Transcript Tehnični list lepilno tesnilne mase QS – PowerPoint

Lepilno tesnilna masa
Quickseal – Lepilno tesnilna masa
Visoko kvalitetno tesnilno lepilna masa razvita z zadnjo tehnologijo. Quick Seal je kombinacija
tesnenja z odličnimi sposobnostmi lepljenja.
Part Nº:
34501 (QSW) – bela, 290 ml kartuša
34502 (QSG) – siva, 290 ml kartuša
34503 (QSB) – črna, 290 ml kartuša
34453 (QSBR) – rjava, 290 ml kartuša
Lastnosti
Prednosti
- Je brez vonja
- Ne vsebuje topil in isocinatov
- Modificiran polimer
- Visoka razteznost
- Se ne stara in ne poka
- Enostavna aplikacija
- Nanaša se lahko na mokro in suho površino
- Ne prepusti rjavine
- Naredimo lahko originalno tesnjenje
- Kompatibilen z vsemi vodnimi barvami
- Zaščiti kovino
- Prihrani čas
Aplikacija
Okolju prijazno lepilno tesnilna masa, proizvedena za
tesnjenje. Tesni na barvani in surovi kovini, ter
pocinkani površini. Med seboj in tudi en z drugim lepi
in tesni: aluminij, les, steklo in večino plastike,
pleksisteklo, gumo, keramiko, beton, opeko in
poliester.
Pri aplikaciji ne potrebuje prajmerja, površino le
očistimo oziroma razmastimo s KENT Acrysolom.
Material je baziran na osnovi MS polimera, je UV
odporen in ne vsebuje topil in isocinatov.
Namigi & Nasveti
DS10
0095 01
Navodila za uporabo
•
•
•
•
•
•
Očistimo mesto lepljenja z čistilom
Acrysol.
Počakamo, da se mesto čiščenja
popolnoma osuši preden apliciramo QS
Odrežemo vrh kartuše, navijemo
nastavek, ki ga odrežemo na želeno
velikost in vstavimo tako pripravljeno
kartušo v zračno ali ročno pištolo.
Nanesemo QS na želeno mesto.
Višek QS lahko odstranimo s čisto krpo.
Ko se posuši, ga lahko obdelamo
(brusimo) ali po želji pobarvamo.
Lepilno tesnilna masa
Quick seal - Lepilno tesnilna masa
Tehnične informacije
Št. izdelka
34501/34502/34503
Opis:
Lepilno tesnilna masa
Rok uporabe:
Začetni čas sušenja:
8 – 10 min
18 mesecev
Globina sušenja v 1h::
0,75 mm
Prodajan enota:
posamezno
Globina sušenja v 24-ih urah: 3-4 mm(pri 20C˚
Opis nevarnosti:
ni nevaren
VOC:
0 g/l
in 50% vlagi v zraku)
Volumenski skrček:
<1%
Osnovni material:
MS polimer
Koda:
QSW/QSG/QSB
Tarifna št.:
3214 10 10
UV in vremenska odpornost:odlična
MSDS:
Da
Temperaturna odpornost: -40 C˚ do 90 C˚ (+150
Rasteznost:
do 300 %
C˚ v intervalih)
Oblika:
glatka, bela masa, srednje do
Natezna trdnost:
270 N/cm2
visoke viskoznosti
Proizvod
Uporaben z:
Prodajni trg
Acrysol (ABS/SAB)
Primarni
Sekundarni
Varnost in zdravje
Proizvod ne vsebuje nevarnih elementov.
Varnostni list je uporabniku na voljo na zahtevo.
In order to provide you with the most appropriate Personal Protective Equipment when using our products, KENT advises that you follow the
guidelines on the packaging of the product before use. The guidelines are there for your protection and KENT provides a range of Personal
Protection Equipment such as clothing, eye glasses, goggles, face shields and breathing apparatus, complying with the latest European
legislation. If you require further advice then please phone our freephone number and we will be pleased to help you. Telephone: 0800 136925
Terms and Conditions
No part of this publication may be reproduced,
transmitted or stored, electronically, mechanically
or photocopied without the prior permission of
Premier Industrial (UK) Limited.
This data sheet and its contents (the "Information")
belong to the Premier
Farnell Group (the "Group") or are licensed to it.
No licence is granted for the use of it other than for
information purposes in connection with the
products to which it relates. No licence of any
intellectual property rights is granted.
The Information is subject to change without notice and
replaces all data sheets previously supplied. The
Information supplied is believed to be accurate but the
Group assumes no responsibility for its accuracy or
completeness, any error from or omission in it nor for
any use made of it. Users of this data sheet should
check for themselves the Information and the suitability
of the products for their purpose and not make any
assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance
on the Information or use of it (including
AT team d.o.o., Zapuška cesta 63, 1000 Ljubljana
Tel: 01 519 33 33 Fax: 01 518 71 95
E-mail:[email protected] www.at-team.si
liability resulting from negligence or where the Group was aware
of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for
death or personal injury resulting from its negligence KENT is
the tradingname of Premier Industrial (UK) Limited
Registered Office: 36-48 Queen Street, Horsham, West
Sussex RH13 5AD
Registered in England Nº: 1164516
VAT Registration Nº: 169 6803 22
KENT and Premier Industrial are registered trademarks of
Premier Farnell plc or its subsidiaries. All rights reserved.
DS10