Transcript Climate Adaptive Building Shells (CABS)

Introduction to
Building and
Renewable Energy
Modeling
7NBB1 - Basic Design Integral Design Project
3 February 2014
Pieter-Jan Hoes
Integral Design Project - Assignment
► Design a new exhibition center for the TU/e
► Location: De Hal (old library)
► Take energy demand and electricity production into account
during design process
► Step 1: Make (initial) building design
► Step 2: Assess building performance (gas consumption,
electricity consumption, CO2 emissions)
► Step 3: Design electricity production system (PV, wind)
► Step 4: iterate
/ Building Physics and Services
6-9-2013
PAGE 1
Integral Design Project - Assignment
► Step 1: Implement your design - Revit
• Geometry
• No systems information
► Step 2: Calculate building performance - Green Building Studio (GBS)
• Outputs of Revit design are inputs for webtool
• Creates systems simulation based on inputs and/or defaults
• Outputs performance details and metrics
► Step 3: Design electricity production system - Homer
• Electricity needs of building output from GBS are Homer inputs
• Economic analysis of renewable & combined energy systems
/ Building Physics and Services
6-9-2013
PAGE 2
Integral Design Project - Assignment
Step 1: Geometry
Revit
/ Building Physics and Services
Step 2: Performance
Green Building Studio
Step 3: Renewables
Homer
17-7-2015
PAGE 3
Introduction to
Building and
Renewable Energy
Modeling
7NBB1 - Basic Design Integral Design Project