Transcript 下載/瀏覽

班級:碩研機械二甲
姓名:鄧文斌
指導老師:曾信智
南台科技大學 精密製造實驗室，102年8月8日
Introduction─
Current industry products with a thin, low weight, small size, and green, so as
to reduce material costs and increase productivity, such as lignocellulosic
materials to replace glass fiber thermoplastic composites.
This can be found by the mold temperature is the most important parameter
will affect the strength of injection, volume shrinkage and warpage amount, so
this study, wood cellulose, reinforced polymer composites, relatively thinwalled parts in the injection molding , volume shrinkage and warpage amount
will obviously change.
南台科技大學 精密製造實驗室，102年8月8日
Methodology─
In Figure 1, the use of Autodesk Inventor model drawn thin-walled parts; work
size 55mmX50mmX0.7mm, followed by re-use Moldflow injection mold flow
analysis software simulation and analysis.
南台科技大學 精密製造實驗室，102年8月8日
Figure 2 is a waterway and gate design, the use
of software construction grid mesh.
Injection Molding Machine
Argburg Allrounder 370c
Material
PP +50% wood composite
materials
南台科技大學 精密製造實驗室，102年8月8日