Introducing…

The Industry’s Most Advanced 2 hp Grinder

• • • • • • • • • • •

Summary of Features:

New!

V-SLICE

TM

Cutter Technology Unique, One-piece Cast Motor Housing Epoxy Powder Coated Improved Flow, Open Volute Design Heavy-duty, High-torque Motor Solid State Starting Circuit Quick-disconnect Power Cord Dual Shaft Seals Panel-less Design (single phase) Piggy-back style plug connection (single phase) Stainless Steel Impeller Patent Pending

V-Slice

TM

Cutter Technology

Unmatched shredding ability at a rate of up to 367,200 cuts per minute.

Macerates and shreds jeans, shop rags, sanitary napkins, diapers…

Rotary cutter and plate all made from 440 stainless steel, hardened to Rockwell 58c Exclusion slots – clear debris from behind rotary cutter Recessed nut helps eliminate “wadding” Unique V-SLICE “alternating cut” design for improved shredding over single “round-hole” designs.

Stainless steel clasp for lift-out chain Solid one-piece cast iron housing Solid-state starting circuit Upper and lower ball bearings High-torque 2 hp. motor Upper seal – Silicon Carbide, unitized Lower seal – Viton double lip Improved-flow volute with no cutwater. Helps reduce clogging.

Beefy stainless steel handle with rubber Grip Quick-disconnect cord design Internal capacitor – eliminates expensive control panels Wide-angle switch with piggy-back style plug 300-Series stainless steel rotor shaft 300-Series stainless steel impeller Hardened stainless steel cutter plate with spiral clean-out Hardened stainless steel rotary cutter

LSG202 Performance Curve

U.S. Gallons Per Minute

Omnivore Curve Example of pump with a minimum head requirement Minimum operating head 30’ DANGER ZONE Operating below the required minimum head can overload the motor causing product failure!

Low Head?

Many grinders have a “minimum head” requirement.

What if you have a lower head application?

The Omnivore

TM is engineered to run efficiently at low heads!

Even downhill “negative head” pumping is not a problem for the OMNIVORE!

Typical components of a pre-designed system from Liberty Pumps

Discharge Pipe Waterproof Wiring Box Alarm Guide rail system for easy lift out of pump GR20 disconnect and guide-rail base with ball check valve.

Simplex or Duplex Panels 4” inlet hub QuickTREE TM Adjustable float system allows easy removal of floats for cleaning and service without entering pit.

GR20 Guide Rail Base.

Integrated ball Check valve •

Cast Iron Construction

•

Integrated ball check valve

•

Simple one rail design

•

Auto-position feature assures

•

proper locating

Upper mount for guide rail pipe Pump during lift out “unlocked” Pump in “locked” position

LSG202-RE

Retro-Fit System for E/One® Grinder Packages

A completely assembled grinder replacement package for E/One® GP 200 and GP 2000 systems.

•

Liberty's 2 hp Omnivore Grinder Pump • Assembled and ready to drop-in-place • Includes floats, piping, and replacement cover • Heavy-duty cast iron anti-siphon check valve • Weatherproof Junction Box E/One®

is a registered trademark of Environment One Corporation and is not affiliated with Liberty Pumps.

LSG202-RE

7 ft Drop rope Discharge elbow fits E/One® receptacle / valve Water proof enclosure for splicing existing wires Weighted high water alarm float Cast Iron Anti-siphon check Valve LSG202A Grinder Pump

*E/One is a registered trademark of Environment One Corporation and is not affiliated with Liberty Pumps.

E/One® System

Note: * E/One® Series GP200 and GP2000 pumps are of the progressive cavity design that have the capability to develop higher pressure than centrifugal style grinders, While the LSG202-RE Retro-Fit from Liberty will work in many applications as a direct drop in replacement for E/One®, some installations may exceed the head or pressure capabilities of the LSG202-RE.

*E/One is a registered trademark of Environment One Corporation and is not affiliated with Liberty Pumps.

E/One Curve Omnivore Curve

Liberty offers a wide range of factory pre designed simplex and duplex systems featuring the Omnivore grinder.

Diameter Height 2448LSG 24 24” 48” for easy, error-free installation at the job site. • When you specify a Liberty pre-designed system, you know it is right - the first time.

• Total custom systems are available - consult our technical sales department at 1-800-543-2550!

Hungry by Design.

End.