Transcript WFC 10 - Tos America Inc.
WFC 10 CNC
The WFC 10 CNC is a new type of the machine, which is built on a sliding guiding
WFC 10 CNC
• is a continuously controlled cross-type machine of the up-to date design, ideal for the powerful complete machining of work pieces up to 5 tons 11 023 lb .
• • • • • V – RAM TRAVEL W – SPINDLE TRAVEL X – TABLE TRAVEL Y – SPINDLEBOX TRAVEL Z – COLUMN TRAVEL
WFC 10
• • The frame of this machine is seated on a firm stand and linked with a bed in the axis X.
Z = 1250 mm, 49.2 In
Z axis
• • • Workpiece motion is performed by a special cross-type machine execution, where the plate of the rotary table is moved along the axes X and Z. 45° Support on linear ways X = 1250 mm, 49.2 In or 2000 mm, 78.74 In
X axis
• • Fixed column Y = 1250 mm, 49.2 In or 1700 mm, 66.9 In
Column
Headstock
• • • • • The headstock is fabricated from a special ductile iron and is driven by an asynchronous servomotor with continuous regulation of revolution W = 730 mm 28.7 In 3000RPM (till 500 mm run out) 2000RPM (500-730 mm) 17kW 22 HP or 22 kW 29.5 HP
Headstock
• • • • Max table load 3 or 5 tons Table dimesions 1000x1120 mm 39.3x44 In 1200x1400 mm 47.2x55.1 In
Table
CNC control system
• • • HEIDENHAIN iTNC 530 or TNC 620 FANUC 31i or 32i 15´´ LCD display
• • •
Low Pressure Cooling (outside coolant)
Coolant Pressure (coolant tank output) 6 bar Max. Delivered Quantity 62 l/min Coolant Tank Capacity 550 l • • •
High Pressure Cooling (through spindle)
Coolant Pressure 20 / 30 / 50 bar Max. Delivered Quantity 25 / 37 / 60 l/min Coolant Tank Capacity 220 l
Coolant
Eletric box
• • The electric equipment is consistent with CE, CSA or UL certifications.
Air conditioned distribution box
• • 20 tools 32 tools
Automatic tool changer
• • • • • • Orthogonal two-axes manual head Power 20kW Speed 2000/min 1:1 gear transfer SK 50 (DIN, MAS, ANSI) Manual tool clamping
OHM 20
• • • • • • Right angle manual head Power 20kW Speed 2000/min 1:1 gear transfer SK 50 (DIN, MAS, ANSI) Manual tool clamping
PHM 20
• • • • • • • UHM 20 Universal manual head Power 20kW Speed 2000/min 1:1 gear transfer SK 50 (DIN, MAS, ANSI) Manual tool clamping
UHM 20
• Belt type
Chip conveyor
Transport and installation
• • Small version fits in One container Fast installation
Layout
Foundation plan
Thank you for your attention
Fermat
www.fermatmachinery.com
+420 774 339 345 [email protected]
Průmyslová 11, 102 00 PRAGUE 10 Czech Republic
Lucas Precision
www.lucasprecision.com
216 451 5588 [email protected]
13020 St. Clair Avenue Cleveland OH 44108-2033