Transcript CNC 8055 T - Fagor Automation

CNC FAGOR 8055 T
Fagor Automation
FAGOR 8055 T CNC
exit
home
CNC FAGOR 8055 T
Fagor Automation
Lathes
Turning Centers
Up to 7 axes
Up to 2 spindles
Up to 2 Gb of memory
75-block look-ahead
Sectors
·
·
·
Aerospace
Automotive
Renewable energies
- Wind energy
- Photovoltaic
· Etc.
exit
home
CNC FAGOR 8055 T
Fagor Automation
General characteristics
· Easy to operate
· Programming in ISO & FAGOR's conversational
language
· Tool Inspection
· Integral thread management
· Tool calibration cycles
· Measuring cycles
· "C" axis related automatic operations
· Editing and simulation
· Intelligent profile editor
exit
home
CNC FAGOR 8055 T
Fagor Automation
Available models
8055 CNC configuration
Central unit
Color monitor + keyboard
8055i CNC configuration
Central unit
+ Monitor (color & monochrome)
+ Keyboard
exit
home
CNC FAGOR 8055 T
Fagor Automation
Easy to operate
FAGOR pioneered the conversational language
By transforming the programming method because it lets you program without any ISO programming
knowledge.
1
Taper turning
Facing
Turning
(1/2)
exit
home
CNC FAGOR 8055 T
Fagor Automation
Easy to operate
2
1
3
Rounding
Slot milling
2
4
3
4
Profiling
Threading
(2/2)
exit
home
CNC FAGOR 8055 T
Fagor Automation
Programming in ISO & FAGOR's conversational language
The operator can select anytime the programming format that better
suits his needs.
ISO programming
Conversational programming
Conversational and in ISO coded at the same time
Convert conversational programs into ISO code
exit
home
CNC FAGOR 8055 T
Fagor Automation
Tool Inspection
It makes the operator's job easier
After interrupting the program, the operator can check the tool status, replace it if necessary and
resume the execution of the program.
3
Changes the tool
4
2
Returns
Returns
1
5
Stops
Resumes
exit
home
CNC FAGOR 8055 T
Fagor Automation
Integral thread management
All kinds of threads may be carried out
Standard, longitudinal, taper, on the face, with variable pitch, etc. Multiple-entry (multi-start) threads
can also be defined.
The thread repair function is ideal for restoring parts having worn out threads.
exit
home
CNC FAGOR 8055 T
Fagor Automation
Tool calibration cycles
It makes the operator's job easier during setup.
Tool calibration is available in jog and automatic modes
exit
home
CNC FAGOR 8055 T
Fagor Automation
Measuring cycles
They allow measuring the parts or correct tool wear
Automatic tool calibration provides shorter machining time
by eliminating idle time and manual calibrating operations.
exit
home
CNC FAGOR 8055 T
Fagor Automation
"C" axis related automatic operations
For machining on the face or on the cylindrical surface of the part.
In both cases, the profile is defined using the profile editor and it allows selecting the type of tool
compensation using an icon.
exit
home
CNC FAGOR 8055 T
Fagor Automation
Editing and simulation
Edit the new program while executing another one.
It is possible to edit part-programs while
executing another program reducing waiting
time between parts.
Simulating the program graphically before
machining the part permits verifying each
operation and correct the data entered.
exit
home
CNC FAGOR 8055 T
Fagor Automation
Intelligent profile editor
Just enter the known data from the blueprint.
With the intelligent profile editor no calculations are required, just enter the known data from the
blueprint into the CNC.
When there are more than one solution, all possible solutions are shown graphically so the operator
can select the right one.
exit
home
CNC FAGOR 8055 T
Fagor Automation
Main characteristics
· Up to 7 axes, 2 spindles and 3 electronic handwheels
· Solid-state disk of 2GB.
· Digital and analog servo system
· USB for program backup
· Ethernet connection and Telediagnosis
· ISO and FAGOR's conversational language
· Access to part-program via Windows Explorer type browser
· Full Back-up / Restore in a single operation
· Spindle synchronization in speed and position
· 2D profiling cycles in C axis and Y axis.
· Memorizing the last 10 MDI instructions
· PLC monitoring in ladder (contacts) mode
· Languages: English, Spanish, Basque, Portuguese, French,
Italian, German, Dutch, Czech, Polish, Russian, Chinese
exit
home
CNC FAGOR 8055 T
Fagor Automation
FKM
FXM
ETHERNET
Axis motor
USB
FM7
SERCOS
Spindle motor
CAN
CAN OPEN
Remote modules
Drive
AXD / SPD
Feedback Systems
exit
home
CNC FAGOR 8055 T
Fagor Automation
Additional information
FKM
FXM
ETHERNET
Axis motor
USB
FM7
SERCOS
Spindle motor
CAN
CAN OPEN
Remote modules
Drive
AXD / SPD
Feedback Systems
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
CNC 8055 T
General characteristics 8055 CNC
General characteristics 8055i CNC
Most relevant features
Setup assistance
Most relevant functions
Machining canned cycles
Probing canned cycles
Educational
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055 CNC
CONFIGURATION
CNC 8055 /A
CNC 8055 PLUS
Axes and spindles
4 (optional)
2
4 (optional)
7 (optional)
Spindles
2
2
C axis
(-)
With 4 and 7 axes (optional)
Maximum Axis + Spindle configuration
5
8
Gantry axes
Standard
Standard
Tandem axes
Only with Sercos digital
Only with Sercos digital
Axis coupling via PLC
Standard
Standard
Axis coupling via program
Standard
Standard
RAM memory
256 KB - 1MB(optional)
1MB
KEYCF Flash memory
512 MB - 2GB(optional)
512 MB - 2GB(optional)
Axes
2
User RAM memory
(1/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055 CNC
CONFIGURATION
CNC 8055 /A
CNC 8055 PLUS
Integrated PLC
3 ms / 1,000 instruc.
Cycle time of the PLC
3 ms / 1,000 instruc.
1 ms / 1,000 instruc.
(optional)
1 ms / 1,000 instruc. (optional)
Direct programming in mnemonics
Standard
Standard
Logic analyzer
Standard
Standard
RS 232 up to 115.200 Bd
Standard
Standard
RS422
Standard
Standard
DNC (DNC communication)
Standard
Standard
(-)
(-)
Ethernet
Option
Option
Telediagnosis
Option
Option
Communication
USB
(2/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055 CNC
CONFIGURATION
CNC 8055 /A
CNC 8055 PLUS
Look-ahead.
75 blocks
75 blocks
Jerk control
Standard
Standard
Feed Forward / AC Forward
Standard
Standard
Oscilloscope function (setup assistance)
Standard
Standard
Circularity test (setup assistance)
Standard
Standard
Possible nodes (Can Open)
(-)
(-)
Possible inputs / outputs in each node (500mA)
(-)
(-)
Universal AC
Universal AC
24 V DC
24 V DC
(-)
(-)
Axis adjustment
Remote I/O modules (option)
System voltage supply
Central Unit
Digital inputs and outputs
Remote I/O modules
(3/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055 CNC
CONFIGURATION
CNC 8055 /A
CNC 8055 PLUS
System architecture
Hardware configuration.
Monitor
Feedback inputs
Analog outputs (10V)
Modular central unit
10.4" Color VGA TFT LCD
8 feedback inputs for axes,
spindles and handwheels
8 analog outputs for axes and
spindles
Analog inputs (5V)
8
2 probe inputs, 5V (0.25mA) or 24V (0.30 mA)
1
Local digital inputs and outputs (150 mA)
40 I / 24 O – 232 I / 120 O (optional)
CPU turbo
Option
CAN card for connection to modules
Option
CAN card for digital connection with the drives
Option
SERCOS cards for digital connection with the drives
Option
(4/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055 CNC
CONFIGURATION
CNC 8055 /A
CNC 8055 PLUS
Feedback inputs
For axes
For spindles
4 TTL/1Vpp inputs
4 TTL inputs
For handwheels
(5/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055i CNC
CONFIGURATION
CNC 8055i /A
CNC 8055i PLUS
Axes and spindles
Axes
2
4 (optional)
7 with digital interface
(optional)
2
4 (optional)
Spindles
2
2
C axis
(-)
With 4 and 7 axes (optional)
Maximum Axis + Spindle configuration
5
8
Gantry axes
Standard
Standard
Tandem axes
Only with Sercos digital
Only with Sercos digital
Axis coupling via PLC
Standard
Standard
Axis coupling via program
Standard
Standard
RAM memory
256 KB - 1MB(optional)
1MB
KEYCF Flash memory
512 MB - 2GB(optional)
512 MB - 2GB(optional)
User RAM memory
(1/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055i CNC
CONFIGURATION
CNC 8055i /A
CNC 8055i PLUS
Integrated PLC
3 ms / 1,000 instruc.
Cycle time of the PLC
3 ms / 1,000 instruc.
1 ms / 1,000 instruc.
(optional)
1 ms / 1,000 instruc. (optional)
Direct programming in mnemonics
Standard
Standard
Logic analyzer
Standard
Standard
Standard
Standard
(-)
(-)
DNC (DNC communication)
Standard
Standard
USB
Standard
Standard
Ethernet
Option
Option
Telediagnosis
Option
Option
Communication
RS 232 up to 115.200 Bd
RS422
(2/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055i CNC
CONFIGURATION
CNC 8055i /A
CNC 8055i PLUS
Look-ahead.
75 blocks
75 blocks
Jerk control
Standard
Standard
Feed Forward / AC Forward
Standard
Standard
Oscilloscope function (setup assistance)
Standard
Standard
Circularity test (setup assistance)
Standard
Standard
4
4
72 I / 48 O
72 I / 48 O
Central Unit
24 V DC
24 V DC
Digital inputs and outputs
24 V DC
24 V DC
Remote I/O modules
24 V DC
24 V DC
Axis adjustment
Remote I/O modules (option)
Possible nodes (Can Open)
Possible inputs / outputs in each node (500mA)
System voltage supply
(3/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055i CNC
CONFIGURATION
CNC 8055i /A
CNC 8055i PLUS
System architecture
Hardware configuration.
Monitor
Feedback inputs
Analog outputs (10V)
Central unit integrated into the monitor
10.4" Color TFT LCD (optional)
10.4" Monochrome TFT LCD (optional)
1 specific for spindles
2 specific for electronic handwheels
4 for axes, spindles or handwheels (optional)
1 specific for spindle
Analog inputs (5V)
(-)
2 probe inputs, 5V (0.25mA) or 24V (0.30 mA)
2
Local digital inputs and outputs (150 mA)
16 I / 8 O – 56 I / 32 O (optional)
(-)
CPU turbo
CAN card for connection to modules
Option
CAN card for digital connection with the drives
Option
SERCOS cards for digital connection with the drives
Option
exit
(4/5)
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > General characteristics 8055i CNC
CONFIGURATION
CNC 8055i /A
CNC 8055i PLUS
Feedback inputs
For axes
4 TTL/1Vpp inputs (optional)
For spindles
1TTL
For handwheels
2 TTL
(5/5)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Most relevant features
· Programming in ISO and FAGOR's conversational language.
· Editing and executing from KEYCF also in conversational mode
· Conversational interface for vertical lathes
· Full Back-up / Restore in a single operation
· Tool measuring-calibrating cycles
· 2D profiling cycles in C axis and Y axis.
· Threads with several starts
· Thread execution interruption with tool exit.
· Variable-pitch threads
· Memorizing the last 10 MDI instructions
· PLC monitoring in ladder (contacts) mode
· Profile editor: Incremental / Abs, Cartesian / Polar
· Encrypted OEM programs
· Spindle synchronization in speed and position
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Setup assistance
Oscilloscope function
It is a tool to assist you when adjusting the
axes.
Up to 4 variables may be shown simultaneously
and manipulate machine parameters and
variables of the CNC, PLC and drive
Circularity test
It helps improve the axis reversal peak.
It consists in machining a circle, graphically
compare the theoretical path with the actual path
and manipulate machine parameters until the
desired result is achieved.
exit
home
(1/2)
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Setup assistance
Logic PLC analyzer
Tool to assist you when adjusting the PLC program.
It captures data at the beginning of each PLC cycle and
shows the status of the requested resources.
exit
(2/2)
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Most relevant functions
CNC 8055 i /A
CNC 8055 / A
FEATURES
CNC 8055 i PLUS
CNC 8055 PLUS
T
TC
T
TC
Spindle orientation M19
Standard
Standard
Standard
Standard
Spindle synchronization
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Tangential control
Option
Option
Option
Option
Retrace
Option
Option
Option
Option
C axis
(-)
(-)
Option
Option
Y axis
(-)
(-)
Option
Option
Spindle related
Interpolation
Linear, Circular, Helical
(1/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Most relevant functions
CNC 8055 i /A
CNC 8055 / A
FEATURES
CNC 8055 i PLUS
CNC 8055 PLUS
T
TC
T
TC
GP compensation
Standard
Standard
Standard
Standard
Tool geometry
Standard
Standard
Standard
Standard
Option
Option
Option
Option
Tool path
Standard
Standard
Standard
Standard
Solid graphics
Standard
Standard
Standard
Standard
Simulation with execution time estimate
Standard
Standard
Standard
Standard
Look-ahead of N blocks to avoid tool collision
Standard
Standard
Standard
Standard
Compensations
Tool life monitoring
Graphics
Operation related
(2/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Most relevant functions
CNC 8055 i /A
CNC 8055 / A
FEATURES
CNC 8055 i PLUS
CNC 8055 PLUS
T
TC
T
TC
Feedrate as an inverted function of time
Standard
Standard
Standard
Standard
Profile editor
Standard
Standard
Standard
Standard
Option
Option
Option
Option
Standard
Standard
Standard
Standard
Option
Option
Option
Option
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Option
Option
Option
Option
Standard
Standard
Standard
Standard
Programming related functions
Communications related functions
Ethernet
DNC
Telediagnosis
Setup assistance
Canned cycles
Machining canned cycles
Probing canned cycles
Rigid tapping
(3/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles
Turning, facing, rounding
Longitudinal threads and with
several starts (entries).
Thread repair
Grooving with and without inclined
walls
Cut-off
Profiles
(1/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles
Multiple drilling and tapping
Profiles associated with the "C" axis
Multiple slot milling
Rectangular and circular pockets associated with the C axis
exit
home
(2/19)
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
ISO cycles
8055 T CNC > Machining canned cycles
G60 Drilling / threading on the face of the part
G61 Drilling / threading on the side of the part
G62 Slot milling on the side of the part
G63 Slot milling on the face of the part
G66 Pattern repeat
G68 Roughing along the X axis
G69 Roughing along the Z axis
G81 Turning of straight sections
G82 Facing of straight sections
G83 Axial drilling / tapping
G84 Turning of arcs
G85 Facing of arcs
G86 Longitudinal threading
G87 Face threading
G88 Grooving along the X axis
G89 Grooving along the Z axis
(3/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles > Drilling / threading on the face of the part
G60. Drilling / threading on the face of the part
This cycle is available when the machine has a live tool.
It allows axial drilling or tapping. While drilling or threading, the spoindle is stopped and the tool is turning;
therefore, machining is possible anywhere on the part.
(4/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles > Drilling / threading on the side of the part
G61. Drilling / threading on the side of the part
This cycle is available when the machine has a live tool.
While drilling or threading, the spindle is stopped and the tool is turning; therefore, machining is possible
anywhere on the part.
(5/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Slot milling on the side of the part
G62. Slot milling canned cycle along the side of the part
This cycle is available when the machine has a live tool.
While milling a slot, the spindle is stopped and the tool is turning; therefore, machining is possible anywhere
on the part.
(6/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Slot milling on the face of the part
G63. Slot milling canned cycle on the face of the part
This cycle is available when the machine has a live tool.
While milling a slot, the spindle is stopped and the tool is turning; therefore, machining is possible anywhere
on the part.
(7/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Pattern repeat
G66. Pattern repeat cycle
It macines the programmed profile, maintaining the indicated pass between successive machining passes.
The cycle allows using triangular, round and square tools.
(8/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Roughing along the X axis
G68. Roughing canned cycle along the X axis
It machines the programmed profile, maintaining the indicated pass between successive machining passes.
The cycle allows using triangular, round and square tools.
(9/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Roughing along the Z axis
G69. Roughing canned cycle along the Z axis
This cycle machines the programmed profile, maintaining the indicated pass between successive machining
passes. The cycle allows using triangular, round and square tools.
(10/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Turning of straight sections
G81. Canned cycle for turning straight sections
It turns the programmed section, maintaining the indicated pass between successive turning passes. The
cycle allows selecting whether or not it will run a finishing pass after the programmed turning operation.
(11/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Facing of straight sections
G82. Canned cycle for facing straight sections
It faces the programmed section, maintaining the indicated pass between successive facing passes. The
cycle allows selecting whether or not it will run a finishing pass after the programmed facing operation.
(12/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Axial drilling / tapping
G83. Axial drilling / tapping canned cycle
It allows axial drilling or tapping. The execution of one or the other operation depends on the programming
format being used. When setting parameter "B=0", it does an axial tapping and when setting "B>0" it does
an axial drilling.
(13/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Turning of arcs
G84. Canned cycle for turning curved sections
It turns the programmed section, maintaining the indicated pass between successive turning passes. The
cycle allows selecting whether or not it will run a finishing pass after the programmed turning operation.
(14/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Facing of arcs
G85. Canned cycle for facing curved sections
It faces the programmed section, maintaining the indicated pass between successive facing passes. The
cycle allows selecting whether or not it will run a finishing pass after the programmed facing operation.
(15/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Longitudinal threading
G86. Longitudinal threading canned cycle
This cycle may be used to cut external or internal threads with a constant pitch on taper or cylidrical parts.
Right-hand or left-hand threads are programmed indicating the spindle turning direction M03 or M04.
(16/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Face threading
G87. Face threading canned cycle
It may be used to cut external or internal threads with constant face pitch. Right-hand or left-hand threads
are programmed indicating the spindle turning direction M03 or M04.
(17/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Grooving along the X axis
G88. Grooving canned cycle along the X axis
It grooves along the X axis maintaining the same pass between the successive passes; this pass will be the
same or smaller than the one programmed.
(18/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Machining canned cycles >
Grooving along the Z axis
G89. Grooving canned cycle along the Z axis
It grooves along the Z axis maintaining the same pass between the successive passes; this pass will be the
same or smaller than the one programmed.
(19/19)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Probing canned cycles
· Tool calibration
· Probe calibration
· Part measuring and tool correction along the X axis
· Part measuring and tool correction along the Z axis
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Educational
Especially designed for:
• Technical training of programmers and operators in training centers.
• Commercial promotion of the 8055 CNC at distributors and service
centers.
With the full potential of the 8055i CNC
• It is operated like a CNC installed on a machine.
• It allows operating in Mill mode and Lathe mode
· Mill (white background)
· Lathe (blue background)
• Work modes like conventional (ISO), Fagor conversational, profile
editor, etc.
• It offers all the software options of the 8055i CNC
• It is designed for editing and simulating part-programs, customizing
the CNC and setting its parameters, etc.
(1/2)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
8055 T CNC > Educational
Portable
Ethernet
With integrated universal power
supply
USB
RS232 serial line
(2/2)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives
Modular servo drive system
It is configured with power supply modules that may be connected directly to mains
and with specific drive modules to govern axis and spindle motors.
Power supplies
Axis drives (AXD)
Spindle drives (SPD)
Compact servo drive system
Independent drive with integrated power supply. They may be connected
directly to mains.
Axis drives (ACD)
Axis drives (MCS, ACSD)
Spindle drives (SCD)
(1/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives > Modular servo drive system >
Power supplies
Power supplies
For modular systems, there are non-regenerative power supplies and regenerative power supplies that return energy to
mains.
PS
Non-regenerative power supply (it does not return energy to mains).
XPS Regenerative power supply (it returns energy to mains).
RPS Regulated regenerative power supply
RPS power supplies
· They are regulated regenerative power supplies.
· For servo systems with high dynamic demand and for machines with frequent cycles that consume high braking energy.
· They regulate the DC voltage of the internal bus.
· They return the excess braking energy
· They optimize heat dissipation.
(2/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives > Modular servo drive system >
Power supplies
(3/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives > Modular servo drive system >
AXD and SPD drives
(4/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives > Compact servo drive system >
ACD and SCD drives
(5/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Servo drives > Compact servo drive system >
MCS and ACSD drives
(6/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Axis motors
FKM motors
FXM motors
Synchronous AC motors
BRAKE and FAN options
High reliability, long life span of bearings
Wide product range
· Stall torque from 1.7 Nm to 76.6 Nm.
· Speed: 3000, 4000, 4500 and 6000 rpm.
(1/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Axis motors >
FKM motors
(2/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Axis motors >
FXM motors
(3/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Spindle motors
FM7 motors
High speed asynchronous motors
Small
Balanced for high speed.
Low noise and vibration
High reliability, long life span of bearings
Power from 3.7 Kw to 60 Kw.
Minimum acceleration and deceleration time
Wide product range
FM7 E01 Speeds of up to 9,000 rpm.
FM7 E03 Speeds of up to 15,000 rpm. Dual winding, Y/Delta (star/triangle)
FM7 HS3 Speeds of up to 15,000 rpm. Dual winding. Direct drive with a hole in the shaft for tool
cooling
(1/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Spindle motors >
FM7 E01
(2/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Spindle motors >
FM7 E03 and FM7 HS3
(3/3)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Remote modules
RIO5 series
Modules that are easy to install, they are mounted at strategic
points of the machine for having extra inputs and outputs
distributed next to each device.
They are distributed in groups and are connected to the central
unit through the CAN OPEN bus.
They are used to control analog and digital inputs and outputs.
RIOW series
They minimize the number of cables and components used in the
electrical cabinet.
Configuration program
(1/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Remote modules >
RIO5 series
RIO5 series
RIO5 PS-24I/16O
Header module with power supply, 24 digital inputs and 16 digital
outputs
RIO5 PS-2PT100/4AI/4AO
Header module with 4 analog inputs, 4 analog outputs and 2 inputs
for PT100 temperature gages
RIO5 24I/16O EXP MOD
Expansion module with 24 digital inputs and 16 digital outputs
RIO5 48I/32O EXP MOD
Expansion module with 48 digital inputs and 32 digital outputs
(2/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
RIO5 series
Remote modules >
RIO5 series
Electrical characteristics
Inputs
24 V DC, 7 mA per input
Outputs
24 V DC, 500 mA per output
Analog inputs
±10 V, 12-bit resolution
Analog outputs
±10 V, 16-bit resolution
Inputs for PT100 temperature gages
Between -200 ºC (-328 ºF) and +850 ºC (1562 ºF) Resolution: 0.1 ºC
Typical consumption per input. 2 mA.
(3/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
RIO5 series
Remote modules >
RIO5 series
Possible configurations
RIO5 PS-24I/16O / RIO5 PS-2PT100/4AI/4AO
RIO5 PS-24I/16O / RIO5 PS-2PT100/4AI/4AO
RIO5 24I/16O EXP MOD
RIO5 PS-24I/16O / RIO5 PS-2PT100/4AI/4AO
RIO5 48I/32O EXP MOD
exit
home
(4/6)
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Remote modules >
RIOW series
RIOW series
RIOW CANOPEN-51205056
Header module CANopen
RIOW 8DI-51205053
Expansion module with 8 digital inputs
RIOW 8DO-51205043
Expansion module with 8 digital outputs
RIOW 4AI-51205050
Expansion module with 4 analog inputs
RIOW 4AO-51205039
Expansion module with 4 analog outputs
RIOW 2AI PT100-51205048
Expansion module with 2 inputs for PT100 temperature gages
RIOW PS24-51205036
24 V DC 10 A power supply for the modules
65
RIOW END-51205037
Line terminating module. It must be present in all the configurations.
(5/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
RIOW series
Remote modules >
RIOW series
Electrical characteristics
Inputs
24 V DC, 3 mA per input
Outputs
24 V DC, 500 mA per output
Analog inputs
±10 V, 12-bit resolution
Analog outputs
±10 V, 12-bit resolution
Inputs for PT100 temperature gages.
Between -200 ºC (-328 ºF) and +850 ºC (1562 ºF) Resolution: 0.1 ºC
Typical consumption per input. 2 mA.
(6/6)
exit
home
CNC FAGOR 8055 T
Fagor Automation
FAGOR system >
Feedback Systems
Fagor absolute feedback:
Controlled position right from power-up
High resolution rotary encoders:
S-90.000-1024 D90 with dual track.
exit
home