Specifications:

All Components NSF listed

. Optional CD-10 AD Ozone system Stainless steel multi stage pump Stainless steel membrane housing(s) Product /waste / Recycle flow meters Twin Grundfos 1.0 hp SS dispensing pumps Four big blue final filters two per dispenser line R.O. pump time delay Integrated R.O. Control with TDS monitor 1.5 cu. ft. carbon filter w/ auto backwash Shown with 20 inch BB 5 micron sediment pre-filter Filmtec thin film composite membrane(s) Stainless steel adjustable ball valves Stainless steel liquid filled pressure gauges Twin 15 gallon per minute UV lights Twin dispensing pump allows for higher flow rates and less down time Low pressure pump protection

Available with optional UL listed control box Low tank level pump protection

Consists of two skids. Each 60” L x 30” W x 78” H Overall length 120 inches Skid one has components for pretreatment and production of R.O. water as well as integrated electrical control panel, flow meters, Digital TDS monitor and gauges Skid two has all equipment related to dispensing final filtration and disinfect ion of the final product water. Skid two has two separate dispensing pumps, water lines, final filters that can work independently or together by opening the bypass valve .

Integrated pump control box with isolation switches for UV lights, both pumps, indicator lights low level pump protection and optional ozone pump controls. Dispense pump bypass allows operation of single pump in the event one pump fails to operate or one needs repair.

AWS Permeate Rinse feature flushes R.O. membranes with pure water will in standby position. This helps prevent membrane fouling and eliminates the bad water R.O. membranes emit on start-up.

Model GPD Membrane Motor Dimensions

AWS WS-1 AWS WS-2 AWS WS-3 AWS WS-4 2000 to 2800 4000 to 5400 6000 to 8000 8000 to 10500 4x40 one ea.

4x40 two ea.

4x40 three ea.

4x40 four ea.

1.5 HP 3.0HP

5.0HP

5.0HP

120Lx 30Wx 78H 120Lx 30Wx 78H 138Lx 30Wx 78H 138Lx 30Wx 78H Water feed requirements 1 inch to 11/2 inch minimum 50 psi Electrical requirement Two 20 amp single phase circuits 208 or 230 volts Optional 3 phase version requires One 30 Amp three phase 240 / 480 volts Total weight 1550 lbs. Manufactured by: Advanced Water Systems 25438 N. 17 th Ave. Phoenix, AZ 85085 Distributed by:

Advanced Water Systems

Complete Skid Mounted Water Store

Comes complete with all components necessary to supply purified water to your customers . Includes water storage . Tank(s) not shown

The water station is pre plumbed and pre-wired to minimize installation time. Optional wheels may be added to each skid to make set up and moving a snap. Various size tanks are le depending on space requirements and system size . All components NSF listed or equal .

Stainless

steel fill station

Dual stainless window vending machine