Transcript IEEE C802.16m-09/1646

Proposed TGm Plans for Upcoming Sessions & Work Plan Updates
IEEE 802.16 Presentation Submission Template (Rev. 9)
Document Number:
IEEE C802.16m-09/1646
Date Submitted:
2009-07-16
Source:
Jose Puthenkulam
Intel Corporation
Voice:
E-mail:
+1-5032646121
[email protected]
Venue:
San Francisco, CA, USA
Base Contribution:
IEEE 802.16m Work Plan document (IEEE 802.16m-09/0019r1)
Purpose:
For discussion and adoption as guideline for TGm
Notice:
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in
the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an
IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s
sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this
contribution may be made public by IEEE 802.16.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
Outline
• Suggestions for TGm Sessions #63 (Jeju,
Korea) and #63.5 (Hawaii, USA) and #64
(Atlanta, USA)
• Feature Development
• Call for contributions for Session #63.5
• Proposed Updates to the TGm Workplan
(802.16m-09/0019r1)
• Motions
Proposed TGm Plans for Sessions #63, #63.5 and #64
• Call for contributions for feature topics (LBS, E-MBS, Relay, SON)
issued after this meeting
– Contributions deadline for Session #63.5 (Sept 14, 2009)
• If TGm LB#1 initiated after this meeting, based on P802.16m Draft
D1
– Session #63 – Aug 31-Sept 3, Jeju, Korea
• LB #1 Comment resolution based on P802.16m Draft D1
• All comments regarding any Features from CFC will be deferred to Hawaii
• Prepare P802.16m Draft D1a with all resolved comments
– Session #63.5 – Sept 21-24, Hawaii, USA
• Feature DGs meet and prepare AWD text for inclusion in P802.16m Draft
D1a
• All LB#1 comments resolutions finalized
• Generate updated P802.16m Draft D2
• LB recirculation #2 initiated on P802.16m Draft D2
– Session #64 – Nov 16-19, Atlanta, USA
• LB recirculation #2 comment resolution on P802.16m Draft D2
Proposed TGm Plans continued…
• If TGm LB#1 NOT initiated after this meeting:
– Session #63 – Aug 31-Sept 3, Jeju, Korea
• Continue Call for comments on the AWD
• Do AWD comment resolution and Update AWD
– Session #63.5 – Sept 21-24, Hawaii, USA
•
•
•
•
Feature DGs meet and prepare AWD text
Do AWD comment resolution and Update AWD
Prepare P802.16m Draft D1
Initiate LB#1 after meeting
– Session #64 – Nov 16-19, Atlanta, USA
• LB #1 Comment resolution based on P802.16m Draft D1
• New Updated draft P802.16m Draft D2 generated
• LB recirculation #2 initiated based on P802.16m Draft D2
Process for staging 802.16m Amendment feature
development
PHY/MAC
features
required for
IMTAdvanced for
a working
system
P802.16m draft
AWD
Feature inclusion vote
SB
WG LB
75%
50%
Final feature addition meeting
50%
Feature 1
DG
Feature 2
DG
Feature N
DG
Feature N+1
Amendment Feature development:
-Feature developed as a DG contribution to TGm
-Finally included only as a complete proposal, not a partial one
-Develop as a self contained clause/subclause unless it is essential
-Do not put place holders in Amendment till the feature is ready.
(SDD will still have all features)
-DGs should track Amendment development for consistency
-WG LB recirculation scope should allow feature addition
-All features have to go thru at least one WG LB recirculation
Next Project (New PAR)
DG
AWD = Amendment Working Doc
DG = Drafting Group
LB = Letter Ballot
5
SB= Sponsor
Ballot
Feature DG process for the
Amendment
• Feature Drafting Groups (DG) will develop contributions for adoption
by TGm as per Process (in previous slide)
• DGs will be authorized/re-authorized at each TGm session
• TGm will provide final deadlines for completion of DG work.
• DG must start with a work plan based on TGm final deadlines.
• DGs must report progress at every TGm session
• DG final output contribution must be complete by TGm deadlines for
adoption into the AWD/Draft
• DGs may meet during TGm sessions
• DGs can arrange teleconferences with 7 day advance notice
• DGs conduct straw polls for decision making
• DGs are open to all participants
• Letter Ballot comments related to feature topics may be assigned to
the DGs for harmonization before resolution by TGm
6
Amendment Feature DG timelines
Essential for
IMT-Adv. at
Amendment
level detail
SDD
Cha
pter
Features to be discussed
in DGs
CFC Issued for Features
(Contributions due:
Session #63.5)
DG Target
for
completion
12
Inter-Radio Access
Technology Functions (No
SDD text)
No
NA
----
13
LBS
No
July’09
Nov’09
14
E-MBS
No
July’09
Nov’09
15
Relay
No
July’09
Nov’09
16
Co-deployment and Coexistence (No SDD text.
Section deleted this
session)
No
NA
----
17
Femtocell
No
May’09, Femto DG can
<continue or stop> this session
Sept’09
18
Self organizing networks
No
July’09
Nov’09
20
Interference Mitigation
No
Mar’09 , Will now be treated of
AWD.
Sept’09
22
Inter-ABS Synchronization
No
Treated as part of AWD
Nov’09
7
Proposed Updates to TGm
Workplan
• Adopt into the TGm Work plan:
– Updates to the slides 5, 6 & 7 in the 802.16m09/0019r1 based on the slides 5, 6, 7 in this
contribution
Motions to TGm
• Motion: To adopt the updates (specifically
slides 5,6 & 7) provided in contribution
“C80216m-09/1646” to the TGm Workplan
(802.16m-09/0019r1)
Moved:
Second: