Transcript Updating the Eclipse Firmware

Updating the Software
Step 1
Eclipse AVN726E / AVN76D
To Begin, visit www.eclipse-web.com
• Select Support > Map Updates
• Select AVN726E / AVN76D Detail
• Prepare a Blank CD-R
• Scroll Down to Software Update Download
Step I – Software Update
• Download the latest firmware software (MN01xxxx.vbk)
• Burn this file to a blank CD
• Save the file to your desktop
• Do not change the file name or extension
• Once complete select Close
• Load a blank CD and Copy the file from the PC Desktop to
the CD-R Drive
• If you Receive a Confirm Stream Loss message – Click Yes
• Write the Files to a blank CD-R
• Eject CD-R from PC for use with the AVN and begin
software update
Software Update
4
2
1
1) Press the Open / Eject Button
2) Press the on-screen Eject
3) Insert the Update Disc into the AVN
4) Press Close
Software Update
• Press the “MENU” or “AV” button for the Main Menu
Screen
Software Update
• Press “Audio Off”
Software Update
2
5
1
3
4
6
• In sequence, press and release the four corners of the
screen as indicated
Software Update
•
Press “Yes” to begin update or repeat sequence until
you see Start Update.
Software Update
•
Wait for Screen to show “ECU Selection”
(The disc should have already been inserted)
Software Update
• Press Select
Software Update
• Press “OK” to begin Updating Process
IMPORTANT !
Do Not Turn Off the Vehicle
This process takes approximately 2 minutes
Software Update
• Screen will show “Program Loading” and show the blue
progress bar
Software Update
• Wait for the “Updating Complete”
• Press “OK”
Software Update
• The screen will verify that the New Version of software
has properly loaded
• Press “End”
Software Update Process Completed
•
•
•
•
Turn off the vehicle and wait approximately 10 seconds
Turn on the vehicle
Push “Eject” and remove the update disc
The Firmware Update Process is now complete
Proceed to
Updating the Maps
Step 2
Eclipse AVN726E / AVN76D
www.eclipse.naviextras.com/shop/portal/support