Transcript IEEE C802.16p-11/0003

The reliable delivery between 802.16p BS and M2M device
Document Number:
IEEE C802.16p-11_0003
Date Submitted:
2011-03-04
Source:
Chuan-Yuan Tseng , Whai-En Chen, Yu-Chan Lin
Email: [email protected] , [email protected]
NIU
Re:
802.16p amendment texts
Purpose:
Discuss and adopt proposed texts
Notice:
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the
participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to
add, amend or withdraw material contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the
creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this
contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor
also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
1
Motivation
 According to the SRD
6.2.6 The 802.16p system shall support efficient mechanisms for network
access from large numbers of M2M devices.
 According to the SRD
6.2.5 The 802.16p system shall support efficient and reliable delivery of
control and data to and from a large number of devices.
 We propose to enhance the reliability for multicast delivery in
802.16p system between BS and M2M devices.
2
Introduction
3
Proposed device reliable delivery
• There are two ways to enhance the multicast reliability:
– UL feedback
– retransmission
• The UL feedback may cause extra UL overhead.
• We propose to use retransmission mechanism where the
BS transmits the same multicast packet several times.
• The value of the retransmission times depends on the rate
of successful multicast transmission.
4
Example
5
Proposed Text
[Insert the following texts in 16p amendment document] :
----- Text Start ----– 16.2.x multicast reliability
-In order to enhance the reliability for multicast delivery, the
802.16p BS should transmits a multicast packet multiple times.
The value of the repeat time is TBD.
----- Text End -----