Self-regulating system to maintain water flow in gutters

Download Report

Transcript Self-regulating system to maintain water flow in gutters

Smart heat for
comfort and safety
Self-regulating
system
to maintain
water flow in
gutters and
downpipes
1
• The problem
• Raychem solution
• Features and benefits
2
Melted snow refreezes
•
•
•
•
Heat from the sun and the building
melt the snow on the roof which
refreezes
Roofs and gutters
Down spouts and drain lines
Flat roofs
Metal roofs
3
Risk for damage and safety hazard
• Gutter damage
due to weight of ice
• Structural damage due to ingress
of water
• Roof damage due to refreezing
• Safety hazard from icicle
formation
4
• The problem
– Damage and safety hazard due to refreezing water
• Raychem solution
• Features and benefits
5
The solution: keep the water flowing
The Raychem self-regulating
system provides a path whereby
melting ice and snow can drain
safely
• off the roof
• along the gutter
• down the drain pipe.
6
Self-regulating system to maintain
water flow in gutters and downpipes
1. Power connection
2. Heating cable
3. Support bracket for
drain pipes
4. End seal
5. Control unit or thermostat
(optional)
6. Moisture sensor
7. Temperature sensor
1
6
3
7
2
5
4
7
Two different systems
• The advanced system
– GM-2X heating cable and 8BTV-2-CT heating cable (bitumen)
– RayClic quick connection system
– EMDR-10 control unit
• The basic system
– Heating cables: FroStop Black
– Heat-shrink connection system
– HTS-D thermostat or EMDR-10
8
Gutter Frost protection sales channels
Commercial & Residential
Buildings
Sanitary channel
Construction projects
Domestic applications,
Private users.
Electrical channel
Advanced system
Basic system
9
A reliable, self-regulating heating cable
1
2
3
4
5
1. Large copper conductors
2. Self-regulating conductive core
3. Modified polyolefin insulation
4. Tinned copper braid for added protection
5. U.V. resistant modified polyolefin outer jacket
10
The self-regulating effect provides
energy savings
1. Heating cable in
snow at high power
2. Snow melts and
drains away
heating cable in dry
air at half power
3. Then heating cable
self-regulates in
dry air
W/m
°C
11
Economical to operate
• Self-regulating effect saves energy
• Adjusts to varying conditions on
the same roof
12
RayClic connections for easy and fast installation
3. close cover
1. insert sheathed
cable with Clip
2. tighten screws till
they are flush with
surface
4. tighten gland
nuts firmly
13
A connection module for each configuration
Heating cable connection to
power cable
Heating cable splice with
power cable
Heating cable T-connection with
power cable
Heating cable splice
Heating cable T-connection
Heating cable 4-way
connection
14
The EMDR-10 control unit operates
on temperature and moisture sensing
• Combined temperature and
moisture sensing
• Temperature sensor de-activates
the system at
– High temperatures
– Very low temperatures
(no melting)
• Moisture sensor de-activates the
system when there is no moisture
– No moisture
= no melt water
= no risks for leaks
15
How the EMDR-10 works?
1.
2.
3.
4.
Air temperature is lower than the set-point
Moisture measurement is activated after
10 minutes
If moisture is present, the heating cable is
switched on
Heating cable is switched off when:
1. Air temperature raises above setpoint
OR
2. Moisture is lower than set-point
OR
3. Air temperature is lower than the set
‚minimum‘ temperature.
16
More features of the EMDR-10 control unit
• Easy access for wiring the unit
• All parameters settable on front
panel
• Switching capacity up to 10 A
• Visibility on the different alarms by
flashing of LED’s
• An alarm relay output
• Increased protection by an easy
accesable fuse
17
The simple HTS-D thermostat
for small installations
• On/off
• Depending on min / max
temperature (controllable between
-15°C/ +15°C)
• For lengths below 30 m
18
• The problem
– Damage and safety hazard due to refreezing water
• Raychem solution
– A complete frost protection system for gutters
• Features and benefits
19
The smart Raychem system
+
Self-regulating cable
• Saves energy:
adjusts its heat
output
• Practical
• can be cut-tolength and
closely spaced
• for all roof
materials
+
Connection system
• Easy & Fast
– one component
– mechanical
connection
• Reliable: control
indicator to avoid
faulty installation
Controls
• More energy savings
• Easy set-up and
operation:
– Fast wiring
– Clear visual
interface
20
• The problem
– Damage and safety hazard due to refreezing water
• Raychem solution
– A complete frost protection system for gutters
• Features and benefits
– The Raychem system is practical and allows for energy savings
Thank you for your attention
[email protected]
www.tycothermalcontrol.com
Smart heat for comfort and safety
21