Transcript PowerScan™ M8500

PowerScan™ M8500
Industrial Handheld Area Imager Bar Code Reader
with Datalogic’s STAR Cordless System™
Configurazione
Charta/Vivaticket
Enter Reader Configuration
B
Exit and Save Reader Configuration
D
RADIO PARAMETERS
Power-Off Timeout
Power-off timeout

Read 2 numbers in the range 00-99:
00 = Power-off disabled; reader always ready
01-99 = corresponds to a max. 99 hour delay before power-off.
 power-off after 4 hours.
See "Power-Off Timeout" on page 170 for details.
Reader Shut-Down
The following label is a complete command and does not require reading of the Enter and Exit configuration codes.
Transmission Mode
 One Way
Two-ways
C
See "Transmission Mode" on page 171 for details.
126
PowerScan® M8500
\
Enter Reader Configuration
B
Exit and Save Reader Configuration
D
RADIO PARAMETERS
Batch Mode
 disable batch
enable normal batch
enable automatic batch
See "Batch Mode" on page 172 for details.
The following batch management parameters are complete commands
and do not require reading the Enter and Exit configuration codes.
start normal batch transmission
delete batch data
Find Me
disable
C
 enable
See "Find Me" on page 172 for details.
Product Reference Guide
129
Enter Reader Configuration
Exit and Save Reader Configuration
DISPLAY and KEYPAD
PARAMETERS
B
D
Backlight
 backlight off
backlight on
C
Display-Off Timeout
timeout
Read 2 numbers in the range 00-99:
00 = disables display timeout (always on)
01 to 99 = timeout from 1 to 99 seconds.
 display-off after 8 seconds.
 delay disabled
Display Mode
normal
 local echo
clear display after decode
See "Display Mode" on page 173 for details.
132
PowerScan® M8500
\
Enter Reader Configuration
Exit and Save Reader Configuration
B
F
CODE SELECTION
Code 39 Family (continued)
Start-Stop Character Transmission Disabled
Start-Stop Character Transmission Enabled
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEFHFIK
AKCBPJCJGIIJCMCEHKILHLJNPK
AEFBJLBGMHPLMPCGALLLNPBEGK
AAPHBAJIDEEJKEGNNDDELPNDBK
AGLFAIPCDCNEKFGNDNJACOOIIK
DLLLLLLDDDDLLLLDDDDDDLDLLL
APCPCKFMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEDFGIK
AKCBPJCJGIIJCMCEGLLHNECDJK
AEFBJLBGMHPLMIFCPOMHHJKFGK
AAPHBAJICHAOPNMCDOHINHLBHK
AHLFANOLPEOCAPCIJIOMKHJJKK
DLLLLLLDDDDLLLLDLDDDDLDLLL
Code 32 Family
Disabled
Enabled
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJAKEDFEIK
AKCBPJCJGIIJCMCEGPNMPAEJPK
AEFBJLBGMHPKNLEJNCGBMPJFGK
AAPHBAJJCADHJEDNNIKEEBPNHK
AHLFAOJKMFJAIJHEMLKACLHLLK
DLLLLLLDLDLLLLLDDLLDDLDLDL
APCPCKFOBNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKEFHHIK
AKCBPJCJGIIJCMCEHOOAFPPHJK
AEFBJLBGMHPKNMDNCHBNGJCEGK
AAPHBAJJDDHAMNJCDFOICJJPBK
AGLFALIDADKGCDDBGONMKCAKJK
DLLLLLLDLDLLLLLDLLLDDLDLDL
Interleaved 2 of 5 Family
Disabled
Enabled - No Check Digit Control
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALFBGGIK
AKCBPJCJGIIJCMCFHKONPJJDLK
AEFBJLBGMHPKMOFKALIECAOEGK
AAPHBAJJCHEGJKMBDBALLHAHDK
AHKFAMLOPAHAEENBHNCEIKCLIK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALFHEFIK
AKCBPJCJGIIJCMCFGLNBFGCNNK
AEFBJLBGMHPKMJCOPOPIIGFFGK
AAPHBAJJDEABMDGONMEHNPGFFK
AGKFAJKHDGEGOOJENIFIADFKKK
DDLLLLLDLDLLLLLDLLLDDLDLDL
C
Enabled - Check Digit Control and
without Transmission
Enabled - Check Digit Control and
Transmission
APCLGOHMHNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJAKECEHIK
AKCBPJCJGIIJCMCEHNJKNENPJK
AEFBJLBGMHPLNJFKCMGAMKMHGK
AAPHBAJICAEJMGIMIDFGDGJLBK
AFKFAKMEGPHGIDNMAPDIEGKKLK
DDLLLLLDLDLLLLLDDLLDDLDLDL
APCLGOHMHNGNENEIEPANHOGOCK
AHHPEJIMDKEOFMHMLJALEGDGIK
AKCBPJCJGIIJCMCEGINLLPKLPK
AEFBJLBGMHPKMNGDLFDCFOIGGK
AAPHBAJICAHHFJPIPLMCEHELBK
AGLFALLKFHCECKMAJNJAEEMIKK
DDDLLLLDLDLLLLLDDLDDDLDLLL
Code Length Check - Disabled
Code Length Check - Enabled
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMJAMDKEOFMHMLJALEEGGIK
AKCBPJCJGIIJCMCEGJKLCGEBPK
AEFBJLBGMHPKMMGCCBHKGLHGGK
AAPHBAJJDHAGFDMMNGCENDLBFK
AGKFAMJEJIMICGGCNJPAEPFJIK
DLLLLLLDDLLLLLLDLLDDDLDLDL
APCLGOHMFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJALECEFIK
AKCBPJCJGIIJCMCEHIJHIJPPJK
AEFBJLBGMHPKMLBGNEAGMNMHGK
AAPHBAJJCEEBAKGDDLGILLNDDK
AHKFAJINFOPOIMCHHMIMMGCIKK
DLLLLLLDDLLLLLLDDLDDDLDLDL
Minimum Code Length
D
Product Reference Guide
APCLFPFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFCAFIK
AKCBPJCJGIIJCMCEHIJDPBJFLK
AEFBJLBGMHPKNPCINDMAAKPHGK
AAPHBAJICACGOBDLDIAILGNFFK
AHLFANONKLLMECDIFFMKMHALJK
DDDLLLLDDDLLLLLDDDLDDLDLDL
E
es. 001
Read the number in the range
001-255.
107
Setup Procedures
PowerScan® M8500/STAR-System™ Setup
The following procedure allows configuring a PowerScan® M8500 reader to communicate
with various STAR-System™ devices such as STARGATE™ RF base stations.
1.
Restore PowerScan® M8500 Default
2.
Enter Configuration
B
3.
Set Date
+
six digits for Day, Month and Year (DDMMYY)
4.
Set Time
+
four digits for Hour and Minutes (HHMM)
5.
Set the connection according to the length of the codes to be read:
Code Length 240 Characters
C
Code Length >240 Characters
(not for systems with BC-8000 as Master)
Product Reference Guide
43
PowerScan M8500 Setup
6.
Set Radio Address
D + numero palmare 4 cifre
+
four digits from the Numeric Table in the range 0000-1999.
All readers must have different addresses.
7.
First STAR-System™ Address
E + numero base 4 cifre
Read the code above and the four-digit address of the First STAR-System™ device in
the system.
8.
Set Last STAR-System™ Address
Read the code above and the four-digit address of the Last STAR-System™ device in
the system.
Whenever the system is composed of a single base station, the first and
last base station addresses (steps 7 and 8) must have the same value.
9.
Exit and Save Configuration
F
END of procedure.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see "Configuration Parameters" on page 53.
44
PowerScan® M8500
\
Enter Reader Configuration
Exit and Save Reader Configuration
B
D
DATA FORMAT
Header
no header
C
one character header

two character header

three character header

four character header

five character header

six character header

seven character header

eight character header

After selecting one of the desired Header codes, read the character(s) from the HEX table.
Valid characters are in the range 00-FE. For Wedge and USB-KBD interfaces, it is also
possible to read the Special Key(s) described on page "Define Special Key Sequence" on page
161.
Example:
Valid characters are in the range:
00-FE
four character header
Read
+ 41 + 42 + 43 + 44 = Header ABCD
For more details see "Header/Terminator Selection" on page 160 and "Define Special Key
Sequence" on page 161.
Product Reference Guide
89
Enter Reader Configuration
B
Exit and Save Reader Configuration
D
DATA FORMAT
Terminator
no terminator
C
one character terminator

two character terminator

three character terminator

four character terminator

five character terminator

six character terminator

seven character terminator

eight character terminator

After selecting one of the desired Terminator codes, read the character(s) from the HEX
table. Valid characters are in the range 00-FE. For Wedge and USB-KBD interfaces, it is
also possible to read the Special Key(s). See "Define Special Key Sequence" on page 161 for
more information.
Example:
Valid characters are in the range:
00-FE
two character terminator
Read
+ 0D + 0A
= Terminator CR LF
For more details see "Header/Terminator Selection" on page 160 and "Define Special Key
Sequence" on page 161
90
PowerScan® M8500
HEX NUMERIC TABLE
0
1
ANFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHBHIK
AKCBPJCJGIIJCMCFGPOFMJLDJK
AEFBJLBGMHPKNIFGJCGBBDNHGK
AAPHBAJJDEBJCDJAGBDLGHNFHK
AFKEBJJPCPKMAJNAMBKKKCFJKK
DLDLLLDDDLLLLLLDLLDDDLDLLL
ANEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHEEIK
AKCBPJCJGIIJCMCEHPLFIKNHNK
AEFBJLBGMHPKMKGPIEMNLKLEGK
AAPHBAJIDGFBMBLDDDNIEPNNFK
AEKEBJMNMOKOIOPNEFCOIJJLJK
DLDLLLDDLDDLLLLDDDLDDLDLLL
2
ANEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFGHIK
AKCBPJCJGIIJCMCEGMILJPPDNK
AEFBJLBGMHPKMKEKGKAMOGNEGK
AAPHBAJJDEFNLJHLIGJCCKKLDK
AELEBMKKGLEGCCHPLDIKICJLLK
DDLLLLDDDLDLLLLDLLLDDLDLLL
3
4
AMFPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKECHEIK
AKCBPJCJGIIJCMCFGKLNLGILJK
AEFBJLBGMHPLNJDDOKGPBMIGGK
AAPHBAJIDCBNPBJGGNKINPEPFK
AGLEBMONMCIOAPCIABBMOFHJJK
DLLLLLDDLLLLLLLDLLLDDLDLDL
AMFOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEAFHIK
AKCBPJCJGIIJCMCFHJIDKDKPJK
AEFBJLBGMHPLNJBGAEKOEAOGGK
AAPHBAJJDABBIJFONIOCLKDJDK
AGKEBJIKGHGGKDKKPHLIOOHJLK
DDDLLLDDDDLLLLLDDDLDDLDLDL
Product Reference Guide
219
Hex & Numeric Table
5
6
AMEPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFAAEIK
AKCBPJCJGIIJCMCEGJNDOAMLNK
AEFBJLBGMHPLMLCPBCACOJIFGK
AAPHBAJIDCFJGLHNIKABJCDBBK
AHKEBJNIIGGECEIHHDDMMFLLIK
DDDLLLDDLLDLLLLDLLDDDLDLDL
AMEOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCCHIK
AKCBPJCJGIIJCMCEHKONPFOPNK
AEFBJLBGMHPLMLAKPMMDLFOFGK
AAPHBAJJDAFFBDLFDPELPHEHHK
AHLEBMLPCDIMIIAFIFJIMOLLKK
DLLLLLDDDDDLLLLDDDDDDLDLDL
7
ANFNGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFCHFIK
AKCBPJCJGIIJCMCEHJLAGJEHJK
AEFBJLBGMHPKMMHJBODNLMGFGK
AAPHBAJIDFBCOHNDCJGDNMAPDK
AHKEBNOMACIOMCLCEECKCIFKLK
DDLLLLDDDDLLLLLDDLLDDLDLDL
220
8
9
ANFMGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFAFGIK
AKCBPJCJGIIJCMCEGKIOHMGDJK
AEFBJLBGMHPKMMFMPAPMOAAFGK
AAPHBAJJDHBOJPBLJMCJLJHJFK
AHLEBIILKHGGGODALCIOCDFKJK
DLDLLLDDLLLLLLLDLDLDDLDLDL
ANENGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEAAFIK
AKCBPJCJGIIJCMCFHKNODPAHNK
AEFBJLBGMHPKNOGFOGFAEJGGGK
AAPHBAJIDFFGHNDIMOMKJBHBHK
AGLEBINJEGGEOJBNDGAKAIJIKK
DLDLLLDDDDDLLLLDDLDDDLDLDL
PowerScan® M8500
A
B
APCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFABHIK
AKCBPJCJGIIJCMCEHLIFKKKFJK
AEFBJLBGMHPKNMFGFGAOPLOGGK
AAPHBAJJDAECFFJNDGOFJPBHFK
AFKEBKMFNHHIOOPEFNLCMAMLLK
DLLLLLDDLDDLLLLDDLDDDLDLLL
APCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFCDEIK
AKCBPJCJGIIJCMCEGILLLPIBJK
AEFBJLBGMHPKNMHDLIMPKHIGGK
AAPHBAJIDCEOCNFFIDKPPKGBDK
AFLEBPKCHCJAECHGKLBGMLMLJK
DDDLLLDDDLDLLLLDLDDDDLDLLL
C
D
AODPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALFFCHIK
AKCBPJCJGIIJCMCFGOINJGPJNK
AEFBJLBGMHPLMPAKDIKMFNNEGK
AAPHBAJJDEAOGFLIGIJFAPIFFK
AHLEBPOFNLFIGPCBBJIAKMCJLK
DLDLLLDDLLLLLLLDLDDDDLDLDL
AODOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKFHAEIK
AKCBPJCJGIIJCMCFHNLDIDNNNK
AEFBJLBGMHPLMPCPNGGNABLEGK
AAPHBAJIDGACBNHANNNPGKPDDK
AHKEBKICHOLAMDKDOPCEKHCJJK
DDLLLLDDDDLLLLLDDLDDDLDLDL
E
F
AOCPGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJALEHFHIK
AKCBPJCJGIIJCMCEGNODMALJJK
AEFBJLBGMHPLNNBGMAMBKINHGK
AAPHBAJJDEEKPPFDIPDMECPLBK
AGKEBKNAJPLCEEIOGLKAIMOLKK
DDLLLLDDLLDLLLLDLDLDDLDLDL
AOCOGIFKDNGNENEIEPANHOGOCK
AHPNIBAMDKEOFMHMLJAKEFHEIK
AKCBPJCJGIIJCMCEHONNNFJNJK
AEFBJLBGMHPLNNDDCOAAPELHGK
AAPHBAJIDGEGIHJLDKHGCHINHK
AGLEBPLHDKFKOIAMJNAEIHOLIK
DLDLLLDDDDDLLLLDDLLDDLDLDL
Product Reference Guide
221
Reading Parameters
RESTORE
VEDI CONFIGURAZIONE
Product Reference Guide
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
AMHKGPBOFNGNENEIEPANHOGOCK
AHHPMBIMDKEOFMHMLJAKECBEIK
AKCBPJCJGIIJCMCEGNOKAKPHJK
AEFBJLBGMHPKMKEPKAKIOABEGK
AAPHBAJICFGFIBIPPOECDKIJBK
AFKFBMIKBFKGOMKNNGLKGNNIKK
DLLDLDLLDDLLLLLDDLDDDLDLLL
169