Transcript Item 6fi - Haeberle - New Business 3 - API 6ACRA - Haeberle R0

New Business – Proposal For Approval of SR3 For
Addendum to API 6ACRA
Presented by Tim Haeberle
Chief Consulting Engineer – Materials and Processes
GE Oil & Gas
3 February 2016
Imagination at work.
API SC6 Spring, TX
Background
•
Special Metals has requested this change.
•
Alloy 945 and its higher strength modification, Alloy 945X, have been covered
by the same UNS number, UNS N09945 in API 6ACRA and ISO 15156/NACE
MR0175.
•
In 2015, Special Metals requested and received a unique UNS number, UNS
N09946, for Alloy 945X.
•
Additionally, Special Metals has successfully balloted UNS N09946 for
inclusion in ISO 15156/NACE MR0175 with a new higher hardness maximum.
•
In conjunction with these changes, the recently released API 6ACRA 1st
Edition now needs to be revised to add an addendum to incorporate the
requirements for UNS N09946.
•
This change will enable equipment manufacturers and oil and gas producers to
specify UNS N09946 in accordance with API 6ACRA, thereby reducing the risk
of the material being embrittled by the presence of an excessive level of
deleterious phases.
2
Action Required Today – Approval of the SR3
•
ISO is expected to issue a Technical Circular to
15156/NACE MR0175 in Q1 or Q2 that will add UNS
N09946 into the document
•
An approved SR3 is needed to allow the API TG for
API 6ACRA to activate to take action on this issue
•
However, the API TG for 6ACRA will not move
forward and work on this limited change to API
6ACRA until UNS N09946 has been formally added to
ISO 15156/NACE MR0175
•
The action required today is API SC6 approval of the
proposed SR3
•
Thus, a motion is made to approve the SR3 .
3
Thank you.
BACKUP SLIDES
Title or Job Number | XX Month 201X
See tutorial regarding
confidentiality disclosures.
6
Specific changes requested
Table 1 – Chemical Composition:
•
Add UNS N09946 composition and adjust footnotes accordingly
Section 4.1.2.1.3 – Melt Practice:
•
Add UNS N09946
Table 2 – Heat Treatment Procedures:
• Delete the 140K material designation from the row for UNS N09945
• For UNS N09945, change the 125K material designation to 130K
• Add a row for UNS N09946 and include both 140K and 160K, with the same heat treatment parameters
Table 5 – Tensile Properties:
• For UNS N09945, change the 125K material designation to 130K and delete the 140K listing 1
• Add a row for UNS N09946 and include both 140K and 160K material designations 1
Table 6 – Charpy V-Notch Impact Toughness Requirements
• For UNS N09945, change the 125K material designation to 130K and delete the 140K listing 1
• Add a row for UNS N09946 and include both 140K and 160K material designations 1
Table 7 – Hardness Requirements:
•
For UNS N09945, change the 125K material designation to 130K and delete the 140K listing 1
•
Add a row for UNS N09946 and include both 140K and 160K material designations 1 .
1
Special Metals to supply properties
7