Transcript IEEE C802.16m-08/936

Proposal for IEEE 802.16m CQI Feedback Channel Framework
Document Number: C80216m-08/936
Date Submitted: 2008-09-05
Source:
Rath Vannithamby, Hongmei Sun, Jong-Kae (JK) Fwu,
Changlong Xu, Hujun Yin, Sassan Ahmadi
Intel Corporation
E-mail: {rath.vannithamby, hongmei.sun, jong-kae.fwu
changlong.xu, hujun.yin, sassan.ahmadi} @ intel.com
Venue:
IEEE Session #57, Kobe, Japan.
Re: PHY: Text; in response to the TGm Call for Contributions and Comments 802.16m-08/033 for Session #57
Base Contribution:
N/A
Purpose:
For TGm discussion and adoption of 802.16m SDD text.
Notice:
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in
the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an
IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s
sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this
contribution may be made public by IEEE 802.16.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
1
Primary/Secondary Fast Feedback Channel Framework
We need to have 2 fast feedback channels with different feedback frequency, robustness
and coding to improve efficiency. “primary” feedback channel is used to periodically
receive channel and other required information from MS reliably. And “secondary”
feedback channel is required to achieve an efficient scheduling gain and support all
traffic demands with higher capacity.
•
Primary fast feedback channel (PCQICH)
– To facilitate a reliable basic connection
– Less frequent, Low rate, periodic
•
Secondary fast feedback channel (SCQICH)
–
–
–
–
To optimize performance and improve channel efficiency
High frequent, High rate, periodic/event-driven
Traffic demand dependent
Link adaptation is needed to supports advance features efficiently
•
•
Amount of CQI feedback information can be high based on FSS, FFR and
MIMO feedback required
LA is coarse: based on users’ long term channel statistics
2
Primary/Secondary Fast Feedback Channel Protocol
•
PCQICH
– Designed to provide users with periodic and robust transmission
– BS makes decision and regulates UE’s CQI feedback behavior
•
•
•
Resource allocation
Feedback frequency
SCQICH
– Allocated/updated adaptively based on channel/traffic variation and
required MIMO support
– Transmission can be event driven
– BS decides and schedule below information to SS
•
whether to allocate, when to allocate, the amount of resource and
corresponding index, transmission frequency, rate
3
Multiplexing of Primary/Secondary Fast Feedback Channels
• PCQICH and SCQICH can have different physical structure
– Different pilot patterns can be supported
– Physical structure designs are optimized for different application (low
rate vs. high rate, robust vs. adaptive, etc).
• Within PCQICH/SCQICH
– Multiple channels/users are FDM/TDM multiplexed within one
subframe
• UL fast feedback channels are FDMed with other UL control and
data channels
4
Conclusion
• 2 different physical fast feedback structures (PCQICH,
SCQICH) are designed and optimized for different
applications
– Different feedback frequency, robustness and coding design
– PCQICH covers all users with periodic and robust transmission
– SCQICH is optimized for users needing narrowband CQI/MIMO
feedback with adaptive rate for higher efficiency on demand
• Within PCQICH/SCQICH, multiple users are FDM/TDM
multiplexed within one subframe
5
Text Proposal #1 to IEEE 802.16m SDD
Revise the text in red with following modified text in blue (Chapter 11 in
[IEEE 802.16m-08/003r4 ])
11.9.2.1 UL Fast Feedback Channel
Replace
“The UL fast feedback channel is classified into multiple logical channels per
user. The mapping of these logical channels into one or multiple physical
channels is FFS”
with
“The UL fast feedback control channel is classified into two types, primary
and secondary fast feedback channels. The UL primary fast feedback
control channel provides fixed rate robust connection. The UL secondary
fast feedback control channel provides higher throughput with variable rate
to carry channel quality and MIMO related feedback information”
6