Transcript DCSS Voicemail - Douglas County School District

CISCO IP Phones
To Initially Set up Voicemail
1.
From an IP phone within the system,
dial the last 4 digits of your voice mail
number.
 For example, if your voice mail number is
770-651-9999, you would enter 9999.
 From a regular phone or cell phone dial your
entire 10 digit number.
2.
When the message begins,
immediately press the * (star) key.
To Initially Set up Voicemail
The system will ask for your ID followed by
the #.
3.

Your ID is the last 4 digits of your voicemail
number.
The system will then ask for your
password.
4.

For the first time only, enter the default
password you are given by your office
manager. ** You will change this password to
something that you can remember during the
setup process. Your new password must be
between 6 and 19 digits.
To Initially Set up Voicemail
•
6.
After the voice mail is set up, use your
new password.
The system will welcome you to
Cisco Unity Messaging Center and
will talk you through setting up your
voice mail.
Checking Voicemail
Check voicemail following the first four
steps you used to set up voicemail.




From an IP phone, dial the last 4 digits of
your voicemail number. (From an outside
phone or cell phone, dial the full 10 digits)
Press the * (star) key when your message
begins.
Enter your ID (last 4) and # (pound) when
prompted.
Checking Voicemail


Once you are in the voicemail system,
you may listen to and manage your
messages.
You may also press 4 to enter the setup
menu to change your outgoing
message, set up an alternate greeting
or change your password.
More information

Click to view a tutorial about using the
CISCO 7940 IP Phone.

Click to view a tutorial about using the
CISCO 7960 IP Phone.