Transcript GlobeTech Laboratories

SERVICES:
•
•
•
•
•
Calibration
Testing
Precision Measurements
Product Certification
Research
•
•
•
•
•
Inspection
Commissioning
Validation
Instrumentation
Consultancy
GlobeTech Headquarters
PO Box 27415, 1645 Nicosia, Cyprus
Tel:+357 22 458260 Fax:+357 22 374535
e-mail:[email protected]
web:www.globetech-group.com
Services at a glance
www.globetech-group.com
Calibration
www.globetech-group.com
www.globetech-group.com
Chemistry & Microbiology
Mechanical Testing
www.globetech-group.com
Instrumentation
GlobeTech Quality Policy
Continuously improve and upgrade







organisation and lab network
procedures
expertise of motivated personnel with high academic qualification
personnel with broad professional experience and on going training
accreditation and scope
enhancements to the range of services are constantly being
introduced
expand the number of global partners and associate.
Services provided




high quality standard and lowest possible cost
offer the extend of services as an one stop shop
offer our clients high quality services and complete solutions to their
problems
offer specialised services and share information on the latest
developments.
www.globetech-group.com
Metrology & Calibration
Wide range of Calibration








Mass & Density
Temperature & Humidity
Pressure & Flow
Dimension & Volume
Force & Torque
Electrical & Electronic
Analyzers, safety and quality equipment
General& etc.
Majority of Calibration and Measurements is offered on site
Invested in Portable Laboratory Standards
Reduce turn around time
Operates under the accreditation of ISO17025
Full Environmental Control Laboratories in 8 countries
www.globetech-group.com
Wide range of Testing services such as but not limited to:


Testing






mechanical testing
physical testing
materials testing
products testing
analytical testing
chemical testing
microbiological testing
NDT testing
Operates under the accreditation of ISO17025
Full Environmental Control Laboratories in 8 countries
www.globetech-group.com
Product certification and
Precision measurements
Wide range of services and testing for CE marking




LVD (low voltage directive)
machinery directive
construction materials directive
pressure equipment directive
Wide range of precision measurements




dimension, weight, volume, density etc.
fundamental measurements
stereoscopic
Microscopic
Operates under the guidelines of ISO17025
Full Environmental Control Laboratories in 8 countries
www.globetech-group.com
Inspection & Measurements
Wide range of inspection such as but not limited to:












acoustics
vibration
thermal imaging
thermal mapping
dust
Illumination
radiation
emf
paint (coating thickness, holiday testing)
corrosion (ultrasonic)
thickness measurements
fluid and air flow
www.globetech-group.com
Commissioning
Wide range of commissioning services such as but not limited to:











HVAC commissioning
building and building services commissioning
BMS commissioning
air quality and monitoring
performance survey and report
acoustic evaluation
instrumentation and control
air and water balancing
start-up and O&M manuals
pre-commissioning
HART - transmitters
www.globetech-group.com
Validation and Qualification
Wide range of validation such as but not limited to:










DQ,IQ,OQ,PQ (qualification)
facility validation
HVAC validation
production, monitoring and laboratory instruments & equipment
safety equipment
bio-safety cabinets
HEPA integrity
clean room classification
storage and transportation
cold chain
www.globetech-group.com
Health, Safety and Environment
Wide range of measurements, analysis and surveys








emissions
noise
dust
vibration
air quality
water & waste
floor slipperiness
thermal imaging
www.globetech-group.com
Instrumentation
GlobeTech Group represent and distribute high quality instruments
for the need of the industry. Our sales engineers drawing on a
wealth of experience from various industries, enables us to meet
customer’s requirements. High standard after sales service and
support is provided by our experienced team.
Our companies support a number of industries of different
disciplines such as Maritime, Hotels, Hospitals, Laboratories,
Aviation, Chemical Industry, Medical Industry, Manufacturing,
Pharmaceutical Industries, Food Industries, Dairy Industries,
Construction, Telecommunications, Energy Industry, Catering,
Distribution, etc.
www.globetech-group.com
Consulting & Research
GlobeTech provides a comprehensive range of independent
technical consultancy and expert advice to its clients,





ranging from advice on purchasing of cost-effective metrology and
testing equipment to supply, training and support of high accuracy
standards, instruments, and equipment.
we undertake as turnkey projects full development of laboratories as
well as offering specialised training seminars etc.
advise on requirements for quality assurance, on the improvement of
industrial instruments and manufacturing automation, failure
Investigation and expert report, as well as independent inspection, etc.
advice on selection of proper safety and personal protective equipment
undertaking infrastructural and European funded projects
GlobeTech and its highly qualified personnel participate in various
research programs in collaboration with leading European academic
institutions. Through such involvement, the company is capable of
being at the forefront with technological advancements
www.globetech-group.com
Globetech services to
Enterprises that implement ISO 9001, ISO14001 and ISO18001

Manufacturing industries, Catering, Hospitals, Oil & Gas, etc.
Enterprises that implement GMP, GDP and GLP

Pharmaceutical, Life Sciences, Storage & Distribution, Laboratories, etc.
Enterprises that Implement HACCP / ISO 22000

Food & Dairy Industry, Hotels, Catering, etc.
Commercial Exchange

Petrol Stations, Supermarkets, Jewellers, etc.
Laboratories

Clinical, Analytical, Material Testing, etc.
Governmental Organisations

Consumer protection, market surveillance, reference laboratories etc.
www.globetech-group.com
GlobeTech Services
for Pharmaceutical & Life Sciences

GlobeTech provides the pharmaceutical & life sciences industry with
specialized validation qualification and calibration services to ensure
compliance with the industry’s strict Good Manufacturing Practices (GMP)
and Good Distribution Practices (GDP) as well as Good Laboratory Practices
(GLP).

As a leading provider of services, we offer expertise in GMP, GDP and GLP
compliance. Our experienced team of professionals work closely with your
quality assurance departments to ensure you meet the required standards.
Furthermore our calibration laboratory is fully accredited and operate in
accordance with the EN ISO / IEC 17025
www.globetech-group.com
GlobeTech Services
for Pharmaceutical & Life Sciences
Validation, Qualification and Calibration are ongoing activities covering development,
operation, and maintenance.

Validation is a systematic approach to collecting and analysing sufficient data to
give reasonable assurance and documented evidence that a process or a facility
will, when operated within specified parameters, consistently produce results within
predetermined specifications.

Qualification - when the above approach is related to a machine or equipment,
rather than Validation, this is referred to as Qualification. Qualification is part of, but
not limited to, a validation process, which in turn can be divided into Installation
Qualification (IQ), Operation Qualification (OQ), or Performance Qualification (PQ).

Calibration is a necessary component to ensure of the legitimacy of Qualification
and Validation. Calibration is a process that demonstrates a particular instrument
or device produces results within specified limits, as compared to those produced
by a traceable standard over an appropriate range of measurements. Calibration
activities must be performed with qualified instruments by an accredited laboratory.
GlobeTech Services
for Pharmaceutical & Life Sciences
GlobeTech broad range of services includes the following:
Calibration, validation and qualification constitute fundamental operations of GMP,
GDP and GLP. GlobeTech is dedicated to assist its clients in developing,
implementing and maintaining the quality and traceability of the accuracy of their
manufacturing, storage & distribution as well as laboratory equipment in order to
ensure the full compliance with all international guidelines. GlobeTech offers:
•
•
Calibration of all type of instruments and equipment on-site and in Lab (scheduled
periodic calibration)
Validation and Qualification (FAT, IQ, OQ & PQ) of environmental rooms and
chambers, incubators, refrigerators, freezers and all associated monitoring
equipment such as data logging systems etc. Qualification of facility as well as
HVAC systems, clean rooms, safety & bio-safety cabinets, production and
laboratory equipment.
 Chamber, Storage room & warehouse Temperature & Humidity mapping
 HEPA integrity test (DOP etc), Clean room classification
GlobeTech Services
for Food & Catering

Quality and safety are the key drivers in the food value chain. GlobeTech provides the
food & catering industry with specialized testing and calibration services to ensure
compliance with the industry’s strict local, national and international regulations and
HACCP requirements as well as the requirements of ISO22000.

GlobeTech is dedicated to assist its clients in developing, implementing and maintaining
the quality and safety at every sectors including:

Primary production

Transportation, logistics and trade

Processors and suppliers

Retail and hospitality

As a leading provider of services, we offer expertise in regulation and HACCP
compliance. Our experienced team of professionals work closely with your quality
assurance departments to ensure you meet the required standards. Furthermore our
testing and calibration laboratories are fully accredited and operate in accordance with
the EN ISO / IEC 17025
GlobeTech Services
for Food & Catering
GlobeTech broad range of services includes the following:
Testing and Calibration constitute fundamental operations of food quality and
safety . GlobeTech is dedicated to assist its clients in developing, implementing
and maintaining the quality and safety of the accuracy of their manufacturing,
storage & distribution as well as laboratory equipment in order to ensure the full
compliance with all international guidelines. GlobeTech offers:
•
Calibration of all type of instruments and equipment on-site and in Lab
(scheduled periodic calibration)
•
Testing of all food and water analysis, microbiological testing, plant and
equipment sanitation analysis.
For such a critical services you need a partner you can trust. With our accredited
laboratories, you can be sure that you are fully complying with safety guidelines.
GlobeTech Services
for Food & Catering
Testing and Calibration are ongoing activities covering efficient production of safe,
quality products.

GlobeTech is a leading provider of analysis, testing and calibration services to the food
and agricultural industry.

Testing - Food testing is integral to the efficient production of safe, quality products.

Calibration - Monitoring processes is an important part of product safety assurance
With the food industry increasingly subject to scrutiny, testing to ensure compliance
with food safety regulations and to protect public health, is a must.
and involves the use of many instruments and equipment - from thermometers and
pressure gauges to refrigerators, cold rooms, ovens, sterilizers, balances etc. Accurate
calibration of these instruments is essential. Our instrument calibration service is
specifically designed to meet industry’s calibration needs. Calibration is the process
that demonstrates a particular instrument or equipment produces results within
specified limits, over an appropriate range of measurements. Calibration activities
must be performed with qualified instruments by an accredited laboratory.
GlobeTech Services
for the manufacturing industry

Quality and safety are the key drivers in the manufacturing industry along with
sustainability. GlobeTech provides the industry with specialized testing, calibration,
measurements, validation and inspection services to ensure compliance with the
industry’s strict local, national and international regulations and CE marking as well as
the ISO9001, ISO18001, ISO1401 requirements.

GlobeTech is dedicated to assist its clients in developing, implementing and maintaining
the quality and safety at every sector.

As a leading provider of services, we offer expertise in regulation, CE and ISO
compliance. Our experienced team of professionals work closely with your quality
assurance departments to ensure you meet the required standards. Furthermore our
testing and calibration laboratories are fully accredited and operate in accordance with
the EN ISO / IEC 17025
GlobeTech Services
for the manufacturing industry
GlobeTech broad range of services includes the following:
Testing and Calibration constitute fundamental operations of the manufacturing
sector. GlobeTech is dedicated to assist its clients in developing, implementing
and maintaining the quality of their manufacturing as well as offer measurements
for sustainability (health, safety and environmental). GlobeTech offers:
•
•
•
•
Calibration of all type of instruments and equipment on-site and in Lab
(scheduled periodic calibration)
Testing of materials and products
Product certification
Health, safety and environment measurements
For such a critical services you need a partner you can trust. With our accredited
laboratories, you can be sure that you are fully complying with regulation.
GlobeTech Services
for the construction industry
Quality and safety are the key drivers in the construction industry along with
sustainability. GlobeTech provides the industry with specialized testing,
calibration, measurements, commissioning, validation and inspection services to
ensure compliance with the industry’s strict local, national and international
regulations and CE marking as well as the ISO9001, ISO18001, ISO1401
requirements.
GlobeTech is dedicated to assist its clients in developing, implementing and
maintaining the quality and safety at every sector.
As a leading provider of services, we offer expertise in regulation, CE and ISO
compliance. Our experienced team of professionals work closely with your quality
and safety assurance departments to ensure you meet the required standards.
Furthermore our testing and calibration laboratories are fully accredited and
operate in accordance with the EN ISO / IEC 17025
Complete Service from the
Complete Service provider
•
•
•
•
•
Cyprus
Bahrain
Calibration
Testing
Precision Measurements
Product Certification
Research
Inspection
Commissioning
Validation
Instrumentation
Consultancy
Depend on Competence !
Greece
Lebanon
Saudi Arabia
Qatar
UAE
CONTUCT US:
GlobeTech Headquarters:
PO Box 27415, 1645 Nicosia, Cyprus
Tel:+357 22 458260 Fax:+357 22 374535
e-mail:
[email protected]
Web:
www.globetech-group.com
•
•
•
•
•
Bulgaria
Malta
UK
GlobeTech Group
Complete Service from the Complete Service provider
GlobeTech Bulgaria BG
GTM s.a.r.l (Lebanon)