2N StarGate - Avalon
Download
Report
Transcript 2N StarGate - Avalon
2N StarGate
PRI GSM Gateway
2N StarGate
32 GSM channels
Up to 256 SIM cards
Least cost routing
Incoming and outgoing calls routing
Optional VoIP support
Optional 3G support
2N StarGate
Over 500,000 minutes/month
Not PC based – high stability
Compact design and size (3U)
Hot swappable GSM boards
Front access to boards
Only 2 antennas (1 for 16 channels)
SMS sending/receiving
How does the GSM
Gateway work
How does the GSM
Gateway work
GSM Gateway is a device for direct routing of GSM calls through its
GSM modules into GSM network. Otherwise, routing of these calls
through PSTN network to the GSM network would be much more
costly.
While using GSM gateway, there is no interconnect fee besides bills
from SIM cards, which are used in GSM Gateway.
The calls may originate in company’s PBX, in alternative carriers
networks etc. E1 or VoIP connection to 2N StarGate is supported.
Recommended
settings at ISDN side
* EuroISDN interface
(Q.931 EDDS1)
** If you set 2N StarGate
as NT(MASTER), set
switch as TE (SLAVE)
Port:
Synchronization:
TEI:
E1
*
NT**
MASTER
0
Port:
Synchronization:
TEI:
TE**
SLAVE
0
The GSM side
Outgoing calls
8 independent outgoing GSM
groups
CLIP/CLIR features
possibility for limitation of
minutes
Rotating of SIMs by
time/random/limit
Incoming calls
4 independent incoming GSM
groups
possibility to
REJECT/IGNORE incoming
calls
present with DISA
message/dialling tone
passing to switch/VoIP
gateway
GSM
network 1
GSM
network 2
GSM
network 3
Outgoing calls
settings
1. Assign GSM Modules to GSM groups
2. Configure every GSM Group separately
3. Create network lists
(one for each GSM network)
4. Define LCR
•• LCR
Every
single
GSM
Modulealgorithm
may
beprefixes,
assigned
to one
group
and
one
incoming
group.
Incoming
Every
(Least
Network
set
ofCost
GSM
list
Routing)
Modules
contains
(creating
list of
assigns
GSM Group)
which
GSM
will
Groups
isoutgoing
configured
be routed
to Network
together
separately.
lists
with
together
Configuration
the same
with
rules.
time
include
dependency.
Usually
CLIP/CLIR
a and
Network
In
outgoing
groups
are
two
different
sets
ofGSM
groups.
options,
list
other
corresponds
words
times
it says,
ofwith
usage,
through
all prefixes
minutes
which
for
limit
GSM
one
etc.
Modules
Network.
will be calls routed (according to its prefix).
Data records about
traffic
CDR (Call Data Records)
•
2N StarGate automatically saves information about every call into its memory (even
unsuccessful calls if needed). With latest CPU board you have space for up to 245
thousand lines. In CDR you will find data about every call, which has been connected
through 2N StarGate
Statistics
•
2N StarGate automatically generates detailed statistics data on all incoming and
outgoing calls.. In Statistics you will find data about number of minutes routed through
every GSM module, GSM Group
CDR (Call Data Records)
Example of one line in CDR file
** 31.07.02/11:07:53 O-OK CAU-016 aux/g02 GRP-1 0:23 001:40 00000.00 0608218005 45456060 1/8942019636000065750
•
•
•
•
•
•
•
•
1. column: **
2. column: date/time of start of the call
3. column: type of call
-I-FD : Unconnected attempt of incoming call (It
will be implemented at higher version of the
firmware)
-I-OK : Successfully connected incoming call (It
will be implemented at higher version of the
firmware)
-O-FD : Unconnected attempt of outgoing call
-O-OK : Successfully connected outgoing call
4. column: CAUSE sent to ISDN
5. column: number of used B-channel/number of used
GSM module
6. column: used GSM group
7. column: time of establishing call
8. column: duration of call mmm:ss (max. 255:59) or
error cause for unconnected calls
8. column: costs of the call (will be implemented in
higher version of firmware)
9. column: called number
10. column: caller number
11. column: number of slot/IMSI* of used SIM card
*with GSM modules GM22(47) IMSI is presented, with TC35 GSM modules serial number of SIM
card is presented
Easy remote control
2N STARGATE can be configured and supervised (remotely or locally) using
the following connections:
locally via an RS232 interface
ISDN (or analogue) modem connected to an RS232 interface. An automatic detection
of the modem connection and thus automatic modem configuration are a matter of
course
10baseT interface - TELNET
Inbound B-channel in PRI ISDN connection
Other 2N PRI GSM
Gateways
2N BlueTower
2N BlueStar
2N BlueTower
Up to 8 GSM channels
– scalable capacity
Up to 2 PRI ISDN ports
Internal or external antenna
splitter
Comfortable remote control and
maintenance
2N BlueStar
• Up to 16 GSM channels
• Connection to your PBX
via PRI ISDN (2x)
• VoIP interface
• Internal antenna splitter
Thank you for your
attention