Transcript PCB Handling Machine

http://www.eunil.com
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine is used to separate
the arrayed printed circuit board (PCB) / printed
wiring board (PWB) from the main panel PCB. This
equipment is automatically supplied PCB from the
downstream machine or manually loaded PCB by
the operator. This machine is using the high
revolution milling spindle to separate PCB. It would
be connected with the automatic PCB unloading
system as an option.
It could be applied to Screw Application machine.
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
This machine is used to separate the main panel PCB and the
arrayed PCB as off-line.
The operator manually load PCB to the machine. Then, the machine
will separate the PCB by the program. When it finishes the job, the
PCB will be unloaded by the operator.
The movement is controlled by the robot, 2 X-Axis, 1 Y-Axis, 1 ZAxis.
It has a single spindle head and it will also have dual spindle head as
an option.
It has two shuttle, working bay, which has the safety feature.
The shuttle has PCB holding fixture for every different model of
PCB.
It will suck out the dust or the milling particles to the dust collector.
It has the bit optimization and the bit break detection as an option.
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Features
Movement : X, Y, Z Axis
Working Bay : Shuttle
Programming : PLC and Robot
teaching
Monitor and Operating : 5” Touch
screen
Bit : Quick change
Safety : Door and Barrier Optimal
sensor
Option
Bit optimization : Count No. of
worked PCB
Bit break detection
Dual head spindle
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Specification
Machine size (mm)
1,200 X 1,250 X 1,600
PCB size (mm)
330 X 250 ~ 50 X 50
No. of Head
Single (Dual as option)
Robo
t
X-Axis
600mm stroke
Y-Axis
600mm stroke
Z-Axis
100mm stroke
Repeatabili
ty
±0.02mm
Speed
Max. 1,000mm/sec
Spindle
Max. 60,000rpm milling spindle
Power supply
220V[±5%], 50~60Hz, 1Phase
Power
consumption
5,000 Watt
Air supply
5 bar
Programming
PLC & Robot teaching
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Head & Spindle Specification
No. of Head
Single (Dual as option)
Spindl
e
Speed
Max. 60,000 rpm
Power
150W, 30V, Max. 1,000Hz
Type
Milling
Maker
KAVO
Type
Chipbreaker, Downdraft
Life time
90 M
Recomme
nd
Cut
condition
38,000 rpm
83mm/sec movement
( It would be different due
to PCB condition )
Size
Ø1.6mm
Bit
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Robot Specification
Robo
t
Z-Axis
Y-Axis
X-Axis
Shutt
le
Safety
X-Axis
600mm stroke
Y-Axis
600mm stroke
Z-Axis
100mm stroke
Speed
Max. 1,000mm/sec
No. of
shuttle
2 shuttles
Fixture
1 PCB holding
Optimal sensor
Safety : Barrier Optimal Sensor
Shuttle : 1 PCB holding fixture
( Photo as option)
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Dust collector Specification
Size (mm)
450 X 520 X 900
Blower
Volume
25 m³/min
Pressure
230 mmAq
Motor
1.5 kw
Material
Polyester
Cleaning
Manual
Filter
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.
http://www.eunil.com
PCB Router / Depanel machine : Off-Line ETR-200
Routing PCBs Feature
Best condition
for using PCB
Router / Depanel
machine
Recommended
High rate of bit
break
Short bit life
time
Create lots of
dust / routing
particles
(株)誾
日
World Wide Leader PCB HANDLING EQUIPMENT
Everyday is a good day
EUNIL Co., Ltd.