Transcript Manufacturer Profile

Manufacturers Profile
•
Prototype, small to medium, quick turn production in Taiwan
•
High volume production in China available
•
Certificates : ISO/TS 16949 : 2002
ISO 9001 : 2000
ISO 14001
Capability
• PCB Type :
Rigid, Rigid-Flex, Flex, Multi-Flex,
Metal Core, Heavy Copper
• Layer Count : Single Sided, Double Sided,
Multilayer up to 30 layers
• Material :
CEM, FR4 (Tg 135℃ to 175℃),
Kapton, Rogers, Teflon
• Min / Max PCB Thickness : 0.25mm / 6.50mm
• Max Copper Weight : 10 oz (finished)
• Min Track / Spacing : 0.1mm
• Smallest Hole Size Mechanical / Laser : 0.13mm / 0.09mm
Capability
• Aspect Ration : 8 to 1
• Finish : immersion gold, hard gold, soft gold,
lead free HAL, Entek (OSP), RoHS Compliant
• Optional Finish : peelable solder mask, carbon ink
• Control Impedance : Single or Differential
• HDI (High Density Interconnection) PCB
• Sequential Lamination (BVH / IVH)
• Blind Via, Buried Via, Via in Pad
Application
•
•
•
•
•
•
•
•
•
•
Industrial Control
Telecommunication : Backplane, Wireless, RF
Optical Device
Thermal Conductivity / Enhanced
Consumer Electronics
PC and Peripheral
High Current Power Device
Chip on Board
Emboss Circuit
Interposer Connection
Advantage
• Sourcing from a number of fully accredited professional PCB
manufacturers
• 5 to 10 days quick turn prototype and small pilot run
• 2 to 3 weeks fast delivery for production order
• Low NRE / MOQ and fast time to market
• Competitive price from Asian manufacturers
• Consistent technology innovation
• Reliable quality with product warranty
• Continuous Quality Improvement
• Climate control local stocking facility
• 24 hours communication and engineering support
• Frequent on-site inspection by our employee
Quality Specification
•
•
•
•
•
•
•
•
•
Design Rule Check for Manufacturability
Hole Wall Roughness Control
Chemical Analysis with SPC / SQC Control Plan
Electrical testing
Cross-section analysis
Optical and Visual inspection
Solderability and thermal stress analysis
IPC-A-600G, IPC-6012B
IPC Class II, Class III or customer specifications