Done”
Updating the AVN
Summary
• Transfer the SD Card to the vehicle with the
New Data
• Restore Device Information
• Remove the SD Card
Updating the AVN
• Press Eject
• Press Open
• Place the SD Card into the device
Updating the AVN
• On the Navi Screen Press “Menu”
• Press “Settings”
Updating the AVN
• Press the Arrow to advance to Page 2
Updating the AVN
• Press “About”
Updating the AVN
• Press “Update”
Updating the AVN
• Press “Restoring to the device”
Updating the AVN
IMPORTANT !
Do not interrupt power during this process
This process requires about 10-15 minutes
• Upon completion, Press “OK”
Updating the AVN
• Press “Quit”
Updating the AVN
• Press “Yes”
Updating the AVN
• Press Eject and Remove the SD Card
• Press “Continue”
– The AVN will Reboot
• You have completed the Map Update Process
Confirm the New Maps
• On the Navi Screen Press “Menu”
• Press “Settings”
Confirm the New Maps
• Press the Arrow to advance to Page 2
Confirm the New Maps
• Press “About”
Confirm the New Maps
• Press “Maps”
Confirm the New Maps
• You will recognize the newer map dates
• Select Licenses for additional information
Updating the Maps
Step 2
Eclipse AVN726E / AVN76D
Please Visit
www.eclipse.naviextras.com/shop/portal/support
for additional support and FAQ